EleSSaRBLS
iCX Member
- Total Posts : 385
- Reward points : 0
- Joined: 2009/11/18 14:07:42
- Status: offline
- Ribbons : 5
Re:X58 Stability Club
2011/04/01 04:32:19
(permalink)
I remember I had to replace the intel_xeon32 and 64 files with 0.6.4 and it took my gflops from 56 to 80gflops, but I don't know if that was the newest one, all you can clearly see I made 21 runs and HT is on. If the newest ones were created in march then I couldn't have been on those. Like I said no big deal though, for the overclock I had I should have had higher gflops considering it was a 5.2ghz oc. This is the run: 
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/01 05:26:02
(permalink)
Looking at your clock speed vs gflops I have to say you did not have the latest linpack binaries. Sorry, but you need to submit a new stability test screenshot.
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re:X58 Stability Club
2011/04/01 07:32:42
(permalink)
I just noticed that the newest version of linpack is 10.3.3. The link from the other day contains files from linpack 10.3.2. They both support gulftown so I doubt there is much of a difference. But just to stay current I have changed the files once again with 10.3.3 and will host LinX 0.6.4 with those files here: http://www.mediafire.com/?rw6k3vlsa486bja @kram36 If you could change the mediafire link in the OP to this one, that would be great. Just so people download the newest version. 
post edited by jethc9 - 2011/04/01 09:54:21
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
shogon
CLASSIFIED Member
- Total Posts : 2305
- Reward points : 0
- Joined: 2008/08/30 09:27:20
- Location: CA
- Status: offline
- Ribbons : 7
Re:X58 Stability Club
2011/04/01 14:00:19
(permalink)
poop I can't go higher on my QPI lol :/
I will either find a way, or make one. ٩(๏̯͡๏)۶
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/01 17:33:09
(permalink)
jethc9
I just noticed that the newest version of linpack is 10.3.3. The link from the other day contains files from linpack 10.3.2. They both support gulftown so I doubt there is much of a difference. But just to stay current I have changed the files once again with 10.3.3 and will host LinX 0.6.4 with those files here:
http://www.mediafire.com/?rw6k3vlsa486bja
@kram36
If you could change the mediafire link in the OP to this one, that would be great. Just so people download the newest version.
Done. Thank you!
|
Arctucas
SSC Member
- Total Posts : 868
- Reward points : 0
- Joined: 2007/05/20 15:35:18
- Status: offline
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 18:38:52
(permalink)
Arctucas i7 950 Batch #3008A996 CPU clocked at: 4273 MHz Voltage: 1.33125V Idle temps: 34, 30, 34, 30 Load temps: 68, 65, 67, 64 GFlop peak: 55.7585 
post edited by Arctucas - 2011/04/01 19:04:37
|
Bluebrains
SSC Member
- Total Posts : 544
- Reward points : 0
- Joined: 2009/03/11 13:50:19
- Location: Michigan
- Status: offline
- Ribbons : 1
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 20:04:23
(permalink)
Bluebrains Core i7 980x CPU Clocked at 4509.8MHz Voltage: 1.423 Idle temps: 19, 33, 27, 24, 32, 33 Load temps: 84, 83, 78, 75, 86, 82 GFlop peak: 80.2477 
post edited by Bluebrains - 2011/04/04 19:42:18
5820K@3.30GHz Corsair H100i Evga FTW K motherboard Corsair 750D case 32" 4k Dell Display G. Skill 32G memory Western Digital 1T HD Evga SuperNOVA 1300W DVD Evga 1080 Windows 10 Pro 
|
finiousfingers
iCX Member
- Total Posts : 377
- Reward points : 0
- Joined: 2008/12/10 12:16:01
- Status: offline
- Ribbons : 2
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 20:33:26
(permalink)
Finiousfingers Core i7 920co CPU clocked at: 4231.5 Voltage: 1.45 without vdroop Idle temps: 36-38C Load temps: 84-88C GFlop peak: 54.4356 WOOOT 
post edited by finiousfingers - 2011/04/02 07:17:56
Attached Image(s)
+1 My Rig Please and Thank You CPU: i7 980X OCd to 4.4Ghz | Board: EVGA X58 FTW3 | Power: EVGA SuperNova 1300 G2 | RAM: G-Skill Perfect Storm 2000 mhz. @8-8-8-21 | Case: Haf 932 | Cooler: Corsair H110 | GPU: 770 4GB x2 SLI Antivirus programs are like condoms. If you don't use them right then they won't work no matter how nice they look or feel.
|
finiousfingers
iCX Member
- Total Posts : 377
- Reward points : 0
- Joined: 2008/12/10 12:16:01
- Status: offline
- Ribbons : 2
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 20:38:21
(permalink)
+1 My Rig Please and Thank You CPU: i7 980X OCd to 4.4Ghz | Board: EVGA X58 FTW3 | Power: EVGA SuperNova 1300 G2 | RAM: G-Skill Perfect Storm 2000 mhz. @8-8-8-21 | Case: Haf 932 | Cooler: Corsair H110 | GPU: 770 4GB x2 SLI Antivirus programs are like condoms. If you don't use them right then they won't work no matter how nice they look or feel.
|
kingofsorrow
SSC Member
- Total Posts : 864
- Reward points : 0
- Joined: 2007/03/08 07:11:22
- Location: RF
- Status: offline
- Ribbons : 2
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 20:51:07
(permalink)
finiousfingers - love your voltage 
i7 990x@ 4.41Ghz 1.375v | Evga Classified E762 | 12Gb CM12GX3M3A2000C9 | GeForce Titan X SLi | HAF-X | ST1500
|
Drey070
iCX Member
- Total Posts : 298
- Reward points : 0
- Joined: 2007/06/16 09:44:21
- Location: NE Philly
- Status: offline
- Ribbons : 0
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 21:58:40
(permalink)
hmm is that a D0 chip ???
I7 4930K @ 4.6 GHz -_- RIVBE -_- 2x EVGA GTX 1080Ti Hydro Copper -_- 4x 4gb G.Skill 2133MHz -_- Corsair AX1500i
|
Knightviper
SSC Member
- Total Posts : 610
- Reward points : 0
- Joined: 2009/08/30 07:55:55
- Location: Kirkcaldy Fife Scotland
- Status: offline
- Ribbons : 2
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 21:59:07
(permalink)
Just a quick question can you use EVGA Precision to monitor insted of CPU-Z
EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green EVGA 1070Ti FTW 2 EVGA 1300w G2 Windows 10 64-bit Evga DG-87 
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 22:08:00
(permalink)
Knightviper
Just a quick question can you use EVGA Precision to monitor insted of CPU-Z
I suppose it would be fine and that you meant ELEET, not Precision, but if I see unusually low gflops for your clock speed or large variances in the gflops I'm going to call shenanigans on the test because ELEET can change clock speeds. CPU-Z is a quick download and install. 
|
Knightviper
SSC Member
- Total Posts : 610
- Reward points : 0
- Joined: 2009/08/30 07:55:55
- Location: Kirkcaldy Fife Scotland
- Status: offline
- Ribbons : 2
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/01 22:14:12
(permalink)
not a prob mate will get cpu-z downloaded when i get back from work the day
EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green EVGA 1070Ti FTW 2 EVGA 1300w G2 Windows 10 64-bit Evga DG-87
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/02 01:51:01
(permalink)
All Right I am in: Rafale i7 980X 3032A341 4.33GHz @ 1.375V Vdroop disabled Idle temps 26/16/27/35/33/22 Max Load Temp 76/73/71/75/81/76 84.47 peak Gflop Room Temperature was 25C when the benchmark was run 
post edited by rafale - 2011/04/02 02:04:01
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/02 03:30:24
(permalink)
Damn, nice results Rafale, but I don't get how your room temp can be 25C when some of your CPU cores are falling below 25C  Inaccurate core readings I assume? That's some impressive Kuhler performance though, I'll have to admit.
 “The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/02 03:52:40
(permalink)
Yeah the core temp readings do not seem to be calibrated the same. I am not sure why. I have had 3 980x and their temp distribution accross different cores were never the same.
|
sgtharry
CLASSIFIED Member
- Total Posts : 2411
- Reward points : 0
- Joined: 2006/01/22 06:52:45
- Location: MA.,U.S.A.
- Status: offline
- Ribbons : 8
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/02 05:23:27
(permalink)
Good Job finiousfingers! Glad to see that my old original 920 CO (voltage hog) chip is still going strong. It's a good chip. 
|
rexrzer77
Superclocked Member
- Total Posts : 206
- Reward points : 0
- Joined: 2009/04/21 22:40:11
- Status: offline
- Ribbons : 11
Re:X58 Stability Club
2011/04/02 05:30:14
(permalink)
 rexrzer77 All data is in the JPEG also: Core i7 920 D0 @4315Mhz - On Air ONLY Batch#3849B056 - Turbo Boost & HT "ON" VCore 1.32500V + 125MV VTT Idle Temps-36,42,40,42 Load Temps-86,90,90,93 I used the LinX in the download on Page No.1 of this Stability thread, and did it all by the book-ie the LinX 0.64 with the new binaries on the 1st page of this thread. If the GFlops don't look high enough for your purposes you can fault the LinX on Page No.1 here...not my run. This is my Rig no.3 for FAHome, it's in my signature also. Have a great day, and low voltage rules! rexrzer77 
Attached Image(s)
No.1-Core i7 970+Megahalems+24GB Hyper-X RAM (6x4GB)+Areca 1680IX-8 Hardware RAID 8TB+2 GTX 560Ti SC SLI+Asus Xonar Essence ST Audio Card +Corsair HX1050+EVGA E760 Classy+HAF 932+24/7 4.2Ghz ON AIR 1.34V No.2-Core i7 920 D0 Lapped+6GB G.Skill RAM+HAF 922+24/7 4.2Ghz ON AIR No.3-Core i7 920 D0+6GB Patriot RAM+CM Advance+24/7 4.2Ghz ON AIR 
|
sgtharry
CLASSIFIED Member
- Total Posts : 2411
- Reward points : 0
- Joined: 2006/01/22 06:52:45
- Location: MA.,U.S.A.
- Status: offline
- Ribbons : 8
Re:X58 Stability Club
2011/04/02 06:05:39
(permalink)
 Damn good job rexrzer77! Very impressive on AIR!
|
finiousfingers
iCX Member
- Total Posts : 377
- Reward points : 0
- Joined: 2008/12/10 12:16:01
- Status: offline
- Ribbons : 2
Re:X58 Stability Club
2011/04/02 07:27:26
(permalink)
Thanks all that helped me get there, I am stil learning and am loving the new challenges of a custom rig.
+1 My Rig Please and Thank You CPU: i7 980X OCd to 4.4Ghz | Board: EVGA X58 FTW3 | Power: EVGA SuperNova 1300 G2 | RAM: G-Skill Perfect Storm 2000 mhz. @8-8-8-21 | Case: Haf 932 | Cooler: Corsair H110 | GPU: 770 4GB x2 SLI Antivirus programs are like condoms. If you don't use them right then they won't work no matter how nice they look or feel.
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/02 08:04:22
(permalink)
Get everyone added. Nice job to all!
|
scvette
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2009/11/26 08:58:39
- Location: Austin, Tx + Loveland, Co
- Status: offline
- Ribbons : 1
Re:X58 Stability Club
2011/04/02 09:05:39
(permalink)
Thanks for the Gulftown binaries. I ran a quick 20 passes on my big machine and pulled the following. Now its time to tweak and get the GFs up some.  980x 29x150 Watercool 3.0 block 12 Gigs Dominator ram 3x4Gb boards watercooled scvette
Core i7 980x CPU clocked at: 4.339Ghz Voltage: 1.341v Idle temps: 24, 28, 28, 24, 30, 30 Load temps: 61, 64, 59, 57, 63, 66 GFlop peak: 79.2205 GFlops peak 
post edited by scvette - 2011/04/02 09:29:03
 Affiliate Code: 67QDY2U4KX Evga 770, I7 980x at 4.4ghz EK full cover waterblock and Heatkiller 3.0 Cpu block 3x EVGA gtx580 HC2 ftw Sli 2x Patriot 64GB SSD raid 0 -- 2x Raptor 300GB raid 0 -- 1TB WD black Corsair AX 1200 psu 3x Samsung 305T 30" 7680x1600 surround 3 radiators, 9 fans, 2 fan controllers, 2SSDs, 3Hard Drives, BluRay burner, 2bay xspc reservoir and 2x 355 pumps w/ dual loops all inside a HAF 932 case
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/02 09:38:12
(permalink)
Hey Kram, I should be at the top of the Gulftown list. I got the best Gflops. That's because my RAM is at 1955MHz and I left my my QPI@6.4GT (6.7GT effectively) and my uncore at 2x (=3910MHz)  SCvette, Come on you can do better than that on water... gogogo!
post edited by rafale - 2011/04/02 09:42:35
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/02 09:42:51
(permalink)
Your GFlops are killer, but the list goes by clock speed. If I round yours up to 4.33Ghz I would also have to round up the other two currently in front of you to 4.34Ghz and they would still be in front of you. GFlops is used to break clock speed ties.
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/02 10:08:59
(permalink)
I know, I was just kiddin' 
|
Knightviper
SSC Member
- Total Posts : 610
- Reward points : 0
- Joined: 2009/08/30 07:55:55
- Location: Kirkcaldy Fife Scotland
- Status: offline
- Ribbons : 2
Re:X58 Stability Club
2011/04/02 12:14:37
(permalink)
Eh up i've shut everything down and I cant get the base level for the problem size I'm running 6Gb of corsair Dominator GT Ram on Win 7
Problem size I can get is 23,050
any help on this please
EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green EVGA 1070Ti FTW 2 EVGA 1300w G2 Windows 10 64-bit Evga DG-87
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/02 12:18:02
(permalink)
Run msconfig and look at the start up items. Disable the ones not needed and reboot.
|
Knightviper
SSC Member
- Total Posts : 610
- Reward points : 0
- Joined: 2009/08/30 07:55:55
- Location: Kirkcaldy Fife Scotland
- Status: offline
- Ribbons : 2
Re:X58 Stability Club
2011/04/02 12:20:10
(permalink)
Do this off line then cos I dont want to connet to the tinters with out protection
EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green EVGA 1070Ti FTW 2 EVGA 1300w G2 Windows 10 64-bit Evga DG-87
|
Knightviper
SSC Member
- Total Posts : 610
- Reward points : 0
- Joined: 2009/08/30 07:55:55
- Location: Kirkcaldy Fife Scotland
- Status: offline
- Ribbons : 2
Re:X58 Stability Club
2011/04/02 12:32:05
(permalink)
everything shut off like you said and the Higest problem size I can get is 24,768Mb can anyone help on getting me to the 25,000 problem size?
EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green EVGA 1070Ti FTW 2 EVGA 1300w G2 Windows 10 64-bit Evga DG-87
|