EVGA

Z170 Classified-K BIOS 1.02

Author
Post
Essentials Only Full Version
TECH_DaveB
EVGA Alumni
  • Total Posts : 4893
  • Reward points : 0
  • Joined: 2008/09/26 17:03:47
  • Status: offline
  • Ribbons : 46
2016/01/27 18:04:03 (permalink)
BIOS 1.02 Updates
  • Support Non-K CPU BCLK OC
  • Improving memory compatibility
  • Improving internal graphics performance
  
 
Windows Installation
  • Download the correct .zip file below for your motherboard:
         142-SS-E178-KR - EVGA Z170 Classified-K


  • First go into your BIOS and load defaults, save and exit
  • Close all open programs.
  • Go into the folder where you unzipped this package and update.bat
  • Press Y to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
  • NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
  
BIOS Installation
  • Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
  • Reboot the machine and go into the system BIOS
  • From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
  • Select the .bin file you wish to flash.
#1

4 Replies Related Threads
    mrkwhlr2
    SSC Member
    • Total Posts : 584
    • Reward points : 0
    • Joined: 2008/05/26 13:53:35
    • Status: offline
    • Ribbons : 1
    Re: Z170 Classified-K BIOS 1.02 2016/02/09 07:13:58 (permalink)
    I have a question about updating the bios for this board, as with many other boards when running RAID0. how can you load defaults and exit when running raid? you will not be able to boot to windows. I assume it to be ok to save to default, enable the raid function to at least get you to boot, right?

     
    Corsair Obsidian 800D |  EVGA Z490 Dark | EVGA 2080 ti  Hydro Copper | i9 10900K w/EK Supreme HF H20 block | 2x500gb Samsung 980 PRO M.2 Gen 4.0 | 2x8gb G.Skill Trident Z Royal DDR4 4000 | EVGA SuperNOVA 850 T2  | r.i.p JH......


     
    #2
    muzza85
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2016/02/12 07:06:44
    • Status: offline
    • Ribbons : 0
    Re: Z170 Classified-K BIOS 1.02 2016/02/13 15:29:59 (permalink)
    How can i do this when i cant accsess bios. I really dont want to spend money on new ram and im hoping the update will help. As my ram isnt compatible
    #3
    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: Z170 Classified-K BIOS 1.02 2016/02/13 17:07:07 (permalink)
    muzza85
    How can i do this when i cant accsess bios. I really dont want to spend money on new ram and im hoping the update will help. As my ram isnt compatible


    What ram are you using and are you using all sticks or just 1? Please post part numbers also. You can update the bios in Windows, but you obviously need to get there first.

    If you have a spare PC, you can try to recover the bios and install it on a drive, then install it through the bios without going into windows.

    You would need to use 1 stick of RAM to do so, of course. Try the 1 stick in ram slot 1, and see if it will get to the bios for you. If you can, then you should be able to access windows to update. If not, then you may need to look at a very cheap single stick of ram that is compatible, just long enough to access the bios.


    TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
    #4
    jlevchuk84
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2016/04/24 01:47:05
    • Status: offline
    • Ribbons : 0
    Re: Z170 Classified-K BIOS 1.02 2016/12/04 13:06:02 (permalink)
    Edit: Nevermind.
    post edited by jlevchuk84 - 2016/12/04 14:54:46
    #5
    Jump to:
  • Back to Mobile