nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
*UPDATE* Made some blocks for the X99 Micro 2. A few are ready to ship.  email link is in the sig below. ____________________________________________________________________________ I have got a few emails regarding interest. Does anyone else have an interest? I am talking about a low budget (not low quality) no-frills high flow chipset block. The board looks easy enough, and if there is enough interest I can make it happen.
post edited by nateman_doo - 2016/07/08 21:19:02
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/02 21:04:17
(permalink)
|
Philwong
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2015/11/28 06:38:25
- Location: Singapore
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/02 21:09:06
(permalink)
Can we have an indication of the cost? Plus shipping to Singapore as well. How about a VRM block too?
Intel i7-5930K EVGA Micro 2 Corsair LPX 32GB Palit GTX970 SLI Dell U2414H x 3 Samsung 950 Pro WD Green 6TB Corsair HX1000i
|
SAMART
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2010/05/24 00:57:33
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/03 06:55:40
(permalink)
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/04 06:44:12
(permalink)
Philwong
Can we have an indication of the cost? Plus shipping to Singapore as well. How about a VRM block too?
Hard to say, I dont have the board in front of me, so I dont know the sizes of the materials that I need. Also the time to produce depends on the size of the block(s). A single large block, 2 smaller blocks etc. I dont know until I have a board sitting in front of me. I dont own one, so I would need a donor board to measure. What I can say.. is that getting a custom CNC machined part from me..I don't charge anywhere what a shop would charge, but realize your getting a custom made piece that is available no other place. They are generally a bit more then conventional blocks, but your getting a custom made block.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: X99 Micro 2 Waterblock
2015/12/04 08:06:46
(permalink)
You can try to design monoblock and charge more...
On that way people will use only 2 fittings instead 4 and they will have much less problems with water cooling graphic cards.
EVGA X99 Micro 2 with monoblock in some aluminum mATX Lian-Li. ...Hmmm... nice.
ASUS ROG boards fit better in Silverstone case, EVGA in Lian-Li and Caselabs.
|
ArticBlast
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2014/12/10 15:04:00
- Status: offline
- Ribbons : 1
Re: X99 Micro 2 Waterblock
2015/12/04 13:19:51
(permalink)
Nateman_doo's blocks are worth the price! Trust me :)
5960X @ 3.9 GHz || EVGA X99 Classified || GTX 980 SC 3xSLI @1.5 GHz || G.Skill 8x8gb DDR4-2400 || EVGA 1600 P2 || Enthoo Primo White|| 2 x Samsung 850 512GB RAID 0 || 3 x 4TB NAS drives RAID 5|| Custom watercooling -NatemanDoo blocks 
|
Philwong
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2015/11/28 06:38:25
- Location: Singapore
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/05 21:24:01
(permalink)
nateman_doo
Philwong
Can we have an indication of the cost? Plus shipping to Singapore as well. How about a VRM block too?
Hard to say, I dont have the board in front of me, so I dont know the sizes of the materials that I need. Also the time to produce depends on the size of the block(s). A single large block, 2 smaller blocks etc. I dont know until I have a board sitting in front of me. I dont own one, so I would need a donor board to measure.
What I can say.. is that getting a custom CNC machined part from me..I don't charge anywhere what a shop would charge, but realize your getting a custom made piece that is available no other place. They are generally a bit more then conventional blocks, but your getting a custom made block.
Noted. Guess the first step is to wait for sufficient interest. Phil
Intel i7-5930K EVGA Micro 2 Corsair LPX 32GB Palit GTX970 SLI Dell U2414H x 3 Samsung 950 Pro WD Green 6TB Corsair HX1000i
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/08 23:43:00
(permalink)
I got a board if you need it?
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/09 07:36:08
(permalink)
I will need a donor board to measure up and test fit.
So far, 3 have an interest:
anthony.yarlott
SAMART
Vlada011
I was hoping to at least have 10 bodies. Hit that number and I will start the design process..
|
Philwong
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2015/11/28 06:38:25
- Location: Singapore
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/16 21:57:48
(permalink)
Intel i7-5930K EVGA Micro 2 Corsair LPX 32GB Palit GTX970 SLI Dell U2414H x 3 Samsung 950 Pro WD Green 6TB Corsair HX1000i
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/17 14:12:56
(permalink)
So that makes 4. glad to have you along
|
paulmaddy1
New Member
- Total Posts : 36
- Reward points : 0
- Joined: 2014/03/28 02:13:10
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/23 11:46:37
(permalink)
Id be interested as im getting this board for my next build. Rather have a monoblock.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/24 11:37:30
(permalink)
|
TECH_DaveB
EVGA Alumni
- Total Posts : 4661
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 46
Re: X99 Micro 2 Waterblock
2015/12/24 15:37:39
(permalink)
ArticBlast
Nateman_doo's blocks are worth the price! Trust me :)
OH HECK YEAH THEY ARE! Philwong
nateman_doo
Philwong
Can we have an indication of the cost? Plus shipping to Singapore as well. How about a VRM block too?
Hard to say, I dont have the board in front of me, so I dont know the sizes of the materials that I need. Also the time to produce depends on the size of the block(s). A single large block, 2 smaller blocks etc. I dont know until I have a board sitting in front of me. I dont own one, so I would need a donor board to measure.
What I can say.. is that getting a custom CNC machined part from me..I don't charge anywhere what a shop would charge, but realize your getting a custom made piece that is available no other place. They are generally a bit more then conventional blocks, but your getting a custom made block.
Noted. Guess the first step is to wait for sufficient interest.
Phil
I'm sure we will get the interest, honestly any board I get that does NOT have a block for it, or not a block that really fits my needs, I will go with one of his whenever possible. They are not cheap, but they are really good. Like I have said so many times, sometimes things cost more and in most cases you get what you pay for, there is a reason a Cadillac costs more than a Saturn, or in my particular experience, a reason why Blue Thunder FE intake costed more than an Edelbrok Performer RPM. Not cheap, not nearly as pricey as some others doing custom stuff either, but they work great and look great too.
|
Aibohphobia
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2014/09/27 16:35:58
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/24 17:26:25
(permalink)
Would it be possible to get a CAD file of the board Dave? It'd make stuff like this and checking heatsink compatibility much easier.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/24 20:07:13
(permalink)
Aibohphobia
Would it be possible to get a CAD file of the board Dave? It'd make stuff like this and checking heatsink compatibility much easier.
they dont usually let stuff like that go. Normally I get a board and have to measure it either manually, or place it on my CNC and indicate holes with a delrin rod I made specifically for that tasking.
|
Aibohphobia
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2014/09/27 16:35:58
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/24 22:32:10
(permalink)
It's a long shot but I don't see why not for a motherboard. It's not like someone could clone a motherboard from just a CAD model of its physical geometry.
Anyway, I have a Micro2 that I'm not using. I was going to sell it but accidentally bent one of the CPU pins. I was able to bend it back but I don't feel comfortable selling it since it doesn't have warranty anymore.
If you get enough interest for a block and EVGA isn't willing to provide a CAD file let me know and you can borrow my board for measurements.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/25 12:14:12
(permalink)
Thats very kind of you. thank you
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/26 20:53:36
(permalink)
Are you going to do a mono block or single blocks?
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/26 21:01:23
(permalink)
I would like to see a mono block I would pay extra for it?? I just like the looks a simplicity of them only requiring two water fittings. If you could include the ram that would be an insane set up, I started on some mastercam drawings but have not finished. Need to get it approved for my senior project, they don't want me to cut acrylic in the cnc mills.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/28 08:16:42
(permalink)
anthony.yarlott
I would like to see a mono block I would pay extra for it?? I just like the looks a simplicity of them only requiring two water fittings. If you could include the ram that would be an insane set up, I started on some mastercam drawings but have not finished. Need to get it approved for my senior project, they don't want me to cut acrylic in the cnc mills.
I honestly have no idea until I get the board. A mono block may be possible, but it will drive the cost up. I have done a monoblock for the Stinger board, and it was quite complicated, but it worked like a champ because of the time I put into it. http://forums.evga.com/FindPost/2249553 I want you guys to click on that link, and go through the thread. That is the most recently designed waterblock from start to finish. It shows the ludicrous amount of work that I have to do from start to finish. That includes the engineering design, the fixture plate design, the prototyping and fitting, and production. It really is no easy task making these things. Also, you may have more resources to allocate to this project vs some others may only be able to afford single blocks. I try to appease all, but sometimes it just isn't possible. The only mission that all can agree upon is to watercool the board. So having zero options, whatever I come up with will be better then the factory heatsink. By several orders of magnitude.
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/30 01:33:35
(permalink)
Sounds good I would be happy either way, finally got all my parts to start the build. Lets hope we get enough to start this epic show.
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2015/12/30 01:39:00
(permalink)
I did check out your stinger block some time ago, that is what got me excited about you doing a water block for the micro 2. So far nobody makes any I found so it is up to you to start this epic journey.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2015/12/30 18:38:28
(permalink)
Trust me... it will be a journey.
|
Scourge78
Superclocked Member
- Total Posts : 109
- Reward points : 0
- Joined: 2013/10/13 13:35:38
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2016/01/05 23:24:09
(permalink)
I would be interested in this also, good sir.
Also, +1 for a monoblock.
CPU -LGA2011-v3 i7-6850k VGA - EVGA 1080 8Gb Hybrid MOBO - Gigabyte GA-X99 Phoenix RAM - 64 Gb Corsair Dominator Power - EVGA SuperNOVA 1200 Platinum Display - Acer B286HK 4k monitor SSD - Samsung 950Pro 256Gb SSD - Intel 750 AIC 1.2Tb
|
Philwong
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2015/11/28 06:38:25
- Location: Singapore
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2016/01/05 23:55:46
(permalink)
7 now!! 3 more to go!
Phil
Intel i7-5930K EVGA Micro 2 Corsair LPX 32GB Palit GTX970 SLI Dell U2414H x 3 Samsung 950 Pro WD Green 6TB Corsair HX1000i
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2016/01/10 17:29:53
(permalink)
great! lets hope the first few are still committed.
|
anthony.yarlott
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/03/21 21:38:41
- Status: offline
- Ribbons : 0
Re: X99 Micro 2 Waterblock
2016/01/10 19:26:34
(permalink)
Still here, do we still only need 3 more people?
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: X99 Micro 2 Waterblock
2016/01/11 16:59:36
(permalink)
looks that way.
When we hit the 10, I will send out for a small deposit and then start the design process (when I get the donor board)
So far the list looks like this:
anthony.yarlott
SAMART
Vlada011
Philwong
paulmaddy1
Aibojphobia? (didnt specifically say interested, but had a donor board)
Scourge78
So we could be at 7, or 6 depending on Aibojphobia
|