X58:Need help with OC

Page: < 12345.. > >> Showing page 3 of 8
Author
Post
Essentials Only Full Version
Gomez99
CLASSIFIED Member
  • Total Posts : 2634
  • Reward points : 0
  • Joined: 2013/03/28 16:53:08
  • Location: L.A.
  • Status: offline
  • Ribbons : 12
Re:X58 Still! Need help with OC 2013/05/31 16:46:11 (permalink)
K post when you get the compound


#61
Gomez99
CLASSIFIED Member
  • Total Posts : 2634
  • Reward points : 0
  • Joined: 2013/03/28 16:53:08
  • Location: L.A.
  • Status: offline
  • Ribbons : 12
Re:X58 Still! Need help with OC 2013/06/02 20:17:52 (permalink)
Any updates?


#62
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/02 22:40:45 (permalink)
I like your enthusiasm :P, Since they don't ship the week-ends (it's 01:39 AM in Montreal, Quebec, Canada @ July 3, 2013), we'll have to wait a little longer..
 
Talk to you soon!
#63
Gomez99
CLASSIFIED Member
  • Total Posts : 2634
  • Reward points : 0
  • Joined: 2013/03/28 16:53:08
  • Location: L.A.
  • Status: offline
  • Ribbons : 12
Re:X58 Still! Need help with OC 2013/06/06 09:59:40 (permalink)
It's been a while how's it going?


#64
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/06 12:10:35 (permalink)
Still waiting after the fn compound :(... I really hope i'll get it by friday, I'll get mad otherwise. I'll tell you as soon as I get it!
#65
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/07 18:56:50 (permalink)
Got it! Wish me the luck to not f**k up :)
#66
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/08 01:47:36 (permalink)
Alright Guys, so I made it, I have my water-cooled PC. Sucks that the heatsink at the left of the CPU is so tall, I can't do a 100% push pull setup. I did however put the fan across the drive cages.
 
So:
Drive Cages (3 fans of Antec 1200 + Corsair's x1 fan) => Radiator (Corsair's x1 fan on top) => Radiator => 2 Antec 1200 fans for pull. So it's really not bad and cool looking, since I can see the EVGA logo on the heatsinks with the Corsair LED and stuff.
 
Sorry about the blabla.
 
It s**** though that by changing the cooling, for some reasons my Windows corrupted on my SSD. My only explanation would be wrong SATA port (#2 instead of #1). I though it was a CMOS issue, I lost my config at the cost of knowing it was really windows that ****ed up, thanks.
 
SO, I will put my settings back and tell you my new setup + new degrees with Prime95 very soon.
 
Thanks!
#67
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/08 06:37:50 (permalink)
xboxnissan

Alright Guys, so I made it, I have my water-cooled PC. Sucks that the heatsink at the left of the CPU is so tall, I can't do a 100% push pull setup. I did however put the fan across the drive cages.

So:
Drive Cages (3 fans of Antec 1200 + Corsair's x1 fan) => Radiator (Corsair's x1 fan on top) => Radiator => 2 Antec 1200 fans for pull. So it's really not bad and cool looking, since I can see the EVGA logo on the heatsinks with the Corsair LED and stuff.

Sorry about the blabla.

It s**** though that by changing the cooling, for some reasons my Windows corrupted on my SSD. My only explanation would be wrong SATA port (#2 instead of #1). I though it was a CMOS issue, I lost my config at the cost of knowing it was really windows that ****ed up, thanks.

SO, I will put my settings back and tell you my new setup + new degrees with Prime95 very soon.

Thanks!


Ok bud...keep us posted.

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#68
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/08 19:02:55 (permalink)
Mind Blowing. (at least for someone that always been air-cooled.)
 
Just to be on same page and update everything:
 
Mother Board ( EVGA X58 3SLI SN : 312 )     
CPU ( i7 920) (DO)                       
CPU Cooler ( Corsair H100i (Push-Pull Configuration) )   
Memory ( GSkills Triple Channel 12 GB DDR3 )   
PSU ( Thermaltake ToughPower 750W )   
GPU ( EVGA GTX570 )       
Operating System ( Windows 8 x64 )   

Frequency Control   
CPU Clock Ratio ( 20X )                                                                                            
CPU Host Frequency (Mhz) ( 186 )                                                                         
MCH Strap ( Auto )   
CPU Uncore Frequency (Mhz) ( 2981 mhz { 16X } )                                                   
CPU Clock Skew ( 0 ps )   
Spread Spectrum ( Disabled )   
PCIE Frequency (Mhz) ( 100 )  
   
Memory Feature           
Memory Speed ( Standard )   
Memory Control Setting ( Enabled )   
Memory Frequency ( 1067Mhz / 2:8 )                                                                   
Channel Interleave Setting ( 6 Way )   
Rank Interleave Setting ( 4 Way )   
Memory Low Gap ( Auto )   
tCL Setting ( 9 )   
tRCD Setting ( 9 )   
tRP Setting ( 9 )   
tRAS Setting ( 24 )   
tRFC Setting ( Auto )   
Command Rate ( Auto )   
tRL ( +0 )   

Voltage Control   
EVGA VDroop Control ( Without VDroop )   
CPU VCore ( 1.33750v )                                                                                                   
CPU VTT Voltage ( +100mV )   
CPU PLL VCore ( Auto )   
**IOH PLL VCore ( Auto )    
DIMM Voltage ( 1.5V )   
DIMM DQ Vref ( +0mV )   
QPI PLL VCore ( 1.20V )   
IOH VCore ( Auto )  
IOH/ICH I/O Voltage ( Auto )   
ICH VCore ( Auto )   
PWM Frequency ( 800 KHz )   

CPU Feature   
Intel SpeedStep ( Disabled )   
Turbo Mode Function ( Disabled )   
CxE Function ( Disabled )   
Execute Disable Bit ( Disabled )   
Virtualization Technology ( Enabled )   
Intel HT Technology ( Enabled )   
Active Processor Cores ( All )   
QPI Control Settings ( Enabled )   
QPI Link Fast Mode ( Enabled )   
QPI Frequency Selection ( 4.800 GT/s )   

PnP/PCI     PCI Express   
Maximum Payload Size ( 4096 )   
    
Power Management Setup   
ACPI Suspend Type ( S1(POS) )      
HPET Support ( Enabled )        
HPET Mode ( 64-bit )   
 
Idle : 40-41 34 38 34
21h19: 63-65 55-57 61-62 54-56
21h31: 65-66 58-59 63 57-58
21h41: 66-67 60-62 64 58-59
21h51: 65-67 57-60 62-64 58
21h58: 66-68 60-61 63-65 57-58
This is about 20% better :)
 
Alright, I'm ready for moreee :D
 
Let me know your suggestions!
 
Thanks!
post edited by xboxnissan - 2013/06/08 19:10:09
#69
Gomez99
CLASSIFIED Member
  • Total Posts : 2634
  • Reward points : 0
  • Joined: 2013/03/28 16:53:08
  • Location: L.A.
  • Status: offline
  • Ribbons : 12
Re:X58 Still! Need help with OC 2013/06/08 20:45:35 (permalink)
Same process as before, up the bclck until unstable then up the vcore


#70
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/08 21:14:59 (permalink)
So,
 
1: BaseClock to 191 => BSOD in booting windows
2: VCore v1.475 => v1.5 => Very Stable (20 minutes) and average of 70 for Core #1 and arround 66-68 for other cores
3: BaseClock to 196 => PC Frozed, reboots, what do I do?
 
I'll upload proper update.
post edited by xboxnissan - 2013/06/08 23:59:40
#71
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 00:35:37 (permalink)
Hi,
 
So I tried exacly this:
CPU Host Frequency (Mhz) ( 186 ) 
TO
CPU Host Frequency (Mhz) ( 191 ) 
 
So I had BSODs, I tried:
CPU VCore ( 1.33750v )
UP TO
CPU VCore ( 1.35000v )
AND
QPI PLL VCore ( 1.20V )  
UP TO
QPI PLL VCore ( 1.325V )
 
I'm scared to go further as I still get BSOD after one minute of usage..
 
Thanks for the help! 
#72
loveha
Omnipotent Enthusiast
  • Total Posts : 9918
  • Reward points : 0
  • Joined: 2009/09/26 01:51:22
  • Location: Beulah Michigan
  • Status: online
  • Ribbons : 53
Re:X58 Still! Need help with OC 2013/06/09 00:47:57 (permalink)
Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.
 
What is your CPU VTT at? If you have not touched that you will need to.

Case: Corsair 900D
Motherboard: EVGA Z170 Classified E179
CPU: Intel Core i7 6700K 4.6GHz
RAM: 16GB Corsair DDR4 2133 16-15-15-36
GPU: EVGA GTX 1070 FTW DT SLI
PSU: EVGA 1000w G2
SSD: Samsung 512GB 950 Pro NVME M.2
Monitor: Acer Predator X34 100Hz G-Sync
Sound: Schiit Modi 2 DAC~Schiit Vali 2 Amp
Headphones: AKG K7XX Massdrop Edition

#73
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 08:06:53 (permalink)
xboxnissan

So,

1: BaseClock to 191 => BSOD in booting windows
2: VCore v1.475 => v1.5 => Very Stable (20 minutes) and average of 70 for Core #1 and arround 66-68 for other cores
3: BaseClock to 196 => PC Frozed, reboots, what do I do?

I'll upload proper update.


With Bclk at 191, up your CPU Vcore 1 tick from what your last template shows.  Also up your VTT to +150mv and try again.  No need to change any other voltages at this time.  Temps are looking much better now...

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#74
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 08:10:42 (permalink)
loveha

Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.

What is your CPU VTT at? If you have not touched that you will need to.


Hey Loveha...is that vcore with or without Vdroop??  Man that's up there compared to my 950...

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#75
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 09:19:31 (permalink)
loveha

Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.

What is your CPU VTT at? If you have not touched that you will need to.

Hi,
 
I said "scared" as I have no idea of what could be the problem, I added more voltage to QPI PLL and VCore like before, but it didn't work. I'd rather ask :)
#76
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 09:23:15 (permalink)
bdary

xboxnissan

So,

1: BaseClock to 191 => BSOD in booting windows
2: VCore v1.475 => v1.5 => Very Stable (20 minutes) and average of 70 for Core #1 and arround 66-68 for other cores
3: BaseClock to 196 => PC Frozed, reboots, what do I do?

I'll upload proper update.


With Bclk at 191, up your CPU Vcore 1 tick from what your last template shows.  Also up your VTT to +150mv and try again.  No need to change any other voltages at this time.  Temps are looking much better now...

 
I'm trying that right away! Thanks!
#77
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 09:26:06 (permalink)
xboxnissan

loveha

Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.

What is your CPU VTT at? If you have not touched that you will need to.

Hi,

I said "scared" as I have no idea of what could be the problem, I added more voltage to QPI PLL and VCore like before, but it didn't work. I'd rather ask :)


Just set your QPI PLL to 1.2v and leave it there for now.  There may not be any reason to ever increase from that to reach your goal.

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#78
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 09:33:08 (permalink)
xboxnissan

bdary

xboxnissan

So,

1: BaseClock to 191 => BSOD in booting windows
2: VCore v1.475 => v1.5 => Very Stable (20 minutes) and average of 70 for Core #1 and arround 66-68 for other cores
3: BaseClock to 196 => PC Frozed, reboots, what do I do?

I'll upload proper update.


With Bclk at 191, up your CPU Vcore 1 tick from what your last template shows.  Also up your VTT to +150mv and try again.  No need to change any other voltages at this time.  Temps are looking much better now...


I'm trying that right away! Thanks!


Ok.  Let me know what happens.  Are your ram sticks 3 x 4gb or 6 x 2gb??

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#79
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 09:43:25 (permalink)
bdary
Ok.  Let me know what happens.  Are your ram sticks 3 x 4gb or 6 x 2gb?? 

 
I use 3x4GB GSkills Sniper DDR3 Memory
 
Update:
CPU Host Frequency (Mhz) ( 186 )   
TO
CPU Host Frequency (Mhz) ( 191 )   
+
CPU VTT Voltage ( +100mV ) 
TO
CPU VTT Voltage ( +150mV ) 
 
AND
 
CPU VCore ( 1.33750v ) 
UP TO 
CPU VCore ( 1.35000v ) 
 
I tried the VCore in between 1.33750 and 1.35 and it did not BSOD for 15 minutes (it did after 15 minutes), but the 1.35000v:
Made a BSOD I never heard of: attempted_execute_of_noexecute_memory (remember, I use Windows 8)..
 
Any ideas?
 
 
post edited by xboxnissan - 2013/06/09 09:53:25
#80
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 09:45:54 (permalink)
xboxnissan

bdary
Ok.  Let me know what happens.  Are your ram sticks 3 x 4gb or 6 x 2gb?? 


I use 3x4GB GSkills Sniper DDR3 Memory

Update:
CPU Host Frequency (Mhz) ( 186 )   
TO
CPU Host Frequency (Mhz) ( 191 )   
+
CPU VTT Voltage ( +100mV ) 
TO
CPU VTT Voltage ( +150mV ) 

AND

CPU VCore ( 1.33750v ) 
UP TO 
CPU VCore ( 1.35000v ) 

I tried the VCore in between 1.33750 and 1.35 and it did not BSOD for 15 minutes, but the 1.35000v:
Made a BSOD I never heard of: attempted_execute_of_noexecute_memory (remember, I use Windows 8)..

Any ideas?




Leave vcore at 1.35 for now, but update VTT to +200mv and test again.

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#81
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 09:56:49 (permalink)
bdary

xboxnissan

bdary
Ok.  Let me know what happens.  Are your ram sticks 3 x 4gb or 6 x 2gb?? 


I use 3x4GB GSkills Sniper DDR3 Memory

Update:
CPU Host Frequency (Mhz) ( 186 )   
TO
CPU Host Frequency (Mhz) ( 191 )   
+
CPU VTT Voltage ( +100mV ) 
TO
CPU VTT Voltage ( +150mV ) 

AND

CPU VCore ( 1.33750v ) 
UP TO 
CPU VCore ( 1.35000v ) 

I tried the VCore in between 1.33750 and 1.35 and it did not BSOD for 15 minutes, but the 1.35000v:
Made a BSOD I never heard of: attempted_execute_of_noexecute_memory (remember, I use Windows 8)..

Any ideas?




Leave vcore at 1.35 for now, but update VTT to +200mv and test again.

 
WHEA_UNCORRECTABLE_ERROR BSOD after 1 min of Prime95.. I've seen before we upped the QPI PLL but I'll take your guess!
#82
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 10:01:29 (permalink)
xboxnissan

bdary

xboxnissan

bdary
Ok.  Let me know what happens.  Are your ram sticks 3 x 4gb or 6 x 2gb?? 


I use 3x4GB GSkills Sniper DDR3 Memory

Update:
CPU Host Frequency (Mhz) ( 186 )   
TO
CPU Host Frequency (Mhz) ( 191 )   
+
CPU VTT Voltage ( +100mV ) 
TO
CPU VTT Voltage ( +150mV ) 

AND

CPU VCore ( 1.33750v ) 
UP TO 
CPU VCore ( 1.35000v ) 

I tried the VCore in between 1.33750 and 1.35 and it did not BSOD for 15 minutes, but the 1.35000v:
Made a BSOD I never heard of: attempted_execute_of_noexecute_memory (remember, I use Windows 8)..

Any ideas?




Leave vcore at 1.35 for now, but update VTT to +200mv and test again.


WHEA_UNCORRECTABLE_ERROR BSOD after 1 min of Prime95.. I've seen before we upped the QPI PLL but I'll take your guess!


So let's recap.  You had vcore at 1.35 and vtt at +150mv and you ran for 15 min until bsod.  Then we upped vtt to +200mv and you bsod'd after 1 min??  Where is your QPI PLL at now?? 

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#83
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 10:08:34 (permalink)
 Mother Board ( EVGA X58 3SLI SN : 312 )      
CPU ( i7 920) (DO)                        
CPU Cooler ( Corsair H100i (Push-Pull Configuration) )    
Memory ( GSkills Triple Channel 12 GB DDR3 (3x4GB) )    
PSU ( Thermaltake ToughPower 750W )    
GPU ( EVGA GTX570 )        
Operating System ( Windows 8 x64 )    

Frequency Control    
CPU Clock Ratio ( 20X )                                                                                             
CPU Host Frequency (Mhz) ( 191 )                                                                          
MCH Strap ( Auto )    
CPU Uncore Frequency (Mhz) ( 2981 mhz { 16X } )                                                    
CPU Clock Skew ( 0 ps )    
Spread Spectrum ( Disabled )    
PCIE Frequency (Mhz) ( 100 )   
    
Memory Feature            
Memory Speed ( Standard )    
Memory Control Setting ( Enabled )    
Memory Frequency ( 1067Mhz / 2:8 )                                                                    
Channel Interleave Setting ( 6 Way )    
Rank Interleave Setting ( 4 Way )    
Memory Low Gap ( Auto )    
tCL Setting ( 9 )    
tRCD Setting ( 9 )    
tRP Setting ( 9 )    
tRAS Setting ( 24 )    
tRFC Setting ( Auto )    
Command Rate ( Auto )    
tRL ( +0 )    

Voltage Control    
EVGA VDroop Control ( Without VDroop )    
CPU VCore ( 1.35000v )                                                                                                    
CPU VTT Voltage ( +200mV )    
CPU PLL VCore ( Auto )    
**IOH PLL VCore ( Auto )     
DIMM Voltage ( 1.5V )    
DIMM DQ Vref ( +0mV )    
QPI PLL VCore ( 1.20V )    
IOH VCore ( Auto )   
IOH/ICH I/O Voltage ( Auto )    
ICH VCore ( Auto )    
PWM Frequency ( 800 KHz )    

CPU Feature    
Intel SpeedStep ( Disabled )    
Turbo Mode Function ( Disabled )    
CxE Function ( Disabled )    
Execute Disable Bit ( Disabled )    
Virtualization Technology ( Enabled )    
Intel HT Technology ( Enabled )    
Active Processor Cores ( All )    
QPI Control Settings ( Enabled )    
QPI Link Fast Mode ( Enabled )    
QPI Frequency Selection ( 4.800 GT/s )    

PnP/PCI     PCI Express    
Maximum Payload Size ( 4096 )    
     
Power Management Setup    
ACPI Suspend Type ( S1(POS) )       
HPET Support ( Enabled )         
HPET Mode ( 64-bit )
 
It is currently like that (exacly).
Questions:
1- You had vcore at 1.35 and vtt at +150mv and you ran for 15 min until bsod. Yep.
2- Then we upped vtt to +200mv and you bsod'd after 1 min?? Yep.
3- Where is your QPI PLL at now??  1.2v (I brang back from latest stable OC)
#84
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 10:22:23 (permalink)
Hmmm, odd.  Ok, leave voltages where they're at except QPI PLL.  Give it a try at 1.3v and we'll see how that works.

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#85
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 11:12:30 (permalink)
Tried, BSOD (started Prime95 at 13:49, BSOD at ~14h08) :/
 
:) Thanks
post edited by xboxnissan - 2013/06/09 11:15:57
#86
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 11:16:04 (permalink)
xboxnissan

Tried, BSOD (started at 13:49, BSOD at ~14h08) :/

:) Thanks


Ok.  Up CPU vcore & QPI PLL each 1 tick.

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#87
loveha
Omnipotent Enthusiast
  • Total Posts : 9918
  • Reward points : 0
  • Joined: 2009/09/26 01:51:22
  • Location: Beulah Michigan
  • Status: online
  • Ribbons : 53
Re:X58 Still! Need help with OC 2013/06/09 11:18:49 (permalink)
bdary

loveha

Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.

What is your CPU VTT at? If you have not touched that you will need to.


Hey Loveha...is that vcore with or without Vdroop??  Man that's up there compared to my 950...

Without, it's a hog of a CPU. It's not Prime Stable anymore either. Has some degradation.

Case: Corsair 900D
Motherboard: EVGA Z170 Classified E179
CPU: Intel Core i7 6700K 4.6GHz
RAM: 16GB Corsair DDR4 2133 16-15-15-36
GPU: EVGA GTX 1070 FTW DT SLI
PSU: EVGA 1000w G2
SSD: Samsung 512GB 950 Pro NVME M.2
Monitor: Acer Predator X34 100Hz G-Sync
Sound: Schiit Modi 2 DAC~Schiit Vali 2 Amp
Headphones: AKG K7XX Massdrop Edition

#88
xboxnissan
Superclocked Member
  • Total Posts : 227
  • Reward points : 0
  • Joined: 2009/03/11 17:50:30
  • Status: offline
  • Ribbons : 0
Re:X58 Still! Need help with OC 2013/06/09 11:33:30 (permalink)
18 minutes of Prime95, weirdest BSOD. It showed 1/3 the BSOD screen and computer frozed ;/
 
:)
#89
bdary
CLASSIFIED ULTRA Member
  • Total Posts : 6776
  • Reward points : 0
  • Joined: 2008/04/25 14:08:16
  • Location: Florida, USA
  • Status: offline
  • Ribbons : 55
Re:X58 Still! Need help with OC 2013/06/09 11:47:00 (permalink)
loveha

bdary

loveha

Once your scared to move on, then your done overclocking. You revert back to your last stable clock, because in order to get stable you need to add more voltage than that. I personally run 1.4375v on my i7 930 for 4.2GHz with CPU VTT +200.

What is your CPU VTT at? If you have not touched that you will need to.


Hey Loveha...is that vcore with or without Vdroop??  Man that's up there compared to my 950...

Without, it's a hog of a CPU. It's not Prime Stable anymore either. Has some degradation.


Wow, I guess so.  We need that X79 Dark to finally get released...

EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

Firestrike >> http://www.3dmark.com/fs/9823006
TimeSpy >> http://www.3dmark.com/spy/297131
EVGA Affiliate Code - M1D1QH1FTU
#90
Page: < 12345.. > >> Showing page 3 of 8
Jump to:
  • Back to Mobile