bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/12 13:44:59
(permalink)
xboxnissan
BSOD on boot, Windows 8 says "The BIOS isn't compatible with ACPI, Error Code 0xc0000225" for some reasons... Any ideas ? I tried switching to S3 for ACPI but I still have the same issue.
EDIT: Sorry it seems I disabled it for no reasons. :)
I'm not getting something here. How were you able to boot before?? Nothing we changed should affect booting. Is your Win8 OS 64bit or 32bit??
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/12 13:54:37
(permalink)
64 bit, I just disabled the ACPI by mistake I think. Now I get a BSOD and I don't have any chance of looking at the code, it's getting away so fast. I'm currently trying to film it lol. EDIT: No error code is given.. FYI https://www.dropbox.com/s...0130612_163353_001.3gp
post edited by xboxnissan - 2013/06/12 14:05:20
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/12 14:10:01
(permalink)
xboxnissan
64 bit, I just disabled the ACPI by mistake I think. Now I get a BSOD and I don't have any chance of looking at the code, it's getting away so fast. I'm currently trying to film it lol.
EDIT: No error code is given..
Ok. I had you change only 5 things and the ram timings should be no issue so that leaves 4 items. Starting with the last item, "HPET mode", change it back to 32bit and then reboot. If you still bsod, go back in bios, change it back to 64bit, but this time change the "payload size" back to 128 and re-boot. IF bsod, change it back to 4096 and go up the 3rd item, "turbo mode". Enable it, re-boot. If bsod, go back and disable it. Then enable vdroop, re-boot. What we're doing here is going back 1 by 1 to see which is causing this bsod issue.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/12 14:17:27
(permalink)
That was it, the 64 bit mode! I boot successfully. Strange...
EDIT: Talk too fast, let me go over the other possibilities.
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/12 15:00:53
(permalink)
xboxnissan
That was it, the 64 bit mode! I boot successfully. Strange...
EDIT: Talk too fast, let me go over the other possibilities.
Are you still going through those 4 settings?
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/12 15:04:15
(permalink)
Actually, was my fault haha. I put ACHI because I thought it was causing it (in the past, I've installed ACHI mode for Windows 8). So my entire fault. Sorry. On better news, See attachement (currently 18h06 here) And the temps are arround 65-71, so it's good for now (Maximum Setting)
post edited by xboxnissan - 2013/06/12 15:06:18
Attached Image(s)
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/12 15:14:45
(permalink)
xboxnissan
Actually, was my fault haha. I put ACHI because I thought it was causing it (in the past, I've installed ACHI mode for Windows 8).
So my entire fault. Sorry.
On better news,
See attachement (currently 18h06 here)
And the temps are arround 65-71, so it's good for now (Maximum Setting)
Lol. Ok. If you pass the test with no errors, then up the Bclk to 186 and run the same test again. 5 runs at maximum. Make sure you keep all other settings the same until you bsod or get stress testing errors. If you pass 186, go up to 191 bclk.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
Re:X58 Still! Need help with OC
2013/06/12 17:39:32
(permalink)
Well now that we sorted that out do as bdary says.
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/12 19:39:37
(permalink)
There you go :) Worked! Sorry for the delay..
post edited by xboxnissan - 2013/06/12 19:43:30
Attached Image(s)
|
Re:X58 Still! Need help with OC
2013/06/13 03:12:28
(permalink)
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/13 06:36:02
(permalink)
xboxnissan
There you go :) Worked! Sorry for the delay..
Great. Let me know when you pass the next one... 
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/13 18:50:35
(permalink)
186 Passed :) Time to go into 191 settings.!
Attached Image(s)
|
Re:X58 Still! Need help with OC
2013/06/13 18:59:41
(permalink)
Just wanna say that I am at 190bclk with 1.35000 vcore and a 1.25 vtt
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/13 21:04:31
(permalink)
191 Stable :D Next one is upcoming!
Attached Image(s)
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/13 21:13:10
(permalink)
Was all happy, Windows 8 boots with 196 and all that, start IntelBurner, 30 seconds later (with ~65 of temps), BSOD.. :)
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 06:31:26
(permalink)
xboxnissan
191 Stable :D Next one is upcoming!
That's great bud. And what's your multi here? It's showing your clock speed at 4.2ghz on your pic?? EDIT: I have to know this before we move on to adjust for your 196 bclk. If you're not using a multi of 20 like I asked, then things are a bit different. A 191 bclk x a 20 multi should net you a 3.8ghz OC. Not a 4.2 OC.
post edited by bdary - 2013/06/14 07:04:58
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 09:02:18
(permalink)
Mother Board ( EVGA X58 3SLI SN : 312 )
CPU ( i7 920) (DO)
CPU Cooler ( Corsair H100i (Push-Pull Configuration) )
Memory ( GSkills Triple Channel 12 GB DDR3 )
PSU ( Thermaltake ToughPower 750W )
GPU ( EVGA GTX570 )
Operating System ( Windows 8 x64 )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 191 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067Mhz / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( Auto )
Command Rate ( Auto )
tRL ( +0 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.37500v )
CPU VTT Voltage ( +200mV )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.5V )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.350V )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency ( 800 KHz )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ([ACPI Function ( Enabled )
Is the stable OC @ 191 :p
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 09:13:51
(permalink)
That all looks good in your template. I wonder why IBT shows 4.2ghz. Hmmm. What does CPU-Z or EVGA E-leet show for your CPU clock speed?? Anyway, for your 196 bclk, up your vcore 2 ticks. Should be 1.3875v and try the test again. All we need to do is get to 201 bclk with a 20 multi and you'll have your 4.0ghz OC and ram at 1600mhz... As always, keep an eye on your core temps.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
shadowiix
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2008/03/21 21:05:31
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 10:01:09
(permalink)
Since you proc 920 only supports speeds up 1066, you need to take care on your on your ram speeds, you may want to increase your voltage to your ram, try stock 1.5 you should not go past 1.65v.
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 10:06:53
(permalink)
shadowiix
Since you proc 920 only supports speeds up 1066, you need to take care on your on your ram speeds, you may want to increase your voltage to your ram, try stock 1.5 you should not go past 1.65v.
If you look at his bios template, you'll see his Dimm voltage is at 1.5v which is his ram's voltage spec. Also, that 1066 ram speed you mentioned is Intel's "official" supported speed. However, his ram is rated at 1600mhz, so he is setup correctly here.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
shadowiix
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2008/03/21 21:05:31
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 10:50:21
(permalink)
although his ram is rated at 1600, this would be officially considered an overclock for his cpu regardless. It is something to look at when overclocking.
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 10:58:10
(permalink)
shadowiix
although his ram is rated at 1600, this would be officially considered an overclock for his cpu regardless. It is something to look at when overclocking.
Yes, that's true it is considered Oc'ing the ram. But I don't understand your point here? Since the ram is rated at 1600 MHz at 1.5v with timing specs at 9,9,9,24, then I don't really see what you're saying here. Now if he began exceeding the 1600mhz spec, then he may at some point need to begin increasing the Dimm voltage and/or relaxing the timings some.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
shadowiix
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2008/03/21 21:05:31
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 11:02:44
(permalink)
It looks like his current ratio is right, however if the overclock pushes the ram higher than 1600, it may cause some stability issues with this proc. As long as it is fine at 1600 and doesn't go higher like 1886 or 2000, he shouldn't have a problem running at 1600. To me some people seem to overlook how fast there ram is running at once they start to overclock fsb.
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 11:13:49
(permalink)
shadowiix
It looks like his current ratio is right, however if the overclock pushes the ram higher than 1600, it may cause some stability issues with this proc. As long as it is fine at 1600 and doesn't go higher like 1886 or 2000, he shouldn't have a problem running at 1600. To me some people seem to overlook how fast there ram is running at once they start to overclock fsb.
Apparently you didn't bother to read his thread or even the past several posts. His goal is a 201 Bclk with a 20 multi which will land his ram speed at exactly 1600mhz.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 14:26:02
(permalink)
bdary
That all looks good in your template. I wonder why IBT shows 4.2ghz. Hmmm. What does CPU-Z or EVGA E-leet show for your CPU clock speed??
Anyway, for your 196 bclk, up your vcore 2 ticks. Should be 1.3875v and try the test again. All we need to do is get to 201 bclk with a 20 multi and you'll have your 4.0ghz OC and ram at 1600mhz... As always, keep an eye on your core temps.
This is E-Leet with 191 of multi. I'm trying right away 196! thanks!
Attached Image(s)
|
xboxnissan
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2009/03/11 17:50:30
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 14:30:38
(permalink)
BSOD : Clock_Watchdog_Timeout on Windows 8..
:) thanks
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 14:54:16
(permalink)
xboxnissan
BSOD : Clock_Watchdog_Timeout on Windows 8..
:) thanks
Try this instead. Put your Bclk to 193 instead and leave your vcore at 1.3875v. Let's see if it'll pass there.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
myfishbear
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2013/04/04 00:01:51
- Status: offline
- Ribbons : 0
Re:X58 Still! Need help with OC
2013/06/14 15:13:54
(permalink)
try this the base clock really affects stability and heat... this is what i use 24/7 Mother Board ( EVGA X58 SLI3 ) CPU ( i7 960) CPU Cooler ( Corsair H80i (Push-Pull Configuration) ) Memory ( Corsair Vengeance 12GB (3x4GB) DDR3 1600MHz (CMZ12GX3M3A1600C9)) GPU ( EVGA GTX770 ) Operating System ( Windows 7 x64 ) Frequency Control CPU Clock Ratio ( 24X ) you can try 20x if you cant get 24x mult CPU Host Frequency (Mhz) ( 170 ) you can try 210 212 or 213 if you cant get 24x mult MCH Strap ( Auto ) CPU Uncore Frequency (Mhz) ( Auto ) CPU Clock Skew ( 0 ps ) Spread Spectrum ( Disabled ) PCIE Frequency (Mhz) ( 100 ) Memory Feature Memory Speed ( Standard ) Memory Control Setting ( Enabled ) Memory Frequency ( 1333Mhz / 2:10 ) Channel Interleave Setting ( 6 Way ) Rank Interleave Setting ( 4 Way ) Memory Low Gap ( Auto ) tCL Setting ( 9 ) tRCD Setting ( 9 ) tRP Setting ( 9 ) tRAS Setting ( 24 ) tRFC Setting ( Auto ) Command Rate ( Auto ) tRL ( +0 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.30625v )
CPU VTT Voltage ( +2250mV )
CPU PLL VCore ( Auto )
QPI PLL VCore ( 1.400v )
)
DIMM Voltage ( 1.55V )
DIMM DQ Vref ( +0mV )
IOH VCore ( 1.400v ) IOH/ICH I/O Voltage ( 1.650v )
ICH VCore ( 1.250v )
CPU Feature
Intel SpeedStep ( Enabled )
Turbo Mode Function ( Enabled ) CxE Function ([ACPI Function ( Enabled ) = 4258mhz cpu 1703mhz ram (was rated for 1600) 36-31c rest temp
post edited by myfishbear - 2013/06/14 15:20:12
|
bdary
CLASSIFIED ULTRA Member
- Total Posts : 6776
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida, USA
- Status: offline
- Ribbons : 55
Re:X58 Still! Need help with OC
2013/06/14 15:22:41
(permalink)
xboxnissan
BSOD : Clock_Watchdog_Timeout on Windows 8..
:) thanks
If 193 don't pass, up vcore 1 more tick. If it does, raise bclk to 197 and up vcore 1 more tick. If 197 don't pass, up vcore 1 more tick. Post back your results and I'll look at them tomorrow. GL bud... Watch your temps.
EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysXi7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHzSamsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GBEVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D
Firestrike >> http://www.3dmark.com/fs/9823006 TimeSpy >> http://www.3dmark.com/spy/297131EVGA Affiliate Code - M1D1QH1FTU
|
Re:X58 Still! Need help with OC
2013/06/14 18:10:59
(permalink)
bdary it shows 4.2 because in turbo mode it will give him a 21x multi
|
