loveha
Me and my 930 hate you. Nice chip.

 
Thanks

loveha

jethc9

loveha
Me and my 930 hate you. Nice chip.

Thanks

Just checked, not only did you knock me down to 5th but you took 1st for Bloomfields.

LOL..Sorry about that. Yeah I had 4.5 easy, but was going for the top spot. I spent hours trying to stabilize it. It's not easy to pass LinX at a BLCK of 218
 
Edit: Although it could be attributed to the fact that I'm using an SLI3 board. Maybe if I still had my classy I could have gotten it easier.

Thanks Kram

Can I update my score?
New score:
v1ral
Core i7 920 D0, Batch #: 3849B203
CPU clocked at: 4.21 Ghz
Voltage: 1.25625
Idle temps: 47, 44, 45, 43
Load temp: 77, 76, 74, 73
GFlop peak: 53.9941

Hey kram, now that I won that cooler, its time to see if it will put me in the club! 

Can I update my score?
Again?
New score:
v1ral
Core i7 920 D0, Batch #: 3849B203
CPU clocked at: 4.315 Ghz
Voltage: 1.3
Idle temps: 50, 47, 47, 46
Load temp: 84, 82, 79, 78
GFlop peak: 55.6573

 
How many times can I do this?
 

v1ral, your stability submission has been updated, nice job.
 
rbh5081, you are missing the notepad with your member info and date. Also when listing your stability submission, please list out temps for each core.

steel700, welcome to the club.

EVGA Forum name: irony
Core i7 990X
CPU Clocked at: 4.411 mhz
Voltage: 1.36875
Load Temps: 82 76 75 73 77 74
Min Temps:    42 40 41 40 39 34
74.1924 Gflops peak 
 

Uploaded with ImageShack.us
 
 
Amadeux72  
Core i7 950 Batch # 3007C437
CPU clocked at: 4.37Ghz
Voltage: 1.425
Idle temps: 49, 47, 50, 45
Load temps: 80, 77, 78, 73
GFlop peak: 64.4320
http://imageshack.us/f/684/benchfj.png/

Can I update my score?
Again?
New score:
v1ral
Core i7 920 D0, Batch #: 3849B203
CPU clocked at: 4.420 Ghz
Voltage: 1.3875
Idle temps: 36, 34, 33, 32
Load temp: 76, 75, 71, 69
GFlop peak: 55.5692

hweed. how can we get higher gflops?does gflops even pertain to any significance in performance, it seems ive reafhed 56.x gflop fap and.that was with my 4.35 trial overclock.anyways what should i keep for a 24/7 overclock?

I don't know if I would agree with Kitfit. The Gflops are backcalculated from by LinX from the time it took for the LinX loop to complete. They are a relevant benchmark of how fast your CPU runs. What I have observed is that the Gflop is affected by the programs you run in the background. Running Windows in diagnostic mode for example will get you slightly higher Gflops because other programs (mostly the antivirus actually) is not taking any CPU time. The Bloomfield seem to have very consistent Gflop scaling overall unlike the gulftown. This is because many downclock the uncore which consist of the IMC and the L3 cache on the CPU. So in reality the high core clock is somewhat dragged down by the slower memory and and cache.
A CPU at 4.6GHz core with 3GHz uncore will actually be slower than a 4.4GHz core with 4GHz uncore for example. The core clock speed is not everything. It is the most important but not the only thing that matters. Of course the uncore clock is set using a multiple of the CPU clock too: 2X minimum for the Bloomfield and 1.5X minimum for the Gulftown so how fast your memory is might affect the result too.

Of course they are a benchmark of "benchmark of how fast your CPU runs". But you know as well as i know that it is prefectly cheatable to UP a Gfop count in any Linx run. It's not rocket science, and can be done at an even lower clockspeed than my top score run. I say that because i've done it myself.

Here's my I7 990X, room temp was around 19c.
System Info
EVGA 4-way SLI Motherboard
EVGA GTX 580 3-way SLI H2O version
12 Gigs Mushkin ram
Mo-ra03 External radiator cooling

Core i7 990X  Batch # 3045a714
CPU clocked at: 4.75GHz  
Voltage: 1.470 (Without Vdroop)   
Idle temps: 27, 15, 10, 11, 16, 19
Load temp: 72, 68, 68, 58, 66, 67 GFlop peak: 92.5003
 
 

Uploaded with ImageShack.us