Watercooling 2nd time round - Does this look right?

Author
Post
Essentials Only Full Version
dmoheban
FTW Member
  • Total Posts : 1247
  • Reward points : 0
  • Joined: 2003/07/08 15:35:10
  • Status: offline
  • Ribbons : 1
2016/11/13 11:54:06 (permalink)

 
If any of you guys have experience watercooling and running loops I sure could use some advice.
The parts are pretty much as labeled except I have an extra EK Revo D5 pump in my possession.
Not sure if the order of tube to rad to block look right. I would have preferred to have one rad
in middle of cpu and gpus but that would create more tube length and insanity. What do you
guys think?
 
Thanks
 

 

EVGA CLASSIFIED 759  - Intel 920 D0 CPU
Corsair Dominators 3x2gb C7 1600mhz
XFX 6970 Trifire - XFi Titanium
Heatkiller 3.0 - XPSC RX360 Rad - MCP655



#1

13 Replies Related Threads
    owcraftsman
    CLASSIFIED Member
    • Total Posts : 4417
    • Reward points : 0
    • Joined: 2005/04/16 16:41:02
    • Location: Cape Coral, Florida
    • Status: offline
    • Ribbons : 57
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 12:22:39 (permalink)
    I like this better not sure what you were doing with the bottom rad in your layout but loose the xflow up top make all rad push except bottom monsta go push/pull.
    Off to watch football now but I'll be back because I have quit a few question not least of which is case.


    Phanteks Eclipse P400: | MSI Z170A G7 | 6700k 4.7x 1.345v H110iGTX | G.Skill F4-3000C15D-16GVR |2x EVGA 980 TI SC ACX in SLI | Samsung 950 Pro M.2 OS | WD2003FZEX Data | Corsair RM750i
     
    Phanteks Enthoo Luxe: MSI Z87-G45 Gaming v1.9 bios | 4770k 43x1.24v XSPC Raystorm | G.Skill TridentX2133C9 2x8-16GB | MSI R9-290x Kyrographics Hawaii w/Active Backplate | 2x 250gb 840 EVO Raid-0 OS | WD20003FZEX (data) | Corsair HX850
     
    Phanteks Enthoo Primo: | MSI Z97 Gaming 7 | 4790k 48x 1.254v EK-EVO | G.Skill TridentX2400C9 2x8-16GB | 2x Sapphire R9-290x ref (hynix) CF EK block Backplate & serial bridge | 2x 840 Pro Raid-0 OS | WD20003FZEX (data) | EVGA SuperNova 1000 G2
    #2
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 12:29:07 (permalink)
    Or
     
    post edited by bcavnaugh - 2016/11/13 12:31:11

    Attached Image(s)


    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #3
    dmoheban
    FTW Member
    • Total Posts : 1247
    • Reward points : 0
    • Joined: 2003/07/08 15:35:10
    • Status: offline
    • Ribbons : 1
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:15:49 (permalink)
    Thanks for the corrections. Looking up restriction data info and it seems that the AlphaCool and SR-2 are both 0.13 and the 360 GTS XFlow is 0.91 and the Heatkiller is at 0.85. Not sure what the restriction values are for the EK Classy KPE blocks. Anyone know?
     
    Also not sure if I can run a terminal bridge off of the Classy KPE 980ti Blocks? The EK specifications and warnings are confusing.
     
    Thanks

     

    EVGA CLASSIFIED 759  - Intel 920 D0 CPU
    Corsair Dominators 3x2gb C7 1600mhz
    XFX 6970 Trifire - XFi Titanium
    Heatkiller 3.0 - XPSC RX360 Rad - MCP655



    #4
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:17:41 (permalink)
    Not really a Correction, they say you can go anyway.
    I like to have a Rad to help cool down the Coolant before it goes back into the Pump/Reservoir is all.
    What are you going to use for a Pump Controller?
     $169.99 CTR-CD1224 12V or 24V Pump & Fan Controller With Display   SKU: CTR-CD1224
    +2   $9.99 Coolant Temperature Sensor Plug, 10K Ohm   SKU: SEN-AP008G
    + 1  $19.99   INS-FM17N Coolant Flow Meter   SKU: INS-FM17N
    OR
     
    $29.99 INS-FM18 Coolant Flow Meter, Stainless Steel   SKU: INS-FM18
     
     
     
    Temperature Sensor, Flat, 10K Ohm   SKU: SEN-AP007P Comes with the CTR-CD1224 and you can set the Temps to shut down your computer at a given temperature.
    I have mine on the Bottom Site of my  New Water Block $89.99  CPU-390CI Water Block, Copper Top (Intel Processor)
    Then one  Coolant Temperature Sensor Plug Going into the First Water Block then one coming out the Last Water Block.
    post edited by bcavnaugh - 2016/11/13 13:42:23

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #5
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:26:25 (permalink)
    Also I like the coolant coming from Rad to the Water Block then from the Pump as the Pump can heat the Coolant.
     
    If the Classy KPE 980ti Blocks are from EVGA (Hydro Copper) even if made by EK you Cannot use the EK SLI Water Block Bridge.
    post edited by bcavnaugh - 2016/11/13 13:36:02

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #6
    dmoheban
    FTW Member
    • Total Posts : 1247
    • Reward points : 0
    • Joined: 2003/07/08 15:35:10
    • Status: offline
    • Ribbons : 1
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:37:54 (permalink)
    My blocks are made by EK not EVGA. 
     
    Thanks for the suggestions.
     

     

    EVGA CLASSIFIED 759  - Intel 920 D0 CPU
    Corsair Dominators 3x2gb C7 1600mhz
    XFX 6970 Trifire - XFi Titanium
    Heatkiller 3.0 - XPSC RX360 Rad - MCP655



    #7
    dmoheban
    FTW Member
    • Total Posts : 1247
    • Reward points : 0
    • Joined: 2003/07/08 15:35:10
    • Status: offline
    • Ribbons : 1
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:40:21 (permalink)
    bcavnaugh
    Not really a Correction, they say you can go anyway.
    I like to have a Rad to help cool down the Coolant before it goes back into the Pump/Reservoir is all.
    What are you going to use for a Pump Controller?
     $169.99 CTR-CD1224 12V or 24V Pump & Fan Controller With Display   SKU: CTR-CD1224
    +2   $9.99 Coolant Temperature Sensor Plug, 10K Ohm   SKU: SEN-AP008G
    + 1  $19.99   INS-FM17N Coolant Flow Meter   SKU: INS-FM17N
    OR

    $29.99 INS-FM18 Coolant Flow Meter, Stainless Steel   SKU: INS-FM18
     
     
     
    Temperature Sensor, Flat, 10K Ohm   SKU: SEN-AP007P Comes with the CTR-CD1224 and you can set the Temps to shut down your computer at a given temperature. I have mine on the Bottom Site of my  New Water Block $89.99  CPU-390CI Water Block, Copper Top (Intel Processor)




     
    Was going to use this:
    http://koolance.com/pump-or-fan-speed-controller-ctr-spd1224m
     

     

    EVGA CLASSIFIED 759  - Intel 920 D0 CPU
    Corsair Dominators 3x2gb C7 1600mhz
    XFX 6970 Trifire - XFi Titanium
    Heatkiller 3.0 - XPSC RX360 Rad - MCP655



    #8
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:42:54 (permalink)
    dmoheban
    bcavnaugh
    Not really a Correction, they say you can go anyway.
    I like to have a Rad to help cool down the Coolant before it goes back into the Pump/Reservoir is all.
    What are you going to use for a Pump Controller?




     
    Was going to use this:
    http://koolance.com/pump-or-fan-speed-controller-ctr-spd1224m
     

     $49.99 CTR-SPD1224M 12V or 24V Pump/Fan Controller   SKU: CTR-SPD1224M
    Then you would not need a Flow Meter and so on.
     
    I would spend another $20 for this
    On Sale Now $64.95 CTR-SPD12X2 Dual 12V Pump Controller   SKU: CTR-SPD12X2
    I do use all the above in my Rigs.
    post edited by bcavnaugh - 2016/11/13 13:45:57

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #9
    dmoheban
    FTW Member
    • Total Posts : 1247
    • Reward points : 0
    • Joined: 2003/07/08 15:35:10
    • Status: offline
    • Ribbons : 1
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 13:50:17 (permalink)
    bcavnaugh
    dmoheban
    bcavnaugh
    Not really a Correction, they say you can go anyway.
    I like to have a Rad to help cool down the Coolant before it goes back into the Pump/Reservoir is all.
    What are you going to use for a Pump Controller?




     
    Was going to use this:
    http://koolance.com/pump-or-fan-speed-controller-ctr-spd1224m
     

     $49.99 CTR-SPD1224M 12V or 24V Pump/Fan Controller   SKU: CTR-SPD1224M
    Then you would not need a Flow Meter and so on.
     
    I would spend another $20 for this
    On Sale Now $64.95 CTR-SPD12X2 Dual 12V Pump Controller   SKU: CTR-SPD12X2
    I do use all the above in my Rigs.




     
    Why would I not need a flow meter? And aren't having both together redundant?
     
    Thanks

     

    EVGA CLASSIFIED 759  - Intel 920 D0 CPU
    Corsair Dominators 3x2gb C7 1600mhz
    XFX 6970 Trifire - XFi Titanium
    Heatkiller 3.0 - XPSC RX360 Rad - MCP655



    #10
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 14:07:00 (permalink)
    dmoheban
    bcavnaugh
    dmoheban
    bcavnaugh
    Not really a Correction, they say you can go anyway.
    I like to have a Rad to help cool down the Coolant before it goes back into the Pump/Reservoir is all.
    What are you going to use for a Pump Controller?




     
    Was going to use this:
    http://koolance.com/pump-or-fan-speed-controller-ctr-spd1224m
     

     $49.99 CTR-SPD1224M 12V or 24V Pump/Fan Controller   SKU: CTR-SPD1224M
    Then you would not need a Flow Meter and so on.
     
    I would spend another $20 for this
    On Sale Now $64.95 CTR-SPD12X2 Dual 12V Pump Controller   SKU: CTR-SPD12X2
    I do use all the above in my Rigs.




     
    Why would I not need a flow meter? And aren't having both together redundant?
     
    Thanks


    One or the Other  CTR-SPD12X2 or the  CTR-SPD1224M not Both.
     
    The Flow Meter and other items above work only on the CTR-CD1224 is what I mean.
    With this Pump that is $76.99 PMP-500 Pump, G 1/4 BSP
     
    post edited by bcavnaugh - 2016/11/13 14:10:35

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #11
    dmoheban
    FTW Member
    • Total Posts : 1247
    • Reward points : 0
    • Joined: 2003/07/08 15:35:10
    • Status: offline
    • Ribbons : 1
    Re: Watercooling 2nd time round - Does this look right? 2016/11/13 14:34:34 (permalink)
    Well I love the digital display controller but not sure I could use it on my case where my rad I've placed in the front of the case blocks its usage plus I took out the 5.25 bay.

    Thanks

     

    EVGA CLASSIFIED 759  - Intel 920 D0 CPU
    Corsair Dominators 3x2gb C7 1600mhz
    XFX 6970 Trifire - XFi Titanium
    Heatkiller 3.0 - XPSC RX360 Rad - MCP655



    #12
    Doubles
    FTW Member
    • Total Posts : 1750
    • Reward points : 0
    • Joined: 2008/12/26 02:51:04
    • Location: At the bar hitting on Bargoyles
    • Status: offline
    • Ribbons : 2
    Re: Watercooling 2nd time round - Does this look right? 2016/11/15 06:23:13 (permalink)
    bcavnaugh
    Also I like the coolant coming from Rad to the Water Block then from the Pump as the Pump can heat the Coolant.
     



    I was under the impression that temps stabilize throughout the loop anyways.
     
    "When you boot up a powered off, water-cooled PC, the water and your CPU are at room temperature. When you boot the PC up, the chip gets hot very fast. The water moves over the chip, it begins to remove heat, the heat goes to the radiator, and some of the heat is removed. Not all of it can be removed. You have to know a lot of thermodynamics theory deeply (more than me) to know exactly why. The water begins to warm up slowly, and in time it reaches a balance: an equilibrium. Heat is made and heat removed, the loop is stabilized and temperatures will not change."

    PC: i7 5930K// MSI Gaming 7//4x4 HyperX Predator 3000// MSI GTX 980ti// EVGA Supernova G2 1000w// Samsung 950 PRO m.2// Thermaltake Core P5 case// Dell S2716DG
    WC Setup:  XSPC Raystorm red// Blackice Nemesis 480 red rad// Monsoon hardline blood red// XSPC photon 270 res red// Uber D5 pump red
    #13
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15092
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: offline
    • Ribbons : 68
    Re: Watercooling 2nd time round - Does this look right? 2016/11/15 17:26:53 (permalink)
    Doubles
    All I can say is my Water temperature sensors tell me what the water Temps are going in and going out before a block and after a block.
    As I said above "they say you can go anyway" in Post #5 above.
    I have my way as other have their ways.
     

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #14
    Jump to:
  • Back to Mobile