Darkboomhoney
German Support said they are working for an gtx 1080 Classified hydro Block i hope the Informations are correct
Do you have a Link to this?
|
I hope this is true. Like I mentioned previously, it would make sense giving the abrupt course change for EK. Why create a product that EVGA themselves are going to release likely made by EK.
Lets hope that it comes out sometime soon. Would love to not waste time trying a 980ti classified block.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
Darkboomhoney
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/10/05 05:54:22
- Status: offline
- Ribbons : 0
i have no link sorry, yesterday i called the europe Support and they said the Block is in production.... I hope he dont lie.... Can everybody call the USA Support and ask them? But current no Release date...
post edited by Darkboomhoney - 2016/09/06 23:54:44
|
Bingokongen
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2014/09/28 14:05:44
- Status: offline
- Ribbons : 0
StealthArsenal
Just need to measure the blocks to make sure they line up properly and cover all the vrms and such beneath. Do all classy's have the same general size as the 1080 classified. Width and length?
Edit: I just compared the PCB's of the 980TI Classified to the 1080 Classified. Unless the measurements work out way different (length and width of the block), the mounting is identical on the two cards for the waterblock. The 980 on the other hand does not line up to the PCB mounting that is on the 1080. You can compare the two PCB photos on EK's website and put the 980TI Classy next to the 1080 Classy and see what I am talking about.
Pure dimensions from EVGA's website would seem to indicate the same PCB for the two cards with different GPU: Both are 11in or 279.4mm in length. The height while the same at 5.94in/150.88mm is insignificant since the coolers would come off.
True. They are pretty much identical. The ek780 wb was also confirmed to fit the 980 and 980ti. My only concern was gpu height, after a paste-droplet test on the mem and gpu, the gpu seemed somewhat lower on the board. Which is why i opted for the 0.5mm pads on the mem.
|
BytalesXT
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2013/12/15 06:04:03
- Status: offline
- Ribbons : 0
Darkboomhoney
i have no link sorry, yesterday i called the europe Support and they said the Block is in production.... I hope he dont lie.... Can everybody call the USA Support and ask them? But current no Release date...
A block in production for the 1080 Classified ? Or am I misunderstanding ? Which Firma is making this Block ?
|
Darkboomhoney
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/10/05 05:54:22
- Status: offline
- Ribbons : 0
i dont know witch Firma is making this Block... the Support said a block for the classified is planned and in production that was all he said. But he has no information when it will appear. can therefore call someone the USA Support and ask whether the information is correct because my English is not the best.....
post edited by Darkboomhoney - 2016/09/07 07:34:49
|
ridesy
ACX Member
- Total Posts : 380
- Reward points : 0
- Joined: 2007/03/16 13:44:25
- Status: offline
- Ribbons : 0
Darkboomhoney
i have no link sorry, yesterday i called the europe Support and they said the Block is in production.... I hope he dont lie.... Can everybody call the USA Support and ask them? But current no Release date...
Dark, I have already posted content of email reply from EU EVGA customer/technical support in which they said they have NO information yet on any block for 1080 Classified. as below - this is email they sent me: thank you for contacting the EVGA Customer Service Team. My name is James Lac and I will answer your question today.
Your Answer:Hello, Unfortunately we do not have any current information on possible waterblocks for the classified models at this time. I do apologize for any inconveniences this may have caused you. Regards, EVGA
X79 Dark (2.09), 4820K @4.5Ghz, 1.225 vCore, 4 x 8Gb Corsair Vengeance Pro 2133Mhz, 2 x GTX780 Classified Hydrocopper & HK3.0 CPU Watercool. DD5 Pump in XSPC bay Resevior.
|
One would think that if EVGA was going to release a block they should just come out and say it. All of this mystery and inconsistent answers is just super confusing. Very similar to the 10 series launch in general with regards to availability and such.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
BytalesXT
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2013/12/15 06:04:03
- Status: offline
- Ribbons : 0
A, so that was EVGA Support you mailed !
Question, can i return the 1080 Classified if i have allready registered the Card on EVGA Website, and claimed the 1000 Points for Paragon ?
Im am realy realy considering returning the classified and Change it to a FTW Card. Because EKWB has a waterblock for the later. But then i dont know if the EVGA Powerplug will fit the FTW, and i really really Need the power Plug.
Apart from that i really really want to Keep the classified, because ist the better built of the two, but if I can't watercool it, then it's useless to me.
|
CoercionShaman
FTW Member
- Total Posts : 1794
- Reward points : 0
- Joined: 2015/04/21 17:20:44
- Status: offline
- Ribbons : 3
Jacob has said there will be multi configurations for the power plug already.
What use is knowledge if there is no understanding?~Stobaeus Intel i5 4670K @ 4.2GHz, Corsiar H100i v2 AIO, 32GB G-Skill Trident X @ 2133 MHz, MSI 1080 Gaming X w/ 2139 MHz boost, ASUS Maximus VI Hero, Samsung 840 EVO 240GB, WD 750GB, CM V1000, Dell U3415W 21:9 @ 75Hz, Windows 10 Pro AE, CM Storm Trooper
|
Bingokongen
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2014/09/28 14:05:44
- Status: offline
- Ribbons : 0
BytalesXT
Apart from that i really really want to Keep the classified, because ist the better built of the two, but if I can't watercool it, then it's useless to me.
I think there's still 780 blocks available at ekwb.
|
Is that 780 block full length or shorter. Looks like it is shorter than the 980ti classified block. Pictures are deceiving though.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
Bingokongen
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2014/09/28 14:05:44
- Status: offline
- Ribbons : 0
StealthArsenal
Is that 780 block full length or shorter. Looks like it is shorter than the 980ti classified block. Pictures are deceiving though.
It's this one: ekwb.com/wp-content/uploads/images/FC780-GTX-Classy_1200.jpg Basically, it covers what needs to be covered and does a good job at it, ref:my post back at page 5
|
I may try out the 980ti variant. I dont want to see any of the pcb at all.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
EK_Luc
scgt1
EK-Luc Can you get the measurements from the pci plate to the center of the terminals? I need to know how far the terminals are off from the EK-FC R9-290X - Acetal+Nickel (Rev.2.0) So I know if I need to completely get different fittings to go from the GPU to my Kryo m.2 waterblock. The following link is the area I'm talking about. It appears from images there is a pretty good difference between the distance of g 1/4 ports on the two blocks. http://imgur.com/oYClaaj Or at least the measurement from the edge of the block (i/o plate side) to the middle of each terminal. I can only assume the block fits to the edge of the pcb since there are no installed photos. That measurement will be close enough for what I need.
Sorry I was out for the weekend.
Since I don't have any of those blocks in hands, I can't measure them. Sorry again.
This forum again not notifying me of reply's lol. You don't have a 1080 FTW block to measure?
Heatware scgt1 ebay scgt1
|
StoneB80
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/09/03 03:54:23
- Status: offline
- Ribbons : 0
Got mail back from Alphacool today:
We are already working on this card. The finished block will be available within the next 8 to 12 weeks at our shop.
Have a great day.
Bitte beachten Sie dass wir uns 10 Tage an unsere Angebote gebunden fühlen.
Please note that we shall remain bound by our offer for 10 days
Mit freundlichen Grüßen / Best Regards
Taner Demirci
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig/Germany
Telefon/Phone: +49 531 28874-0
Durchwahl/Direct dial: +49 531 28874-0
Fax: +49 531 28874-22
happy days :D
|
StealthArsenal
I may try out the 980ti variant. I dont want to see any of the pcb at all.
The "980ti classified" variant is simply a 780 classified block.
If you would like to use an affiliate code to register a product, feel free use this one: >Click Here< This is not my affiliate code! This is a random users code. This code will change often, and you will never be told who it belongs to! If you would like the possibility of your code being listed above, it must be in your signature block. I will not take requests to use a specific code.
|
I'll be waiting for that Alphacool version if it is true. I want a full block without seeing any of the PCB period.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
BytalesXT
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2013/12/15 06:04:03
- Status: offline
- Ribbons : 0
Is alphacool working on a waterblock, like all their waterblocks are, in that their not true fullcover blocks ? If zou check some review of their waterblocks, youll see that allthough it cools the gpu okay, the VRMs are badly cooled, apart from that it has high restriction rating compared to true blocks like those from EKWB, Aquacomputer, etc.
Thats why i decided in the end against it. Also 8 to 12 weeks seems like a lot of time, 3 months for a waterblock, i mean, whats the deal ? do they have a pentium 286 that makes the calculations for the waterblock ???
I think in the end im going to return the classified and get a FTW 1080, just because no proper waterblocks are available. I would get a zotac arctic storm if they were available.
Besides, the FTW 1080 is 100 something euro cheaper, these can go to EKWB for the waterblock.
|
jxm1013
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2016/06/20 09:45:23
- Status: offline
- Ribbons : 0
Waterblock for 1080 Classified
2016/09/09 15:38:48
(permalink)
BytalesXT
Is alphacool working on a waterblock, like all their waterblocks are, in that their not true fullcover blocks ? If zou check some review of their waterblocks, youll see that allthough it cools the gpu okay, the VRMs are badly cooled, apart from that it has high restriction rating compared to true blocks like those from EKWB, Aquacomputer, etc.
Thats why i decided in the end against it. Also 8 to 12 weeks seems like a lot of time, 3 months for a waterblock, i mean, whats the deal ? do they have a pentium 286 that makes the calculations for the waterblock ???
I think in the end im going to return the classified and get a FTW 1080, just because no proper waterblocks are available. I would get a zotac arctic storm if they were available.
Besides, the FTW 1080 is 100 something euro cheaper, these can go to EKWB for the waterblock.
Just a heads up, but the ArcticStorm is available on Newegg right now 
(Build in Progress)Case: Corsair 900D Motherboard: Asus z170 Maximus VIII Formula Processor: Intel i7 6700K Processor @ 4.00 Ghz (stock speeds)Cooler: Custom EK/Alphacool Water loopRam: Corsair Dominator Platinum 32GB DDR4 3200Mhz (w/ Light Bar Upgrade Kit)Graphics: EVGA GeForce GTX1080 FTW (w/ EK GPU Waterblock)Primary SSD HD: SAMSUNG 950 Pro 256GB Secondary HD: WD Blue 1 TBOS: Windows 10 Pro 64 Bit[siz
|
BytalesXT
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2013/12/15 06:04:03
- Status: offline
- Ribbons : 0
Re: Waterblock for 1080 Classified
2016/09/10 01:43:36
(permalink)
jxm1013
BytalesXT
Is alphacool working on a waterblock, like all their waterblocks are, in that their not true fullcover blocks ? If zou check some review of their waterblocks, youll see that allthough it cools the gpu okay, the VRMs are badly cooled, apart from that it has high restriction rating compared to true blocks like those from EKWB, Aquacomputer, etc.
Thats why i decided in the end against it. Also 8 to 12 weeks seems like a lot of time, 3 months for a waterblock, i mean, whats the deal ? do they have a pentium 286 that makes the calculations for the waterblock ???
I think in the end im going to return the classified and get a FTW 1080, just because no proper waterblocks are available. I would get a zotac arctic storm if they were available.
Besides, the FTW 1080 is 100 something euro cheaper, these can go to EKWB for the waterblock.
Just a heads up, but the ArcticStorm is available on Newegg right now
Yah, i ordered 2 of them  Im sending the Classified back to caseking.de Well, i guess i wont have a EVGA card for now.
|
EK_Luc
EK Forum Support
- Total Posts : 314
- Reward points : 0
- Joined: 2014/11/05 10:43:15
- Status: offline
- Ribbons : 2
scgt1
EK_Luc
scgt1
EK-Luc Can you get the measurements from the pci plate to the center of the terminals? I need to know how far the terminals are off from the EK-FC R9-290X - Acetal+Nickel (Rev.2.0) So I know if I need to completely get different fittings to go from the GPU to my Kryo m.2 waterblock. The following link is the area I'm talking about. It appears from images there is a pretty good difference between the distance of g 1/4 ports on the two blocks. http://imgur.com/oYClaaj Or at least the measurement from the edge of the block (i/o plate side) to the middle of each terminal. I can only assume the block fits to the edge of the pcb since there are no installed photos. That measurement will be close enough for what I need.
Sorry I was out for the weekend.
Since I don't have any of those blocks in hands, I can't measure them. Sorry again.
This forum again not notifying me of reply's lol.
You don't have a 1080 FTW block to measure?
I don't buy all the blocks that we release...sorry
|
Guys,
I asked Jacob on twitter about an EVGA block for the classified and he has confirmed they will be releasing on. Also power adapter availability in October.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
AHowes
FTW Member
- Total Posts : 1546
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 1
What's the power adapter?
Intel i7 6700K Custom Water Cooled Asus Z170 Maximus VII Hero G.Skill 16GB 3600MHz DDR4 15,15,15 Samsung 950 Pro 512GB/Samsung 500GB Evo EVGA 1080 Classified SLI Water Cooled 27" Asus ROG SWIFT 1440 165Hz EVGA SuperNova G2 1000WATT P/S Thermaltake Core X9 Case w/ EK Cooling
|
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
Waterblock for 1080 Classified
2016/09/10 14:16:46
(permalink)
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
AHowes
FTW Member
- Total Posts : 1546
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 1
Re: Waterblock for 1080 Classified
2016/09/10 15:01:17
(permalink)
Let's see some pics please! So you used .5mm pads for vram and 1.0mm pads for the power reg?
post edited by AHowes - 2016/09/10 15:15:48
Intel i7 6700K Custom Water Cooled Asus Z170 Maximus VII Hero G.Skill 16GB 3600MHz DDR4 15,15,15 Samsung 950 Pro 512GB/Samsung 500GB Evo EVGA 1080 Classified SLI Water Cooled 27" Asus ROG SWIFT 1440 165Hz EVGA SuperNova G2 1000WATT P/S Thermaltake Core X9 Case w/ EK Cooling
|
BytalesXT
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2013/12/15 06:04:03
- Status: offline
- Ribbons : 0
Re: Waterblock for 1080 Classified
2016/09/10 21:44:22
(permalink)
So someone from EVGA confirmed waterblock for the Classified ? Which firma makes it ?
|
Re: Waterblock for 1080 Classified
2016/09/11 06:57:37
(permalink)
Yes. As I said Jacob has confirmed a waterblock for the Classy. I don't work for EVGA so I have no idea who is making the block. I am going to go out on a limb and say it is EK large in part because they wouldn't put out a comment essentially indicating demand would be low if they sold it straight from their website.
Main Rig: |Intel Core i7 5820K||Asus X99 Deluxe||Asus Xonar DSX||Phanteks Enthoo Evolv TG||EVGA Supernova P2 1000||EVGA GTX 1080 Classified||Samsung Evo 500GB SSD||EKWB Predator 360||Logitech Z5500||2 Acer Predator XB271HU||32GB GSkill Ripjaws 4||EVGA Torq X10||Corsair K70||Cablemod PSU Cables (Green/Black)|
|
Re: Waterblock for 1080 Classified
2016/09/13 23:23:18
(permalink)
EK_Luc
scgt1
EK_Luc
scgt1
EK-Luc Can you get the measurements from the pci plate to the center of the terminals? I need to know how far the terminals are off from the EK-FC R9-290X - Acetal+Nickel (Rev.2.0) So I know if I need to completely get different fittings to go from the GPU to my Kryo m.2 waterblock. The following link is the area I'm talking about. It appears from images there is a pretty good difference between the distance of g 1/4 ports on the two blocks. http://imgur.com/oYClaaj Or at least the measurement from the edge of the block (i/o plate side) to the middle of each terminal. I can only assume the block fits to the edge of the pcb since there are no installed photos. That measurement will be close enough for what I need.
Sorry I was out for the weekend.
Since I don't have any of those blocks in hands, I can't measure them. Sorry again.
This forum again not notifying me of reply's lol.
You don't have a 1080 FTW block to measure?
I don't buy all the blocks that we release...sorry
Oh I assumed since you were here with EK you worked for EK and were located with them. Hence the thought you had them on hand or at least the model used in a light box for the pre order news release and the store page. Oh well it appears the 60* will work out pretty dang good by holding them up against my side window "GUESSING" where the G1/4 ports will line up in relation to my current 290X. Should look much better then what I have going on currently anyway with a 45* from my gpu block to a straight in my Kryo M.2 ssd block in a tight space.
Heatware scgt1 ebay scgt1
|
