Thank you bcavnaugh. I'll use my old photobucket account, I guess. And I used Hydro because I had modded the factory kit and didn't want to infringe on evga. I had forgotten about the Hydro series, so inadvertent infringing anyway.
Will edit the original post with the pics in a few.

Hey tam!

Very nice paintjob! What paint did
You use ? And what was your preparation method ?

Max

vulterey
Hi,
 
I see that everyone got their own ideas how to over with 980 AIO cooler on our Titans.
This is my idea. As I am not too good with painting i decide to go just for sticker. Obviously this is just project from photoshop, but I hope I will find way to print it nice way, maybe even with this TITAN in metalic with strips. This is just project for top of the shroud, but I need to tweak this into side version as well. If EVGA is interested in this project by any way and wish to print them for your lovely customers I will with pleasure give you files for 2 sets of those stickers.     

That is pretty cool.

CoercionShaman

vulterey
Hi,
 
I see that everyone got their own ideas how to over with 980 AIO cooler on our Titans.
This is my idea. As I am not too good with painting i decide to go just for sticker. Obviously this is just project from photoshop, but I hope I will find way to print it nice way, maybe even with this TITAN in metalic with strips. This is just project for top of the shroud, but I need to tweak this into side version as well. If EVGA is interested in this project by any way and wish to print them for your lovely customers I will with pleasure give you files for 2 sets of those stickers.     

That is pretty cool.

Thanks, now I need to find a good company to print this for me. 

tamvegas

vulterey

CoercionShaman

vulterey
Hi,
 
I see that everyone got their own ideas how to over with 980 AIO cooler on our Titans.
This is my idea. As I am not too good with painting i decide to go just for sticker. Obviously this is just project from photoshop, but I hope I will find way to print it nice way, maybe even with this TITAN in metalic with strips. This is just project for top of the shroud, but I need to tweak this into side version as well. If EVGA is interested in this project by any way and wish to print them for your lovely customers I will with pleasure give you files for 2 sets of those stickers.     

That is pretty cool.

Thanks, now I need to find a good company to print this for me. 

You may want to check out the company I used for the lettering. They offer to make vinyl self-adhesive art from any artwork you have. I believe they can do metallic lettering/art also. They'll give you a quote beforehand.
 

Thanks for hint, but I need something from UK ;]

I know this was most likely mentioned before but how do i get a hold of a second set of screws to mount my 2nd fan ? I am using sp120 high perfs

What size are they ? And should I get them a tiny amount longer since it will be going through the case also ?

jeff1304
What size are they ? And should I get them a tiny amount longer since it will be going through the case also ?

You can find radiator screws on amazon also... in case my link gets auto-removed, just search for "radiator fan screws" and a few options will show up.
 
http://www.amazon.com/XSP...ds=radiator+fan+screws

jeff1304
What size are they ? And should I get them a tiny amount longer since it will be going through the case also ?

I think they are 6-32.  Just take one into ACE and tell them you need 4 like the ones in your hand in 1.25" (or about 30mm).
 
EDIT:  Or buy them off the Corsair site if you can't find black ones at the local store.  Asetek makes them both anyway.

CoercionShaman

jeff1304
What size are they ? And should I get them a tiny amount longer since it will be going through the case also ?

I think they are 6-32.  Just take one into ACE and tell them you need 4 like the ones in your hand in 1.25" (or about 30mm).
 
EDIT:  Or buy them off the Corsair site if you can't find black ones at the local store.  Asetek makes them both anyway.

Thanks, I'll swing past after work and grab some and ones a bit longer to try using rubber washers. 

I ended up finding an extra stock cooler for this same reason. I want to keep the led on and have the hoses come out but want the original in case I sell it later on. I'll try to work on it this weekend and will definitely post pics when I do.

hey all, I have a 980 Hybrid, been installed for 3 days now. I put another 120m/m fan on it for push/pull. I have an old case which I absolutely love. its a Coollermaster Cosmos Pure ( the Cosmos series case, all Black, has noise dampening foam on both side panels  ). again, it has only been 3 days but working nice, regular web surfing temp hovers at 27-28 C.
 under load, gets up to 34C. I haven't been playing many games yet, letting this thing settle and working it slowly for now.
Grabbed it from Newegg and was able to get the 2 free games, sweet. Hoping in the near future to check out the VR (virtual reality) gaming. since you will need at least a GTX970 min according to Occulos Rift. But I am going to wait for the one that will be released by Steam, cant remember name at the moment.
But I also want to get ready for Direct X 12. For a monitor, I am using my 80 inch Vizio 3D TV, and it is sweet for gaming lol. 
 

Spathi
Rather than sticking the hoses out the front of the card (like ShadowYuna), I want the hoses to be flush (right angles) with the top. I have little room (1cm or so between top of card and case wall).
How are the hoses attached to the pump?
Would it be easy to remove the hoses from the pump and place two 90* angled fittings somehow?
 

I dont think that is possible. Due to it is already factory sealed you wont be able to customised the pump itself.
 
I try to do what you exactly saying but there were no way I could disconnect the horse from pump.
 
It would be easier if the pump is something like below pic
 

 
I wish EVGA do better option on next Hybrid Cooler
 
Rumor: I heard that new GTX980ti or TITAN X overclocked version will comes with Hybrid cooler like EVGA from various company such as Asus , Gigabyte , GALAX , MSI.

mjs85
The pump is not loud but clearly audible, a "metallic" sound comparable to a HDD at idle. Less annoying than my previous Kraken G10 "VRM burner" + Kraken X31 but definitely louder than reference GTX980/TitanX cooler at 26% fan speed. I have 2 upgrade kits bought within two week so I doubt it is "only my rig"...
 
Someone asked for a video so here you are:

 
My PC is very silent (<700 rpm fans, no HDD). I used to plug the pumps into motherboard header. Thanks to that I was able to turn pumps off at wiil.
 
Actually it isn't that bad as it sounds on that video, especially when a case is closed. Also, it is much quiter when you reduce voltage but I'm not sure if it is safe in the long run.

Hey - wondering about the connection that you did. I'm thinking about trying to connect the pump straight to motherboard just because of the buzzing sound. So I would just like to clarify:
 
1) Instead of disconnecting the blower fan and connecting the pass-through of the hybrid AIO, you have left the blower fan connected and led out the AIO cable and connected it to motherboard (using an adapter cable?)?
2) Couldn't you just plug the hybrid AIO directly to motherboard 4pin PWM? Or it has the wrong connection? I'm asking because I plug my other AIO CPU cooler straight to the motherboard. If so - would this be a right cable? 
 
Thanks a ton for the answers!

Hi,
 
OK: First posting :-) And sorry bad english.
 
I order two EVGA Titan X Hydro Copper on a german webstore to replace my single EVGA GTX 980 SC.
But no store in germany can deliver this cards. And no webstore can say me a delivery date.

Please EVGA can you give me more informations when we can see Titan X Hyros on the german/EU market?
 
Thanks
 
Rohal / Andreas