Well when the time comes to sell the 1080,keep me in mind
robbysites

it's alive! and fairly hot too with 3 cards in there, need for the FTW hybrid kit to get released :)
 

 
Cable management... later.

It seems the amount of heat put out by all 3 of these folding at once is a bit much for the portable AC unit in the computer room(+ the house unit) I'll have to wonder how much that's adding to the electric bill too, not only from the third card, but from the fact the room AC has to be running full power just to fail to keep the room cool.
 
Seems I may be selling the third card as soon as I get the powerlink for it (will need to check the terms there, if I can give it away as a free bonus with the card, and whatnot.
 
Really wanted to keep it, but it doesn't seem viable for that.

Yeah, the portable AC unit exhausts outside, and seems to work well enough with 2 cards going at once, but a third seems to push it beyond the limits of it's cooling (at least keeping it where I'd like it, if I allowed the temp. to get to say 76f + then it might work, but that's a bit hot for me.
 
Good news is that it's starting to cool down a bit that I might be able to open a window to drop temps a bit in the room if it keeps getting cooler.
 

z999z3mystorys
New update, 2 Hybrid kits incoming today, so folding will be down a bit while I get them set up, the FTW DT will stay on air however.
 

Takeeeeeeeeeeeeeee yourrrrrrrrrrrrrrrrrrrr timeeeeeeeeeeeeee,no need to rush a job like that, heck just shut down for a day or 5 and dust that case out really really realllyyyyyyyyyyy good. Spit shine that bad boy up. Probably be a good time to sleeve cables, format the drives and do some OCing too. Might even want to pop the ole keys off the keyboard and give them a good going through too!!! Re-site the laser on the mouse, wash that nasty ole mouse pad, dust off the speaker grills, disassemble and lube the casters on your chair. Significant other might have things for you to do too, get that done to impress there is really no need to rush this at all.   
 
 
 
 
EDIT: These suggestions have NOTHING to do with the TZC.  I am here to help is all.

HK-Steve
I had to re-engineer my cooling in my workshop this year..
12x GPU's Folding 24\7 sure adds some heat. and over 120 cores Crunching at the same time.. Oh Yeah, that adds some more heat..
 
Will take some photo's of my test setup and post them tomorrow. bedtime here in Switzerland.... 

Would be nice to see a Master Folder/ Cruncher set up!!!

AH, now this is nice, max temps are at 55c folding with two other FTW cards in the system granted it's 10c higher than the advertised temps, but then again, that's likely not with two other cards in the system heating everything up and the Hybrid above both of them.
 
granted it IS OCed a bit, +50 core beyond FTW speed and +200 memory as well, and it's working on a 1 million PPD WU (9195)

z999z3mystorys
AH, now this is nice, max temps are at 55c folding with two other FTW cards in the system granted it's 10c higher than the advertised temps, but then again, that's likely not with two other cards in the system heating everything up and the Hybrid above both of them.
 
granted it IS OCed a bit, +50 core beyond FTW speed and +200 memory as well, and it's working on a 1 million PPD WU (9195)

That's a nice upgrade. How do you have the cards installed, where is the hybrid card mounted?? How loud would you say it is? Enjoy, I'm jelly! :)

howdy2u2

HK-Steve
I had to re-engineer my cooling in my workshop this year..
12x GPU's Folding 24\7 sure adds some heat. and over 120 cores Crunching at the same time.. Oh Yeah, that adds some more heat..
 
Will take some photo's of my test setup and post them tomorrow. bedtime here in Switzerland.... 

Would be nice to see a Master Folder/ Cruncher set up!!!

OK, Here are a couple of photos and test setup of my workshop cooling.
 
On our Terrace, is about 8'c at the moment here, I have 3 HP servers. These will go into my workshop once I have run a new power circuit and build a shelf.
Top one is a HP DL580 G7 with 128Gb ram and Intel 2.4Ghz CPU's, 4x with 10 cores each, total 40 cores.
Middle one is a HP DL585 G7 with 128Gb ram and AMD 2.6Ghz CPU's, 4x with 12 cores each, total 48 cores.
Bottom one is a HP DL580 G5 with 32 Gb ram and Intel 2.93Ghz CPU's, 4x with 4 cores each, total 16 cores. Grand total 104 cores.
 

 
The test fan setup, I cut into the existing fresh air recirculation filter box, cut a 150mm hole, fitted some pipes, air is being pulled by a 500m2/h inline duct fan.
Made a sound absorber out of wood for this first test stage, worked a treat. The black 250mm pipe on the left are the ones I will build next week.
The pipes, sound absorbers and fan will be mounted up on the roof.
 
All the air is pulled out the window by 4x 150mm inline duct fans, mounted in a shelf the hold all my laser disks and other equipment.
 

 

 
I have 5 Folding computers, a mix of AMD and Intel all on ASUS motherboards, running SSD and AIO coolers.
I also Crunch on these, but always leave a core spare per GPU. Adds 18 more cores to Crunching.
 
5x EVGA GTX970's.
5x EVGA GTX 980ti's, one is a Hybrid.
2x EVGA GTX1080 FTW.
 

 
This one below with the 1080's installed is part of my Phobya dual motherboard case.

 
Hope that shows a little bit of the Folding and Crunching power..

OK Bill, You can not say that without showing photos!!!!!!!!

More on the way
 
 Inside
 

That little White Hole in the Door way is the Intake for the Air unit on the other side.
About 8 months after I changed all this the Air Unit Burned up.
So I tore it all back down, though I do still have an 8" hole in my ceiling.
Outside
 

bcavnaugh
That little White Hole in the Door way is the Intake for the Air unit on the other side.
About 8 months after I changed all this the Air Unit Burned up.
So I tore it all back down, though I do still have an 8" hole in my ceiling.
Outside
 

These pics make me feel so much better re: my setup for cooling -
Nice job to both of you!
 
Plus the temps are finally starting to drop here in Jax.
rs