du·al·i·ty
d(y)o͞oˈalədē/
noun
[INDENT]1.
the quality or condition of being dual.
"the novel's deep duality about human motive"
2.
an instance of opposition or contrast between two concepts or two aspects of something; a dualism.
"the photographs capitalize on the dualities of light and dark, stillness and movement"[/INDENT]

 

[LIST]

Intel i5 6600K - Delidded - 4.7 GHz @ 1.488v load

Gigabyte GA-Z170N-Gaming 5

G.Skill Ripjaws V 3200/16, 2*4GB

Gigabyte GTX 1070 G1 Gaming

ADATA SP900 m.2 256GB

OCZ Vector 128GB

Antec EDG750 80+Gold Modular PSU with CableMod ModFlex custom cable set and combs
[/LIST]

 

[LIST]

AMD 7870K

Gigabyte GA-F2A88XN-WIFI

Kingston HyperX Fury 1866/10, 2*8GB

Samsung 840 EVO 256GB

Antec VP450 PSU
[/LIST]

 

[LIST]

Custom Frozen-Q Apex mATX case

Frozen-Q resevoir

4 * Be Quiet! Pure Wings 2 80mm

4 * Phanteks PH-F140MP

1 * Phanteks PH-F120MP

2 * Phanteks PWM Hub (new revision)

CableMod RGB 60cm LED

CableMod light blue sleeved SATA cables

Darkside White LED strips

Phanteks Extensions, 24-pin and 8-pin (red/black)

2 * Alphacool NexXxoS XP³ Light - Acetal - Intel/AMD

Alphacool NexXxoS ST30 240mm

Alphacool NexXxoS XT45 280mm

Alphacool NexXxoS GPX - Nvidia Geforce GTX 1070 M01

Alphacool VPP755 EisPumpe

Alphacool Eisdecke D5 Top - Plexi G1/4 - V.3

4 * Alphacool G1/4 Passthrough Connector - Black

4 * Alphacool Eiszapfen 3/8" ID x 5/8" OD Compression Fitting - Black 6-pack

10 * Alphacool Eiszapfen 45° Angled Rotatable Adapter Fitting - Black

10 * Alphacool Eiszapfen 90° Angled Rotatable Adapter Fitting - Black

4 * Phobya LEDready Twin 5mm Ultra-bright white 30cm - Black

20 feet of Mayhems 3/8"-5/8" (10/16mm) Ultra Clear Tubing

Mayhems X1 UV Blue Concentrate 250ML
[/LIST]

rjohnson11
I haven't seen many dual system mods so this should be very interesting.

should be :)

So I just put in a big order at MNPCTech stay tuned! :D
two vandal switches in black along
with 2-pin connectors and one switch plate in black

12x24 round modders mesh

Black pop rivets for the case

PC Chassis pop rivet tool

2* 12x12 red colored acrylic sheets

6/32 – ¼ red anodized screws

2 white 12 inch LED strip and one red 12 inch LED strip

The ATX pin removal tool

Interesting....

The top has a tab with a spot for two rivets initially, but I had to chop that down. Along with this, I brought the whole bottom of the tray and expansion slots up to the last expansion slots height. This, technically puts me at 214mm. Once I'm done the second one, this case will be dual ITX with both a removable tray. I'm keeping the trays up to the size of the CPU cutout on these trays for cable management. I'm also still debating of the orientation of both of these. I have the choice between both regular, both reverse or one of both and have windowed side panels on both sides.
The trays them selves are done, just a tiny bit of sanding left and the paint will come later on. The turquoise paint was only put on for drawing purposes :)

mnpctech
Excellent work so far! This is going to be Epic!

 
Thank you and I certainly hope! :)
 

With the second ITX tray done, I've decided on this layout!

Finished building the rear panel :)

Looking better and better with each pic.

So I started working on the front of the case, behind the P400's front panel. The front of this case will be turned into exhaust. A spot for both 140mm and 120mm fans for the top and bottom of the case. This is part one of the bracket I will be creating for the PSU and power splitter. The PSU mount I'm using is from a Bitfenix Prodigy M. The aluminium sheet came from one of the Case Labs trays I butchered. No sense in wasting that high quality aluminium! :)

And done! :) Only the mounting holes for the whole thing to the front panel and a better spacer for between the PSU and Power Splitter mounting plate!

 
Looks like a lot of work, but well worth it.       =)

 
So I'm back from a week of vacation visiting my family :)
 
While home, I was talking to my father about my current mod and he said he found a few years ago, 4 lengths of aluminium square tubing that if I could use them, I could have them. Ends up, I brought around 448"++ of square tubing (Yes, that's almost 40 feet) of thick square tubing. I had to cut them in around 32"+ lenghts to be able to bring them in the car. These should help me quite a bit in my build!
 
I might be able to make more progress this week, I've spent quite a bit drawing out the front panels cuts this afternoon, so that's what you should be seeing next :)
 

Looking good so far

So, I with the square tubing aluminium, I made myself 12 of these, anyone care to guess what they're for? :)