EVGA

Temps and fan speeds?

Author
TheOneAndOnly660
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2014/01/28 21:44:42
  • Status: offline
  • Ribbons : 0
2016/02/04 22:48:14 (permalink)
If you have an ACX 2.0 card, what do you run your fan speeds at and what temps do you get with them? I think i have my fans set a bit high and just wanted to know what you guys put them at and what your max temps were
 
My card: EVGA GTX 970 SSC ACX 2.0
#1

3 Replies Related Threads

    egainey1981
    Superclocked Member
    • Total Posts : 179
    • Reward points : 0
    • Joined: 2016/01/02 22:24:28
    • Status: offline
    • Ribbons : 1
    Re: Temps and fan speeds? 2016/02/05 00:11:49 (permalink)
    I had a 960 SSC ACX 2.0 with the fans set to auto running 3DMark Fire Strike I didn't get over ~53C. Running Fallout 4 maxed out after couple hours of play fans on auto temps were around 50. For both these scenarios I was on boost clock.



    EVGA DG-87, Asus Hero Maximus X Z370, i7-8700K, EVGA 280MM CLC , GSKILL 16GB (4x4)(3200)
    EVGA GTX 1080Ti FTW3, 250 GB 960 EVO M.2, 1TB & 2TB Seagate Barracuda, EVGA Supernova 1200 P2
    #2
    ErinW
    EVGA Alumni
    • Total Posts : 1149
    • Reward points : 0
    • Joined: 2014/06/03 06:51:53
    • Status: offline
    • Ribbons : 3
    Re: Temps and fan speeds? 2016/02/05 03:17:04 (permalink)
    I've got two 960 SSCs in a CM Storm Trooper. Max temps I've seen are around 70°C, idle is around 32°C, motherboard 28°C. Never seen the fans go higher than 30%. I was getting lower temps with one card in a CM Storm Scout, but that had the side fans directing air on the card, and no SLI. I've got a 120mm fan on the bottom pushing air towards the cards.
    #3
    imbrezzy
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2016/02/07 05:49:24
    • Status: offline
    • Ribbons : 0
    Re: Temps and fan speeds? 2016/02/07 06:01:18 (permalink)
    Hi Guys I have 960 2gb ACX 2.0 card ssc edition, when i turned on the computer the fan will start spinning and no display anymore but when i used another video card it working fine.. please someone help me with this problem. anyone encounter this problem? for this time im using the integrated graphics from motherboard
     
    #4
    Jump to:
  • Back to Mobile