EVGA

Helpful ReplyQuestion about 970 SLI

Page: 12 > Showing page 1 of 2
Author
Post
Essentials Only Full Version
Unreal3man
New Member
  • Total Posts : 92
  • Reward points : 0
  • Joined: 2014/10/01 18:15:16
  • Location: California
  • Status: offline
  • Ribbons : 0
2015/01/11 18:13:35 (permalink)
I just recently purchased an EVGA GTX 970 SSC to go along with my EVGA GTX 970 FTW card. I have it all hooked up including the SLI Bridge (in the correct SLI compatible slots in my motherboard) and with all the nvidia drivers installed. When I go into the Nvidia Control Panel, it says "to use maximum 3D performance, connect the SLI-ready graphics cards with an SLI connector". I am attaching a few pictures: one showing my nvidia control panel and the other showing how I am hooking up the 2 cards with the SLI bridge. I am wondering if maybe I don't have the SLI bridge hooked up right? I tried multiple different ways in plugging that in, I even went to frys today and purchased another SLI bridge. Same problem. I am very new to SLI and am wondering if I may be forgetting something? 
PS: Already re-installed all drivers before SLI installation. Here are my PC specs if needed, thank you:
 
CPU: I7 4770K (4.2 Ghz)
GPU: EVGA Geforce GTX 970 FTW
Mobo: MSI Z87-GD 65
Ram: 8GB
Windows 8.1

Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
#1
List Solutions Only

35 Replies Related Threads
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 18:14:41 (permalink)
    Screenshot of control panel

    Attached Image(s)


    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 18:18:25 (permalink)
    Try THIS to see if it helps get your SLI up and running. 
     
    NOTE: Read all the readme's included inside the file.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 18:45:14 (permalink)
    Hello, thanks for the quick response. I read through the forum you linked and am trying to run the "different SLI auto" think you mentioned. I got to the step where I am to run each installer, tried to run the first one in admin, opened the small admin box on my screen and quickly went away. The read me asked to click "patch" at that step, though nothing on my screen asked me to click a patch button. Assuming that it had worked and when clicking the second installer, I am getting a message saying "please extract everything from the package including the contents from the tools folder". I had extracted everything from that download though so I am not sure why it is telling me to do this? thanks
     

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #4
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 18:52:55 (permalink)
    Also I doubt this would fix my issue as my current motherboard is SLI compatible

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #5
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 18:56:46 (permalink)
    Unreal3man
    Hello, thanks for the quick response. I read through the forum you linked and am trying to run the "different SLI auto" think you mentioned. I got to the step where I am to run each installer, tried to run the first one in admin, opened the small admin box on my screen and quickly went away. The read me asked to click "patch" at that step, though nothing on my screen asked me to click a patch button. Assuming that it had worked and when clicking the second installer, I am getting a message saying "please extract everything from the package including the contents from the tools folder". I had extracted everything from that download though so I am not sure why it is telling me to do this? thanks

    Disable your anti-virus then re-download and re-extract the file and try again. If running install #1 does not start a program that includes a patch button then you will need to manually start DifferentSLIAuto.exe and press patch then run install #2


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #6
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 18:57:04 (permalink) ☄ Helpfulby Unreal3man 2015/01/11 19:01:53
    Unreal3man
    Also I doubt this would fix my issue as my current motherboard is SLI compatible

    It's worth a shot.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #7
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:01:30 (permalink)
    ON the actual video cards, the bridge should be connected at the very far left right? because it looks like it can be connected in two different spots

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #8
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:03:17 (permalink)
    When using a flexible/hard 2-way SLI bridge you can connect it to either one.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #9
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:07:55 (permalink)
    Like this...
     

     
    or like this...
     



    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #10
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:10:51 (permalink)
    Got it. Thank you. Also, after disabling my anti-virus software, and re-extracting, I am not getting this when trying installer 1: [E] : Could not find "nvlddmkm.sys", please place it in the patcher directory. 

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #11
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:11:35 (permalink)
    Unreal3man
    Got it. Thank you. Also, after disabling my anti-virus software, and re-extracting, I am not getting this when trying installer 1: [E] : Could not find "nvlddmkm.sys", please place it in the patcher directory. 


    Are you running driver 347.09?


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #12
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:15:47 (permalink)
    yes i am

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #13
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:18:50 (permalink)
    Copy the nvlddmkm.sys file located inside the nvlddmkm347.09 folder and place it into the C:\DifferentSLIAuto1.1_2 folder and then run install #2 then reboot. 


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #14
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:22:55 (permalink)
    In the read me when it says to extract to 
    c:\DifferentSLIAuto1.1_2 
     does that mean there was already a pre existing file under that name?
     

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #15
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:25:13 (permalink)
    Unreal3man
    In the read me when it says to extract to 
    c:\DifferentSLIAuto1.1_2 
     does that mean there was already a pre existing file under that name?

    It means you should have extracted all the files from the downloaded DifferentSLIAuto1.1_2.rar to C:\DifferentSLIAuto1.1_2 


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #16
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:31:34 (permalink)
    Okay I just ran installer #2 and seemed to work fine. Then restarted. Will i still need to complete install #1 for it to work?

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #17
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:33:20 (permalink)
    No, you don't need to run Install #1 if you manually put the nvlddmkm.sys file located inside the nvlddmkm347.09 folder into the C:\DifferentSLIAuto1.1_2 folder.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #18
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 20:33:25 (permalink)
    Here is a screenshot of my NVIDIA control panel in SLI settings if needed
     

    Attached Image(s)


    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #19
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 20:53:15 (permalink)
    Can't see your pic. Did it work?


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #20
    HeavyHemi
    Insert Custom Title Here
    • Total Posts : 15665
    • Reward points : 0
    • Joined: 2008/11/28 20:31:42
    • Location: Western Washington
    • Status: offline
    • Ribbons : 135
    Re: Question about 970 SLI 2015/01/11 21:08:29 (permalink)
    Sajin
    Can't see your pic. Did it work?


    Same issue asking for the SLI connector.

    EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
     
    #21
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 21:15:19 (permalink)
    Looks like you're gonna have to spend some money to figure out the issue. Buy more bridges or RMA the GPU's. Time to contact EVGA tech support to see what they have to say.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #22
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 21:16:48 (permalink)
    Didn't work. Trying one last thing and re installing windows completely... fun

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #23
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 21:17:57 (permalink)
    Maybe you can't SLI the FTW version with the SSC. I'd be pretty surprised if you can't though
     

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #24
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Question about 970 SLI 2015/01/11 21:18:45 (permalink)
    Unreal3man
    Maybe you can't SLI the FTW version with the SSC. I'd be pretty surprised if you can't though

    You should be able to without any issues.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #25
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 21:23:58 (permalink)
    Yeah I thought so too. Once I reinstall windows and the drivers, I will try SLI again and post on the forum once again. Sorry to the others with this similar problem reading the forum.. Very frustrating!

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #26
    Squall_Rinoa86
    FTW Member
    • Total Posts : 1735
    • Reward points : 0
    • Joined: 2010/07/26 14:09:48
    • Location: The Empire State -> Hyde Park
    • Status: offline
    • Ribbons : 5
    Re: Question about 970 SLI 2015/01/11 21:49:18 (permalink)
    .... reading all this... I was going to buy the SSC+ of the 970 GTX FTW..

    I may now just buy the 2978 FTW version and just pair it... may cost a bit more and they may lack the Extra power phases.. but I dont want issues like Unreal is having..

    Tho thought that does pop into my mind is your Bio's for your motherboard updated?

    ..WHY the hell does it randomly stick in a hyperlink when I post!?! So annoying.




    PSU: EVGA SuperNOVA 1300 G2
    My Affiliate Code: AN1FW0VMG6
    #27
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 21:56:02 (permalink)
    Yes, mobo fully updated. Good idea on buying identical cards... Just to be safe. 

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #28
    Unreal3man
    New Member
    • Total Posts : 92
    • Reward points : 0
    • Joined: 2014/10/01 18:15:16
    • Location: California
    • Status: offline
    • Ribbons : 0
    Re: Question about 970 SLI 2015/01/11 21:58:18 (permalink)
    WOW! Reinstalled windows and ran that program again mentioned by Sajin earlier... It worked!! Very strange, I must have had some corrupted files somewhere. Thank you so much for the help.
     

    Windows 10 | Asus Maximus IX Hero | EVGA GTX 1080ti Hybrid| I7 7700k (4.8ghz) | Corsair Dominator Platinum 16gb (2x8) DDR4 3000mhz | Corsair RM850 Gold Power Supply | 850 Samsung EVO 1TB SSD X2| 840 Evo 256 GB SSD (Boot) | 1 TB Western Digital Black HD | Asus PG278Q Rog Swift 27" | Asus MX279H 27"
    #29
    HeavyHemi
    Insert Custom Title Here
    • Total Posts : 15665
    • Reward points : 0
    • Joined: 2008/11/28 20:31:42
    • Location: Western Washington
    • Status: offline
    • Ribbons : 135
    Re: Question about 970 SLI 2015/01/11 21:59:56 (permalink)
    Squall_Rinoa86
    .... reading all this... I was going to buy the SSC+ of the 970 GTX FTW..

    I may now just buy the 2978 FTW version and just pair it... may cost a bit more and they may lack the Extra power phases.. but I dont want issues like Unreal is having..

    Tho thought that does pop into my mind is your Bio's for your motherboard updated?

    ..WHY the hell does it randomly stick in a hyperlink when I post!?! So annoying.


    Just for giggles I checked the driver install .inf file and there is only one device ID for the GTX 970 models. So, all of them should run in SLI with each other.

    EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
     
    #30
    Page: 12 > Showing page 1 of 2
    Jump to:
  • Back to Mobile