alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Hey guys and welcome to my In Win G1 project log! I've been busy working on my Thermaltake CaseMOD Invivational build lately and as that is getting close to completion it's time to start a new project! I have been very excited for this project for a while and it's great to finally be able to start working on it! For those in Australia and going to PAX AU, you will be able to see it in the Nvidia area with MSY as one of the Nvidia Battlestation rigs doing 4K G-Sync demos! I want to say a huge thanks to all the sponsors which includes Gigabyte, In Win, Avexir, EKWBs, RamCity, Primochill and Icemodz! Here are the specs: Case - In Win 909Motherboard - Gigabyte GA-Z170X Gaming G1CPU - Intel i7 6700KMemory - 4 x 4GB Avexit Blitz White LED 2400Mhz DDR4 MemoryGPU - 2 x Gigabyte GTX980ti Gaming G1SSD - 2 x 500GB Crucial MX200 SSDsM.2 - 2 x 512GB Samsung SM951 PCI-E M.2 SSDsPSU - Corsair AX860 Cables - Icemodz Fully Custom Individually Sleeved Cables LEDs - Icemodz RGB LED Strips Radiators - EK-CoolStream PE 360 & EK-CoolStreak PE 240Fans - 7 x EK-Vardar F4-120ER (2200rpm) WhitePump - EK-D5 VarioReservoir - PrimoChill 240mm CTR Phase II High Flow D5 Enabled Reservoir SystemFittings - PrimoChill Rigid Revolver Compression Fitting sets of red and black, Various Bitspower angle fittings, pass-throughs and extensionsTubing - Primochill 1/2" Rigid PETG Tube ClearCPU Block - EK-Supremacy EVO - Nickel PlexiGPU Block - EK-FC980 GTX Ti WF3 - Nickel Plexi with clear Plexi inlet/outlet and backplatesCoolant - Mayhems Aurora Silver/White This will be a black, red and white themed system based around the awesome Gigabyte Z170X Gaming G1 motherboard! I want to start off with some pics of the beautiful In Win 909 case! Hope you guys will enjoy this one! Stay tuned for more! Cheers, Alex
post edited by alexciobanu - 2016/05/26 03:51:19
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/12 00:06:04
(permalink)
I will stay tuned, look forward to more progress, and the final completion.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/12 22:46:10
(permalink)
Another of Alex's great mods. Looking forward to another fantastic mod.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/13 04:54:36
(permalink)
You choose really great case for mod. I saw now their site and I see designers done nice job with some of chassis. In Win 909 is aluminum? It's beautiful and elegant. This will be nice water cooling build.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/13 07:59:52
(permalink)
XrayMan I will stay tuned, look forward to more progress, and the final completion.
Thanks mate :D rjohnson11 Another of Alex's great mods. Looking forward to another fantastic mod.
Thanks a lot Robert! I'm very excited for this one :D Vlada011 You choose really great case for mod. I saw now their site and I see designers done nice job with some of chassis. In Win 909 is aluminum? It's beautiful and elegant. This will be nice water cooling build.
Cheers mate! In Win cases are very nice and elegant and yea they are full aluminum. I will be adding my own style to this one of course :P
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/13 10:23:02
(permalink)
Some of case are very nice, some not. They made similar case and Mid Tower but only for ATX motherboard. And I don't like that. Every manufacturer should give only 5cm space more to allow people with E-ATX to install their motherboard. 90% premium motherboards are E-ATX and every ATX Mid Tower case need to support them. Your case is example excellent. I like such serious elegant case. You can install him in living room near some HI-FI or big TV and you room will not look childish at all. With most case today you can't do that.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/15 19:12:34
(permalink)
Hey guys! Here is the case without the outside frame. I will start to give it a little bit of modding love!
HDD cages were riveted in so I had to drill them out!
Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/18 05:56:27
(permalink)
Of course like your other mods I'll be following this one as well.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/19 18:56:36
(permalink)
rjohnson11 Of course like your other mods I'll be following this one as well.
Cheers mate!
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/19 19:26:55
(permalink)
Hey guys! I took the jig saw to the top of the case and expanded the hole in the top. It came out pretty good minus a minor slip when I was fining the cut edges. The case is ready for powder coating now though. Will be a pretty cool colour if anyone can guess :D
Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/19 23:46:07
(permalink)
Very nice. I'm curious how the powder coating will turn out
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/20 22:31:57
(permalink)
rjohnson11 Very nice. I'm curious how the powder coating will turn out
Cheers Robert :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/24 21:39:51
(permalink)
Hi guys! I present to you the Gigabyte Z170X-Gaming G1 motherboard! This thing is a beast and I'm so excited to have it going in the system! With 4-way SLI support, dual PCIe Gen3 x4 M.2 support, integrated watercooling with G1/4" threads, PCIe metal shielding, USB Type-C connection and USB 3.1 support as well as an awesome multi-colour LED trace path that even lights up the rear I/O shield, this is in my opinion one of the best looking and feature packed Z170 motherboards out there at the moment!
Thanks for checking it out guys! Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/26 05:25:20
(permalink)
Gigabyte Gaming G1 GTX 980TIs to go with the Gigabyte Z170 Gaming G1 motherboard! I guess you guys can tell why I named this build In Win G1! Thanks a lot to Gigabyte for the support on this project! Like I said for the motherboard in the previous post, the same for these GPUs, some of the best 980TIs out there at the moment. And they are really good looking too! I'm not sure if I mentioned before but PAX AU is coming up this weekend and this build will be on display in the Gigabyte area at the MSY booth! Anyone from Australia and going to PAX make sure to check it out. Also I will be stationed at the Cooler Master booth doing some live modding and workshops, please stop by and say hi! Now lets check out these cards!!!
980TI sandwich anyone?
Thanks for checking it out and stay tuned for more! Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/10/26 20:42:47
(permalink)
Here's the internal chassis back from powder coating and some more pics of the GPUs and MB together :)
Thanks for checking it out and stay tuned for more! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/01 01:33:10
(permalink)
Awesome red/black theme. Are you going to mod the video cards with a red/black theme as well?
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/03 01:30:41
(permalink)
rjohnson11 Awesome red/black theme. Are you going to mod the video cards with a red/black theme as well?
Theme will be red black and white! Card are already black with white accents and they have 7 colour LEDs so I can change that. The system will have the cards aircooled first and then will watercool them as well so nothing to mod on them really :)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/03 01:32:47
(permalink)
Hey guys! Back with another hardware showcase update this time for EKWBs who have kindly supplied most of the watercooling gear that will be going in the system! Very sexy packaging as always from EK!
The white Vardar fans, 2200rpm build for radiators with excellent static pressure!
PE 240 and 360 rads, 45mm thick.
And the stars of the show, the waterblocks for the Gigabyte GTX 980TI Gaming G1 cards!
Also included are clear inlet/outlet and backplates
There is also an EK-Supremacy EVO nickel plexi CPU block going in as well! Thanks for checking it out guys and stay tuned for more! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/03 04:49:12
(permalink)
Welcome back from PAX AU. Thanks for the update.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/03 19:37:25
(permalink)
rjohnson11 Welcome back from PAX AU. Thanks for the update.
Thanks Robert! I need to get the updates flowing and the build logs up to date with the build :P Should be getting it back sometime this week :D
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2884
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/05 13:19:09
(permalink)
Very cool looking can't wait to see the finished project!
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/05 16:37:06
(permalink)
nikkocortez Very cool looking can't wait to see the finished project!
Thanks mate :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/06 17:29:19
(permalink)
Custom vinyl on EK rads and fans!
Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/07 00:31:48
(permalink)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/07 18:52:31
(permalink)
rjohnson11 Love your use of color.
Cheers Robert :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/13 22:13:51
(permalink)
Hey guys! Here are some awesome goodies from Primochill! Rigid Revolver fittings and compression reservoir with D5 mount!
Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/14 00:18:11
(permalink)
Love the color of the rigid revolver fittings and compression reservoir.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/14 00:47:37
(permalink)
rjohnson11 Love the color of the rigid revolver fittings and compression reservoir.
Cheers :D It's a good colour combo :D
|
uncle poop
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2012/01/11 09:56:18
- Location: dirty jerzey
- Status: offline
- Ribbons : 0
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/18 07:25:03
(permalink)
This is going to be a sick looking build. That motherboard is awesome looking.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] - IN WIN G1 (modded In Win 909)
2015/11/20 16:55:27
(permalink)
uncle poop This is going to be a sick looking build. That motherboard is awesome looking.
Cheers mate! Yea the motherboard is awesome :D
|