I have a brand new rig running an EVGA FTW 1070 and whenever I try to run Precision XOC it just crashes after about 15-20 seconds meaning that I can't use it.
Other OC software like MSI afterburner works fine but I'd rather use Precision out of personal preference. Has anyone else had this problem?
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 19:54:10
(permalink)
Welcome to the Forum dansixx Is your  current? Or Can you provide a little bit more information. Motherboard: E3 KRAIT GAMING V5Make: MSI Model: Bios Version: 2016-08-01 Version 1.1 Is Bios Current Yes or No. CPU: IntelModel: Intel® Xeon® Processor E3-1230 V5Settings: Memory: Make: Kingston Model: HyperX Fury HX421C14FB2K4/32 32GB (4x8GB) DDR4 Settings: Monitor: Make: Model: Video Cables Used: Type: Versions: AGE TV If Used: Make: Model: Video Cables Used: Type: Versions: AGE PSU: Make: Model: AGE: Other PCI/PCIe installed Devices: Make: Model: Slot Number Installed: Driver Version: OS: Version: Service Pack Level: Windows/Patch Level:
post edited by bcavnaugh - 2016/10/31 20:21:07
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 19:59:23
(permalink)
I've just updated my mods rigs with as much info as I have, I'm only running the default bios for everything and every component is less than a week old.
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:02:06
(permalink)
It is to hard to help you without know our Hardware and OS. Are on Window 7 or Windows 8 or Windows 10 Each OS has a different solution.
post edited by bcavnaugh - 2016/10/31 20:05:31
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:04:41
(permalink)
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:06:47
(permalink)
dansixx
Windows 10 Pro
32 Bit or 64 Bit? Is the OS Updated with all the Current Updates AND Upgrades? Is the Windows 10 anniversary update installed? All the Motherboard Chipset Software Drivers install and so on? Did you install the Video Drivers or did Windows?
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:08:02
(permalink)
The OS is completely up to date and I installed the drivers directly from NVidia
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:09:05
(permalink)
dansixx
The OS is completely up to date and I installed the drivers directly from NVidia
Any Yellow ! in your Device Manager?
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:10:57
(permalink)
When you installed EVGA Precision XOC did you run as administrator when you installed it?
Is the version of EVGA Precision XOC 6.0.8?
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:11:45
(permalink)
Nothing at all.
Also XOC does recognise my card and displays any changes I've made in afterburner, and will even let me make changes, but regardless of if I make a change or not it just "encounters an unexpected error" in less than a minute and closes itself
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:14:41
(permalink)
Not sure but I do not think you can run both tools at the same time.
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:16:15
(permalink)
I wonder if your CPU is holding it back?
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:16:38
(permalink)
I originally ran XOC by itself and when it was crashing I installed Afterburner
|
Madmaxneo
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2014/01/07 20:06:11
- Status: offline
- Ribbons : 0
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:16:39
(permalink)
The problems you are describing are common with Precision X (or whatever version). I know loads of people that now use Afterburner because it is way more stable.
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:18:07
(permalink)
Madmaxneo
The problems you are describing are common with Precision X (or whatever version). I know loads of people that now use Afterburner because it is way more stable.
Not Really
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:18:49
(permalink)
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:22:05
(permalink)
This is my CPU. It definitely supports DDR4 RAM
*edit* I cant post the link but the one linked in the post above this is the correct one
|
Re: Precision XOC Crashes after a few seconds
2016/10/31 20:23:12
(permalink)
dansixx
This is my CPU. It definitely supports DDR4 RAM
Takes a lot of work going back and forth, maybe Madmaxneo can take over
|
Re: Precision XOC Crashes after a few seconds
2016/11/01 02:47:57
(permalink)
By sheer fluke I managed to get the software to stay open (steam version, not sure if that matters as I've had the exact same problem with it in the past)... but my first overclock caused my GPU to crash instantly. But hey, at least the software worked
|
