CptSpig

DRSEnabled

ksgnow2010
You can use the existing 1070/1080 EVGA hybrid kit...keep the existing Titan X P baseplate, connect the AIO splitter to the fan header and NVIDIA fan, and mount the AIO cooling head to the GPU die.  I did this...took me about 30 minutes.
 
Not a "clean" look, but very functional...temps stay 45 C to 50 C under 115% TDP load with 28 C ambient.
 
Titan X p #2 (and EVGA 1070/1080 hybrid kit #2) come today...and I'll slap that on.
 
I'll run this until the official kit comes out.

Hi
I seen that mod and results are excellent.Standard cooler is starting to bum me out:)Seriously considering the EK predator like CptSpig.It's all money:)

I highly recommend this setup! Better cooling with a full cover water block and it also cools your CPU. EVGA looks like they are trying to do something similar with quick disconnects.
If this works good I will switch on the next GPU upgrade.

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

DRSEnabled

CptSpig

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

Yes they added this one: EK-XLC Predator 140 (incl. QDC). My one Titan is looking lonely but man it's fast!
Don't do it sli aint worth it.

CptSpig

DRSEnabled

CptSpig

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

Yes they added this one: EK-XLC Predator 140 (incl. QDC). My one Titan is looking lonely but man it's fast!
Don't do it sli aint worth it.

I had two GTX 980 KingPins in sli before the Titan X Pascal. I never had any issues with my setup. If a game was not compatible I would just turn off sli.
The sli is fun to bench mark!

CptSpig

DRSEnabled

CptSpig

DRSEnabled

CptSpig

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

Yes they added this one: EK-XLC Predator 140 (incl. QDC). My one Titan is looking lonely but man it's fast!
Don't do it sli aint worth it.
 

I had two GTX 980 KingPins in sli before the Titan X Pascal. I never had any issues with my setup. If a game was not compatible I would just turn off sli.
The sli is fun to bench mark!

I don't know about a €1250 card being fun to bench.You must have some jobSli in bf1 and gears persuaded me to give up the dream.Also micro stutter fo4Bye bye SLI.

Please post some pic's when installed. Thanks
 

ksgnow2010

CptSpig

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

Yes they added this one: EK-XLC Predator 140 (incl. QDC). My one Titan is looking lonely but man it's fast!

That's a 140 mm radiator with a CPU block.  Other than letting this "second" CPU block hang in the case, how do I add this to a 360 mm loop?

Nereus
 
Finally got around to buying Battlefield 1... and OMG on a Titan XP, amazing...!!!!
 
 

ksgnow2010

CptSpig

ksgnow2010

CptSpig

ksgnow2010
EK Predator can't cool CPU and 2 Titan GPU.
 
The AIO mod (and future EVGA kit) is temporary until I bite the bullet and build a custom loop.

Yes it can with a 140mm add on rad. Why are you wasting so much money on these kits? You could be putting the money into your custom loop.

Last I checked (about 3 weeks ago), you couldn't add on a rad without draining and refilling the loop (i.e. the "quick disconnects only went to the GPUs)...hence defeating the purpose of an AIO.  Has something changed?
 
And it's not really wasting money...I have an AIO for my CPU and both my GPUs...fits great in the front of my Corsair 740 Air case!

Yes they added this one: EK-XLC Predator 140 (incl. QDC). My one Titan is looking lonely but man it's fast!

That's a 140 mm radiator with a CPU block.  Other than letting this "second" CPU block hang in the case, how do I add this to a 360 mm loop?

Attached Image(s)

dakon
Well today my Titan X pascal arrived.  Ok, even with stock cooler, not ocd, it is silent and has so much power.  No prob for bf1 and over watch.  Still will add the hybrid and then tweak
 

Nomanor
Guys,  I am tired of waiting for an AIO kit from EVGA and want to do same thing CptSpig did. Only I'm already using a CPU Hybrid cooler from Corsair, so i need to watercool the Titan card separately.
 
I'm very new to watercooling, so please let me know if I planned this out correctly.
Are these the parts that I would need to assemble Titan watercooling:
 
1. EK Titan X Waterblock
2. EK-XLC Predator 140 Radiator+Pump 
3. EK Titan X Backplate
 
Or do I need something else? Does the pump connect right to the waterblock or do I need some kind of fittings? 
Please me know if i missed something. Any help is appreciated!
 
 
 

Nomanor
EK provide an option of pre-filling the waterblock:
 

seyumi

Nereus

Nomanor
EK provide an option of pre-filling the waterblock:
 

 
Wow.. €24.55 (~US$28) just to put fluid in it? LOL.. I guess EK know their market - figure if you'll pay $1,200 (~€1,075) for a graphics card, you'll probably pay through the nose for water cooling. I'm sticking with EVGA AIO at this point.

No you get the tubing, quick disconnect, clamps, labor, & fluid for $28. Probably includes leak check too. The quick disconnect alone is already more than that those things are expensive.