Could someone confirm that the 780 classifieds on Amazon are using Samsung vram and not whatever that other one was that everyone complains?

I have just bought this card in UK from SCAN.  I have looked EVERYWHERE I really want the backplate but it is not sold anywhere in UK.  Can anyone help?
 
~Regards Paz 

Mine both cards from EVGA are 75% ASIC.
GTX580 1536MB 75.5% and GTX780 Classified 75.9%. :(.
But people say that mean nothing, maybe some check cards with higher ASIC can't go for Classified if they really look careful.
If that mean something and if really higher ASIC is better, than under 80% is bad. 
 

thestalosj
Quick question, if I buy a classified acx, can I convert it to a hydro copper somehow later?

Yes. And, it is covered under warranty for you to remove the air cooler and switch to hydro, and then back. Just remember to hold onto yhe original air cooler and screws as those are required for warranty service.

Hello Community
I am new here and i should first apologize me for my bad english.
I bought an EVGA GEFORCE GTX 760 SC ACX 2GB GDDR5 in Germany in an Conrad store in Mainz date of Buying was 08/30/2013 and now i am noticed that when anyone buy a EVGA Graphiccard it is an gamebundle included.....and now my question: is it possible to get it(Gamebundle) here when i transmit the datas from the card here? Because i bought the card there without any game or something like this.
many thanks and greetings from Mainz/Germany
 

pathfindercod
Good news for me, the backplates did not make my temps go up like they did on my 680 classy's.
 
ALSO
 
 
Silly question... Is it ok to leave the classified cards in LN2 mode or is it best to leave them in normal mode? 

Either mode is fine. LN2 mode just gives you more headroom to overclock.

Vlada011
EVGA GTX780 Classified 560e on Caseking...
 

Finally NVIDIA is forced to drop price. Now they will lose all earning on overpriced cards and customers stay without performance.
Because NVIDIA NO REASON TO GIVE US FULL GK110. Soon GTX780 Classified SLI for Titan price.
Only on one moment imagine full GK110 (April 2013) for 1000$ and Titan specification as 780 Classified model 750$ (June 2103).
AMD R9-290X weaker than two NVIDIA high end cards or same as weaker, NVIDIA winner crown, customers MORE THAN SATISFIED not some of them feel cheated.
AMD earning again as HD7970. 

 
Try to use a better language,  mate -)

The Current stock in amazon have samsung or hynix?

mainzer1
Hello Community
I am new here and i should first apologize me for my bad english.
I bought an EVGA GEFORCE GTX 760 SC ACX 2GB GDDR5 in Germany in an Conrad store in Mainz date of Buying was 08/30/2013 and now i am noticed that when anyone buy a EVGA Graphiccard it is an gamebundle included.....and now my question: is it possible to get it(Gamebundle) here when i transmit the datas from the card here? Because i bought the card there without any game or something like this.
many thanks and greetings from Mainz/Germany
 

I think you would have to contact the retailer.

Are those shipping back with the samsung memory??

Dymblos
The Current stock in amazon have samsung or hynix?

Already slapped mine in and benching, just got it from amazon nov 1st. So far I'm very happy with it, hitting 1275mhz core/6.9 ghz on the ram,  Stock bios(the green led one), just upped my power/temp targ, typed in the offsets. Gpu-z showing 1.16 volts at 99% load, and ASIC on this board is 70.1%
Is there any way to tell besides popping the cooler off? Think this one is a beast ocer for air either way. Haven't even begun tweaking it yet really imo. So far ran tessellation+ DoF in ocscanner for bout an hour, it was reporting artifacts at 1.3ghz, but keep in mind, haven't added any juice yet. Elpida or samsung I'm very happy with the results, especially with the ram.
 

vhsownsbeta
Hopefully someone who put a block on their classy can help me; does the reinforcing plate have thermal pads for the ram AND mosfets? I am considering watercooling and wondering if I can get away with leaving the plate on for some passive cooling and putting a universal block on the GPU...

Yes it does, i sent you a pm.

Thanks.

My classy seems to clock well but I get pretty annoying resonance when fan speed is at 40-45% (which is pretty frequently). I have noticed a few other people reporting this problem. Is this likely to go away? Is it worth an RMA? Am I just as likely to get another card that does the same thing?

I am on the verge of moving into watercooling but still don't like the fact that it is doing this out of the box...

Ok, so I took the plunge and bought a 780 Classy at $579 (currently in route from Newegg) because my EVGA GTX580 1.5gb was feeling long in the tooth. I also decided to buy a Benq XL2420TE 144Hz 1080p monitor to compliment it. My biggest concern is a possible bottleneck somewhere (specifically CPU/Mobo) from the rest of my system. If you guys would be cool enough to help me, do you think that I have much to worry about?
 
CASE: Cooler Master HAF 932
PSU:  CORSAIR TX Series CMPSU-750TX 750W ATX12V v2.3
CPU: Intel Core i7-920 Bloomfield 2.66GHz
MOBO: ASUS P6T Deluxe V2
MEM: G.SKILL Sniper Gaming Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
SSD: Crucial M4 CT256M4SSD2 2.5" 256GB SATA III
HDD: Western Digital WD Black WD6401AALS 640GB 7200
OPTICAL: LG 22X DVD±R DVD Burner 22X
KEY: Logitech G510
MOUSE: Logitech G500
OS: Windows 7 64-bit Pro
 
My system is currently air cooled but I do have a "Sunbeam CR-CCTF 120 mm Core-Contact Freezer CPU Cooler" which may help with mild OC, if needed/wanted. With the new monitor, I do not have any current plans to go multiple display or even stepping up to glorious 1440p+ in the near future. My gaming interests are BF4, Skyrim (modded all to hell and back with ENB and such), Metro:LL, and upcoming games like Star Citizen, etc. Thank you for any responses and happy to be joining the 780 Classy Club!
 
- Xristo

seitan
Hey i bought 780 classified backplate and i have a question about the plastic membrane on downside of backplate which goes on the top of pcb, do i remove the membrane or is it there to prevent shorting. Thanks in advance guys.

You only need to peel off any plastic that is covering the thermal pads. The other plastic pads on the bottom of the backplate should be left on.