Hot!New BIOS 5/27/2016

Page: 12 > Showing page 1 of 2
Author
EVGATech_DaveB
EVGA Tech Support
  • Total Posts : 4716
  • Reward points : 0
  • Joined: 2008/09/26 17:03:47
  • Status: offline
  • Ribbons : 43
2016/05/27 09:38:30 (permalink)
BIOS 2.02\2.01 Updates
  • E999, E997, E995, and E095 now FULLY Supports DBW-E CPU's.
  • E097:
    • Improves BDW-E CPU OC compatibility
    • Improved memory Compatibility
    • Fixed several smaller issues
  

 
Windows Installation
  • Download the correct .zip file below for your motherboard:
         151-HE-E999-KR - EVGA X99 Classified
         150-HE-E097-KR - EVGA X99 FTW-K
         150-HE-E997-KR - EVGA X99 FTW
         131-HE-E995-KR - EVGA X99 Micro
         131-HE-E095-KR - EVGA X99 Micro2
  • First go into your BIOS and load defaults, save and exit
  • Close all open programs.
  • Go into the folder where you unzipped this package and update.bat
  • Press Y to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
  • NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
  
BIOS Installation
  • Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
  • Reboot the machine and go into the system BIOS
  • From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
  • Select the .bin file you wish to flash.
#1

34 Replies Related Threads

    bdary
    CLASSIFIED ULTRA Member
    • Total Posts : 6773
    • Reward points : 0
    • Joined: 2008/04/25 14:08:16
    • Location: Florida, USA
    • Status: online
    • Ribbons : 55
    Re: New BIOS 5/27/2016 2016/05/27 09:41:46 (permalink)
    Thanks for the update Dave...

    EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
    i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
    Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
    EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

    Firestrike >> http://www.3dmark.com/fs/9823006
    TimeSpy >> http://www.3dmark.com/spy/297131
    EVGA Affiliate Code - M1D1QH1FTU
    #2
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/05/27 09:46:09 (permalink)
    Dang, beat me to it! Saw this when looking up the BIOS revision for someone.
     
    What are DBW-E CPU's BTW? 

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #3
    bdary
    CLASSIFIED ULTRA Member
    • Total Posts : 6773
    • Reward points : 0
    • Joined: 2008/04/25 14:08:16
    • Location: Florida, USA
    • Status: online
    • Ribbons : 55
    Re: New BIOS 5/27/2016 2016/05/27 09:49:39 (permalink)
    ...Broadwell-E chips.

    EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
    i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
    Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
    EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

    Firestrike >> http://www.3dmark.com/fs/9823006
    TimeSpy >> http://www.3dmark.com/spy/297131
    EVGA Affiliate Code - M1D1QH1FTU
    #4
    EVGATech_DaveB
    EVGA Tech Support
    • Total Posts : 4716
    • Reward points : 0
    • Joined: 2008/09/26 17:03:47
    • Status: offline
    • Ribbons : 43
    Re: New BIOS 5/27/2016 2016/05/27 09:53:42 (permalink)
    The E097 has some other slight fixes, but otherwise, if you don't have a Broadwell-E, this likely will do little to nothing for you at this time.
    #5
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/05/27 09:54:10 (permalink)
    Hey, the compatibility list hasn't been updated. Specifically what Broadwell-E chips are supported?

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #6
    EVGATech_DaveB
    EVGA Tech Support
    • Total Posts : 4716
    • Reward points : 0
    • Joined: 2008/09/26 17:03:47
    • Status: offline
    • Ribbons : 43
    Re: New BIOS 5/27/2016 2016/05/27 09:55:46 (permalink)
    I know, sorry, still getting to that.  Got Broadwell and 1080 stuff today, I'll get there.
    #7
    EVGATech_DaveB
    EVGA Tech Support
    • Total Posts : 4716
    • Reward points : 0
    • Joined: 2008/09/26 17:03:47
    • Status: offline
    • Ribbons : 43
    Re: New BIOS 5/27/2016 2016/05/27 09:57:03 (permalink)
    Basically, i7 Broadwell-E's should all be fine, Xeon, I do not have a support list for yet, but I will work with engineering to get those as well.
    #8
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/05/27 10:02:52 (permalink)
    EVGATech_DaveB
    Basically, i7 Broadwell-E's should all be fine, Xeon, I do not have a support list for yet, but I will work with engineering to get those as well.




    The Xeons are what I'm salivating over, to be honest. Thank you for getting back so quickly!

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #9
    bdary
    CLASSIFIED ULTRA Member
    • Total Posts : 6773
    • Reward points : 0
    • Joined: 2008/04/25 14:08:16
    • Location: Florida, USA
    • Status: online
    • Ribbons : 55
    Re: New BIOS 5/27/2016 2016/05/27 10:04:18 (permalink)
    EVGATech_DaveB
    The E097 has some other slight fixes, but otherwise, if you don't have a Broadwell-E, this likely will do little to nothing for you at this time.


    Thanks for the info...

    EVGA X99 Classy ~ EVGA 1080 FTW ~ EVGA 970 SSC for PhysX
    i7-5930K @ 4.40GHz ~ Corsair H100i ~ 16GB G.Skill RipJaws 4 @ 2400MHz
    Samsung 840 Pro w/ W7 HP & W10 Pro 64bit (Dual Boot) ~ Samsung 840 256GB
    EVGA 1300W G2 ~ CM HafX ~ ASUS ROG Swift 144Hz Gsync ~ Acer 27" 120Hz 3D

    Firestrike >> http://www.3dmark.com/fs/9823006
    TimeSpy >> http://www.3dmark.com/spy/297131
    EVGA Affiliate Code - M1D1QH1FTU
    #10
    Erica647
    New Member
    • Total Posts : 13
    • Reward points : 0
    • Joined: 2012/04/28 19:54:06
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/05/27 13:16:38 (permalink)
    Was secure boot removed again in this update?
    #11
    EVGATech_DaveB
    EVGA Tech Support
    • Total Posts : 4716
    • Reward points : 0
    • Joined: 2008/09/26 17:03:47
    • Status: offline
    • Ribbons : 43
    Re: New BIOS 5/27/2016 2016/05/27 13:48:24 (permalink)
    Erica647
    Was secure boot removed again in this update?


    Not that I am aware of, it wasn't anywhere in the documentation I have.


    #12
    ValkyrieStar
    Superclocked Member
    • Total Posts : 165
    • Reward points : 0
    • Joined: 2016/04/08 16:30:41
    • Location: United Kingdom
    • Status: offline
    • Ribbons : 2
    Re: New BIOS 5/27/2016 2016/05/27 16:00:39 (permalink)
    EVGATech_DaveB
    Erica647
    Was secure boot removed again in this update?


    Not that I am aware of, it wasn't anywhere in the documentation I have.






    It didn't appear to be fully functional in the previous release to be fair, vs my MSI Z97 board anyhow. The standard "reset boot commands" resulted in some wierd answers instead of saying "this variable is protected by a secure boot policy" like it should.
     
    By the "reset boot commands", i mean these;
     
    bcdedit /deletevalue nointegritychecks 
    bcdedit /deletevalue loadoptions 
    bcdedit /debug off 
    bcdedit /deletevalue nx
    post edited by ValkyrieStar - 2016/05/27 16:11:21

     
    #13
    Warboy
    ACX Member
    • Total Posts : 398
    • Reward points : 0
    • Joined: 2007/05/26 23:55:08
    • Status: offline
    • Ribbons : 1
    Re: New BIOS 5/27/2016 2016/05/29 22:38:47 (permalink)
    EVGATech_DaveB
    Erica647
    Was secure boot removed again in this update?


    Not that I am aware of, it wasn't anywhere in the documentation I have.




    It does appear to be removed.
    post edited by Warboy - 2016/05/29 23:06:08


    My Rig can do EpicFLOPs, Can yours?
    Once this baby hits 88 GigaFLOPs, You're going to see some serious $@#%....

    #14
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/05/31 19:41:28 (permalink)
    Is Turbo Boost Max 3.0 supported by this BIOS update?
     
    I also noticed that no Broadwell-E Xeons were added to the support list - were there plans to post those as well?

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #15
    Mikan02
    New Member
    • Total Posts : 5
    • Reward points : 0
    • Joined: 2015/09/05 01:24:22
    • Status: offline
    • Ribbons : 1
    Re: New BIOS 5/27/2016 2016/05/31 20:30:39 (permalink)
    Hi,
    did Adaptive OC change on this bios update? 
    On 1.20 when i set to Adaptive, the voltage adjustment for Override(Static) got reset to 0.0,
    I guessed that meant it used default voltage and the Adaptive voltage got added if needed.
    Now Override just stays at 1.0 and voltage increase by 0.02 on CPU and not sure how much on uncore/ring :>
    Is this intended? I can adapt settings if so, just wondering. ^^
    Board is 151-HE-E999, CPU 5960x 4.6/3.6, G.Skill Memory 3200. Testing cause possible CPU upgrade soon.
    #16
    maxinfo
    New Member
    • Total Posts : 6
    • Reward points : 0
    • Joined: 2010/10/03 07:54:12
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/05/31 20:35:18 (permalink)
    I ordered a 6850k for the new x99 I aquired. Just sent an email over to support for a bios chip for the board as I have no older 2011 chips to boot and flash the bios on the board. Hopefully they can send that out soonish.

     
     
    Intel i7-4770k @ 4.7 | MSI Z87-GD65 Gaming | G.SKILL Sniper 1866 16GB (2x8) @ 1960 | 2x Crucial M4 128GB (Raid 0) | 2x Crucial MX100 512GB (Raid 0) | LG BDXL Burner | 2x EVGA GeForce GTX 970 FTW in SLI | Fractal Designs Arc Midi R2 | Corsair H110 Push/Pull | Cooler Master V850 | 2x Noctua NF-A14 | NZXT Hue |
     LG 34UM95 34" 21:9 & ASUS PB278Q 27" on EasyMountLCD Desk Clamp Triple Monitor Stand
    #17
    JacksonKUO
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2016/06/01 01:43:32
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/01 01:52:41 (permalink)
    This version work with Xeon E5 2630 v4 on my X99 Micro (131-HE-E995-KR). I setup cpu ratio in bios and saw overclock frequency in bios but didn't work in OS. Only 2.4Ghz max for 100% loading.
     
    I found that in google "All the haswell-ep/2011-3 Xeons have the multiplier locked. Sadly, the Sandy Bridge-EP wer the last of a kind."
    Forget overclock on Xeon.
     


    post edited by JacksonKUO - 2016/06/01 02:02:54
    #18
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/06/01 05:49:38 (permalink)
    The only Sandy Bridge Xeons that were multiplier unlocked, to my knowledge, were the E5 16XX series - the same has been true for the V2 and the V3 series. For certain the V4 26XX, 46XX, and 8XXX series are also multiplier locked - the 16XX V4s aren't out yet, but they should hopefully be multiplier unlocked same as the V1, V2, and V3 series.

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #19
    Mikan02
    New Member
    • Total Posts : 5
    • Reward points : 0
    • Joined: 2015/09/05 01:24:22
    • Status: offline
    • Ribbons : 1
    Re: New BIOS 5/27/2016 2016/06/02 14:58:38 (permalink)
    6950x confirmed on the way in 6 days, should have it in 8 days :D
    Still would like to know if adaptive works like intended on 2.02, since it is different from 1.20?
    Mentioned it in previous post above.
    Would be nice to know before change, that everything is like it should be. :>
    #20
    ValkyrieStar
    Superclocked Member
    • Total Posts : 165
    • Reward points : 0
    • Joined: 2016/04/08 16:30:41
    • Location: United Kingdom
    • Status: offline
    • Ribbons : 2
    Re: New BIOS 5/27/2016 2016/06/04 05:57:47 (permalink)
    Mikan02
    6950x confirmed on the way in 6 days, should have it in 8 days :D
    Still would like to know if adaptive works like intended on 2.02, since it is different from 1.20?
    Mentioned it in previous post above.
    Would be nice to know before change, that everything is like it should be. :>




    Hehe, i'll be picking up one of those in a few months, when you get it you mind just a 4.0GHz test and seeing how much power it uses on Prime95 v28.9? And what its temps are like? Would be great thanks i'm planning an air build with one of those beasts at just a 4ghz clock, nothing super spectacular on the OC side of things but its 10 cores :D

     
    #21
    kmarch
    New Member
    • Total Posts : 70
    • Reward points : 0
    • Joined: 2009/02/18 19:02:30
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/06 12:35:38 (permalink)
    arestavo
    Is Turbo Boost Max 3.0 supported by this BIOS update?
     
    I also noticed that no Broadwell-E Xeons were added to the support list - were there plans to post those as well?


    Yes Turbo Boost max 3.0 is working with this bios. Had to go searching for the driver for windows 10.
    #22
    Ravenmaster
    SSC Member
    • Total Posts : 510
    • Reward points : 0
    • Joined: 2008/10/24 18:02:00
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/07 02:11:24 (permalink)
    Everything running nice and smoothly on my X99 FTW-K 

    EVGA X99 FTW-K  mobo | Core i7 6850K | 2x EVGA GTX 1080's SLI  | 32GB DDR4 RAM Kingston HyperX | Sony Blu Ray Player | 2x Crucial M4 512GB SSD's | 2x Samsung Evo 850 1TB SSD's in RAID 0 (main boot drive) | Creative SB ZXR | Logitech Z-906 5.1 speakers | Asus ROG wift 27" 144hz G-sync monitor @ 1440p 

    #23
    Tiffo60
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2015/06/12 07:50:18
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/07 13:49:09 (permalink)
    I successfully loaded xmp profile 1 with out crashing on this new bios so Id say its a winner!

    Thermaltake Core X9
    Evga X99
    I7-5930K
    Evga GTX 980SC 
    Corsair Dominator Platinum C15 32Gb 3000mhz 
    EVGA SuperNova 1600 P2


    #24
    efilloon
    New Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 2008/04/16 17:32:54
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/08 11:44:19 (permalink)
    EVGATech_DaveB,
     
    I have the x99 classified MB, does this BIOS update do anything for my Motherboard?
     
    Thanks,
    Eric

    EVGA X99 Classified
    Intel 5930 4.329GHz (watercooled - Ek-Supremacy EV0 - (Original CSQ) Full Nickel)
    32Gb Corsair Platinum Dominator 2800MHz
    2 EVGA 980 Classified's (EK WBs)
    512 Gb Samsung 850 Pro
    Corsair 1000HX PSU
    Corsair K70 Cherry MX Red RGB Mechanical Gaming Keyboard
    Logitech G502 Proteus Spectrum
    Sound Blaster Z PCIe Gaming Sound Card
    Windows 10 Pro 64 bit
    #25
    arestavo
    CLASSIFIED Member
    • Total Posts : 3005
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 8
    Re: New BIOS 5/27/2016 2016/06/08 11:47:00 (permalink)
    efilloon
    EVGATech_DaveB,
     
    I have the x99 classified MB, does this BIOS update do anything for my Motherboard?
     
    Thanks,
    Eric


    It adds Broadwell-E compatibility as well as slight memory compatibility improvements, and other small fixes, for the X99 Classified, FTW, and Micro 1/2. For the FTW K it just added Broadwell-E compatibility supposedly.

    Edit: and there have been reports that the 2.02 update broke Secure Boot.
    post edited by arestavo - 2016/06/08 11:51:44

    EVGA affiliate code: 9ZWDWFNW6A
    (Don't forget to upload your invoice or no credit is given!)
     
    FOLD ON

    #26
    enkrypt3d
    New Member
    • Total Posts : 93
    • Reward points : 0
    • Joined: 2005/09/08 20:26:16
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/06/15 13:57:56 (permalink)
    Are we able to disable the splash screen on this bios yet?
     
    What about fixing this issue:
     
    http://forums.evga.com/tm.aspx?m=2400517
     
    Thanks!
    #27
    bcavnaugh
    Insert Custom Title Here
    • Total Posts : 15097
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: Colorado Affiliate Code: E5L3CTGE12
    • Status: online
    • Ribbons : 68
    Re: New BIOS 5/27/2016 2016/06/15 15:40:43 (permalink)
    Note that on the X99 Classified MB Bios 2.02 required me to reactivate Windows 7 x64 with Microsoft.

    Dark Titan   The AIO Hybrid   X99GTX980Cruncher   2P  4P   E5L3CTGE12  My HFM

     The Number One Team in the Folding @ Home Community
    #28
    ValkyrieStar
    Superclocked Member
    • Total Posts : 165
    • Reward points : 0
    • Joined: 2016/04/08 16:30:41
    • Location: United Kingdom
    • Status: offline
    • Ribbons : 2
    Re: New BIOS 5/27/2016 2016/06/15 18:50:54 (permalink)
    enkrypt3d
    Are we able to disable the splash screen on this bios yet?
     
    What about fixing this issue:
     
    http://forums.evga.com/tm.aspx?m=2400517
     
    Thanks!


    You can modify the splash image with the AMI ChangeLogo v5 tool, i dont know about disabling it. I guess you could replace it with a solid black image.

     
    #29
    ORCACommander
    New Member
    • Total Posts : 24
    • Reward points : 0
    • Joined: 2015/10/08 19:06:31
    • Status: offline
    • Ribbons : 0
    Re: New BIOS 5/27/2016 2016/07/05 11:36:23 (permalink)
    "Fixed several smaller issues"
     
    I hate it when patch notes are vague like that.  If a variable was changed from float to an int in source code file 37 line 83 I want to know about it :P
    #30
    Page: 12 > Showing page 1 of 2
    Jump to:
  • Back to Mobile