EVGA

Help me troubleshoot SR2 error code

Author
Post
Essentials Only Full Version
juanP
iCX Member
  • Total Posts : 381
  • Reward points : 0
  • Joined: 2010/04/28 19:57:50
  • Status: offline
  • Ribbons : 3
2010/10/08 09:30:29 (permalink)
So after around 10 hours of folding my rig went down today. Every time i restart it it gets stuck on FF post code. If i reset bios and start with default settings computer boots up fine.
 
if i change any one of the setups like for vcore or vtt or ioh or even try 175 bclk i get the same error code every single time.
 
how do i go abt troubleshooting this?

juanP                   

#1

5 Replies Related Threads
    KONAn
    iCX Member
    • Total Posts : 336
    • Reward points : 0
    • Joined: 2009/04/05 11:44:46
    • Location: Gdansk, Poland
    • Status: offline
    • Ribbons : 3
    Re:Help me troubleshoot SR2 error code 2010/10/08 09:58:56 (permalink)
    you have switch on the right bottom of your board...switch to another bios and see if it helps.

    EVGA SR-2
    Dual Xeon E5620@3.8 GHz (19*200BCLK) Vcore: 1.33V, Vtt: 1.35V, IOH: 1.4V 
    48GB (12x4GB) Kingston KVR1333D3N9K2/8G @1200MHZ 1.5V@1.6V 7-7-7-20-2T 
    Corsair AX1200, EVGA GTX 285, LSi 9260 8i, Obsidian 700D
    CPU/GPU/MB watercooled    .
    #2
    chillernr1
    SSC Member
    • Total Posts : 652
    • Reward points : 0
    • Joined: 2007/01/17 07:49:04
    • Status: offline
    • Ribbons : 6
    Re:Help me troubleshoot SR2 error code 2010/10/08 10:10:20 (permalink)
    hhhmmm, i had that one time with a E759, and i did go RMA

       
     http://g.bf3stats.com/pc/5cqF0wnt/Chiller2.png
     
    #3
    _ShannonR
    iCX Member
    • Total Posts : 438
    • Reward points : 0
    • Joined: 2009/04/16 17:47:03
    • Status: offline
    • Ribbons : 2
    Re:Help me troubleshoot SR2 error code 2010/10/08 10:38:50 (permalink)
    juanP

    So after around 10 hours of folding my rig went down today. Every time i restart it it gets stuck on FF post code. If i reset bios and start with default settings computer boots up fine.

    if i change any one of the setups like for vcore or vtt or ioh or even try 175 bclk i get the same error code every single time.

    how do i go abt troubleshooting this?


    JuanP,
     
    Can you please try the Bios switch on the lower edge of the board to see if the issue occurs on one of the other bios chips?  If it does then your bios may have suffered from low level corruption which can be easily remedied with flashing of that bios chip.
     
    Please feel free to contact me at srobb@evga.com  and I will be happy to help you with any further steps if you are still having issues

    ASUS Rampage IV Black Edition
    3 Way TITAN Blacks
    TPX-1475 PSU
    LSI SSD RAID
    4960X 5.0GHz on Water
    64GB Patriot Viper 2400

    Overclocking Graveyard
    Too many new chips to list.....980X I forget how high LN2,W3580 5.7 GHz 1.79V on LN2, W3520 4.9GHz 1.57V on LN2, E8600  5.9Ghz 1.68V on Dice, E8400  5.5Ghz 1.68V on Dice, Q6600  4.7Ghz 1.52V on Dice, Cel 430 4.2Ghz 1.62V on Dice
    #4
    juanP
    iCX Member
    • Total Posts : 381
    • Reward points : 0
    • Joined: 2010/04/28 19:57:50
    • Status: offline
    • Ribbons : 3
    Re:Help me troubleshoot SR2 error code 2010/10/08 11:26:42 (permalink)
    thanks everybody. i will try the bios switch option tonight.

    juanP                   

    #5
    juanP
    iCX Member
    • Total Posts : 381
    • Reward points : 0
    • Joined: 2010/04/28 19:57:50
    • Status: offline
    • Ribbons : 3
    Re:Help me troubleshoot SR2 error code 2010/10/08 19:41:59 (permalink)
    ok did some reading on multiple forums its seems lot of people have got stuck with the FF code. there are multiple solutions provided but none worked for me.
    so i tried switching to other two bios but got stuck on 2A code. i used to get that in my current bios and the only way i could get around it was install a diff card then update my bios before i could use my HD 5970 card.
     
    since i don't have the spare card anymore the last option option i could think of was reinstalling the bios. after doing that it seems everything is working fine as before.
     

    juanP                   

    #6
    Jump to:
  • Back to Mobile