Hello, first post. 790i questions.

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
Medicine Man
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2011/07/13 05:41:14
  • Status: offline
  • Ribbons : 0
Re:Hello, first post. 790i questions. 2011/07/25 15:29:14 (permalink)
So far I am down to 1.28750v on the core running for 2 hours with no errors.
Temp @ 45*c while running.
Gonna keep going until as VistaHead suggested if fails.

Building:
Mobo - EVGA 790i [P/N - 132-CK-NF79-TR]
CPU - Intel Q9650 [HeatSink - Thermalright Venomous]
RAM - G.Skill Sniper 8GB (2x4GB) 240 pin DDR3 1600 (PC3 12800) Model # F3-12800CL9D-8GBSR [CAS Lat - 9, Timing 9-9-9-24, Voltage - 1.5v, ECC - No.]
GRPX - Galaxy GTX560Ti
PSU - PC Power & Cooling 750W
Case - Antec 900
OS - Win 7 Ultra 64bit
#31
VistaHead
Omnipotent Enthusiast
  • Total Posts : 9368
  • Reward points : 0
  • Joined: 2009/02/17 18:42:22
  • Status: offline
  • Ribbons : 131
Re:Hello, first post. 790i questions. 2011/07/26 04:44:39 (permalink)
^^^Good stuff!!  Let us know the lowest stable voltage that you stop at.
#32
Medicine Man
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2011/07/13 05:41:14
  • Status: offline
  • Ribbons : 0
Re:Hello, first post. 790i questions. 2011/07/31 06:11:58 (permalink)
Hey gang.
Down to 1.18750v. Its taking a while because I am letting the stress test run for as long as possible. And back and fourth to class.
So far that Voltage ran for 10+ hours last night, temps were at idle 28*, load 42-43*, 0 Errors. The test previous was 1.19375v, temps 28* idle, and 50* load, 5+ hours.
I can only guess eventually it was say enough is enough and throw and error.Also, anyone know about the stress test Everest has? Is it any good, worthless or fair? I just found it this morning while bumping around the GUI.

Building:
Mobo - EVGA 790i [P/N - 132-CK-NF79-TR]
CPU - Intel Q9650 [HeatSink - Thermalright Venomous]
RAM - G.Skill Sniper 8GB (2x4GB) 240 pin DDR3 1600 (PC3 12800) Model # F3-12800CL9D-8GBSR [CAS Lat - 9, Timing 9-9-9-24, Voltage - 1.5v, ECC - No.]
GRPX - Galaxy GTX560Ti
PSU - PC Power & Cooling 750W
Case - Antec 900
OS - Win 7 Ultra 64bit
#33
Medicine Man
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2011/07/13 05:41:14
  • Status: offline
  • Ribbons : 0
Re:Hello, first post. 790i questions. 2011/08/04 09:46:54 (permalink)
Hey gang!
OK. the Last stable voltage is 1.17500, the failures it was doing were computer reboots and BSOD. The Temps were really low 31* idle and 40*load.
I hope this helps someone in the future.
 
Thanks again to the guys who helped out. I very much appreciate it!

Building:
Mobo - EVGA 790i [P/N - 132-CK-NF79-TR]
CPU - Intel Q9650 [HeatSink - Thermalright Venomous]
RAM - G.Skill Sniper 8GB (2x4GB) 240 pin DDR3 1600 (PC3 12800) Model # F3-12800CL9D-8GBSR [CAS Lat - 9, Timing 9-9-9-24, Voltage - 1.5v, ECC - No.]
GRPX - Galaxy GTX560Ti
PSU - PC Power & Cooling 750W
Case - Antec 900
OS - Win 7 Ultra 64bit
#34
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile