Hey hallowen, if you are still looking for some evbots lemme know. i have 2 sitting around that i got for my E762 a while back and used like twice. 
 
you will have to program them to what you need of course but they are yours if you want them. :)
 
im moveing toward Asus when i get my stuff up and running again. i had all of last year with a new hobby (RC racing: http://www.youtube.com/watch?v=PF9UgxTvwcY ) my car was the black one with orange flames. 
 
so yeah if you want them they are yours, have most of the cables still :)

Not bad for fairly minimal adjustments.  What is your VCore at?  What are you cooling the CPU with atm?

Yeah, 1.5 is a bit high.  I would be curious to see what your temps are on a more difficult CPU test.  But if all you are doing is 3dMark based tests, Vantage/11/Firestrike, it may be irrelevant.  But those Megahalems are pretty hefty coolers, not gonna touch your chiller though.  Can't wait to see this rig getting pushed higher.

 

 

 

hey boys.......Its been a while since I had a look over here...... good to see all the oldies still going strong...... happy benching

LOL..... all the same mate.... can not stop benching...... how bout your self? 

SniperOZ
hey boys.......Its been a while since I had a look over here...... good to see all the oldies still going strong...... happy benching

Thanks, Been a few Years since I've started OC'ing again! LOL!

OMG THE CREW IS ALMOST BACK TOGETHER!?!  awesome!!  Welcome back sniper!! 

Nice runs Hallow!  That's about right on air cooling.  The KPE's don't "feel" like they OC well, but in reality are very good!!!  See how your real clock is 1306, when gpuz shows 1176!  Precision is accurate.
 
You can do 1.5v on the cpu on air.  It won't hurt it.  
 
What voltage on the Video Memory?  I got mine past 2000(4000) with not too much trouble.
 

Yep, nice runs Hallowen.
Those could also be spike temps where it shoots up for a second then starts to lower temps.
And you should be able to use far less than 1.56V with the rive more like 1.4 to maybe 1.45V
 
Edit:

johnksss
Looking good Hallowen. I see it's starting to come back to you now.

Thanks, It may be coming back to me, But This ASUS UEFI Still has me "Experimenting" with more options than I did with My EVGA MB's!  

You Know......I Think I may be having some Problems with My Old Thermaltake Toughpower 1200W PSU, because NOW Every time I try to go a little higher than I have been on the Vbios or CPU Voltage or the CPU Bclk, The Whole System just SHUTS OFF (Not Crashes), even when I am just in the Desktop and Haven't even made any adjustments on Precision X or the Classy Voltage Tool!
 
Could High Oc's on the Two KPE's and 4930K be using THAT Much Power and causing the PSU to Shut Off?
 
EDIT:
I Just looked on my Newegg UPS Tracking for the Rosewill Hercules 1600W PSU, and it is "Out For Delivery" Here, So I Guess I will know Soon if it IS the Old PSU after I hook up the Rosewill to operate just the Graphics Cards and use the Thermaltake for only the CPU/MB! 

The UPS Truck FINALLY Delivered My Rosewill Hercules 1600W PSU at 8:00PM (EST)!
 
I am Pretty Confident that This PSU has DEFINITELY Enough Power to handle JUST the Four OC'd EVGA GTX 780 Ti KPE's, While My Thermaltake Toughpower 1200W Should Easily be able to Handle the OC'd 4930K and ASUS RIV BE.
 
It is Quite a Beast!
 

 
 
 
 
 
 
 
 
 

 

You guys ever have a set of OC's that seems solid... finishes benches well etc, then crashes RIGHT BEFORE you can take a screenshot? I've been finetuning for 6 hours trying to make this BSOD go away... And without fail every time I think it's gone and I do a successful run of vantage... BSOD right before I take a shot of it.
 
 
Been hitting at just below 34k the whole time, 3820@4.9GHz, 580@1040/2300MHz.