That's one thing I could never understand about HWbot....They must have servers over there that run 50mhz procs....everything takes so long.

i concur!! that database be killing me at times! and i was on there like 8 hours a day..hahaha

mean-mugging.... um...  what does that mean?  You are not the first person I have heard that from, actually the second. 

aaahhhh.  Sounds like a southern 'thang'  :P
Got some eye candy if anyone knows what they are looking at here:

 
The head is on the left, weighs about 40lbs, just resting on a 2x6 chunk of wood.  There will be a support cable going straight up to the pulley, across to the other pulley, and down to the solid 4x5" 30lbs chunk of steel sliding along a ghetto rail.  Z axis almost complete.  Some welding to do. 

Well I got it stable with 191 blk. I will post a pic as soon as I get back home have to go pick up the wife. 
 
 
I used these setting
 
Mother Board ( EVGA X58 Classified E-760 )                                                        
Bios ( S61J )                                                                                                      
CPU ( 960 DO)
CPU Cooler ( Cooler Express Phase Change ) 
Memory ( Corsair Dominator GT 1600 7 7 7 20 ) 
PSU ( Thermaltake 1000w) 
GPU ( EVGA GTX 580 Black Ops) 
Drivers ( 263.09 )                                                                                                   
Operating System ( Windows 7  x64 Ultimate ) 

Frequency Control 
CPU Clock Ratio ( 25x )                                                                                       
CPU Host Frequency (Mhz) ( 191 )                                                                       
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( Auto )                                                 
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 105 )

Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1066 / 2:8 )                                                                 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 7 ) 
tRCD Setting ( 7 ) 
tRP Setting ( 7 ) 
tRAS Setting ( 20 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1T ) 

Voltage Control 
EVGA VDroop Control ( WITHOUT VDroop ) 
CPU VCore ( 1.61v )                                                                                                                                                                               CPU VTT Voltage ( +200mv ) 
CPU PLL VCore ( Auto ) 
**IOH PLL VCore ( Auto )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( Auto) (+0mV) 
QPI PLL VCore ( Auto ) 
IOH VCore ( Auto ) 
IOH/ICH I/O Voltage ( Auto ) 
ICH VCore (1.100)
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Less ) 

CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recovery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 128  ) 
  
Power Management Setup 
ACPI Suspend Type ( S3 )    
HPET Support ( Enabled )      
HPET Mode ( 64-bit )  
 
 

DENTNU

Hey nateman what ever happened to hallowen ? Its been a very long time since I have seen him post anything. I also just started to give 191 blk another shot see if I can get it stable.  Nice pic you got there wish I knew what it is.

looking good!

nateman_doo

aaahhhh.  Sounds like a southern 'thang'  :P
Got some eye candy if anyone knows what they are looking at here:


The head is on the left, weighs about 40lbs, just resting on a 2x6 chunk of wood.  There will be a support cable going straight up to the pulley, across to the other pulley, and down to the solid 4x5" 30lbs chunk of steel sliding along a ghetto rail.  Z axis almost complete.  Some welding to do. 

here ya go...
http://www.urbandictionary.com/define.php?term=mean%20muggin&defid=15747

Adam2013
Custom CNC machine I think 

100% CORRECT!  I cannot begin to tell you guys what a monumental undertaking this has been NOT having a mechanical engineering degree or any prior experience. 

nateman_doo

DENTNU

Hey nateman what ever happened to hallowen ? Its been a very long time since I have seen him post anything. I also just started to give 191 blk another shot see if I can get it stable.  Nice pic you got there wish I knew what it is.

Couldn't tell ya.  I haven't even seen him sign in and read this thread.  I wouldn't wanna sift through 240 pages here either ;)
maybe we should PM him!?

Or you can email him. 

nope, made everything from scratch ;) 
 
I did PM hallow, but haven't heard back as of yet.

DENTNU

nateman_doo

nope, made everything from scratch ;) 

I did PM hallow, but haven't heard back as of yet.

Cool nate let us know if you here from him.  

+1 

 
 
Almost 5.9 ghz and 1.9 volts... YIKES!!!  Guess I have been out of the loop for a while ;)
 
Looks like things have got a lot colder around here!!!
 

Q56_Monster

I was about to let the nitrogen gas out of my tank, and liquid shot out, lol!  Looks like I had about 5L left over from Tuesday, so I benched a few 2d tests tonight.  ( I hate 2d)  But added a few boints anyway.



 

LOL
I bought CBGPCS's 1 hp dual evaporator head phase but it arrived damaged and the local HVAC guy who was going to fix it for me has not called me back and I lost his number... so I need to track him down.
 
But even if I did get it back... guess I'll have to get some pots to hang with you guys now!

damn oc333!! really? 633 on the cpu huh...no way to keep it???
and what happen to your phase? same thing that happen to mine when it got here. broke! my flex line was broken..i ended up buying a whole new one from runmc. now after 4 months...it's got a leak in the condenser. so now im looking for a replacement. and my hvac guy is on it! so im cool on repairs now.

johnksss
now after 4 months...it's got a leak in the condenser.

braze it?

so it can't be brazed? or your not familiar with brazing?