Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/01/29 20:00:44
(permalink)
nateman_doo
I feel so accomplished. I just got a 45.2K. Is that sad?
830/1210 @ 1225mV
voltage...you know what to do, but it appears your card does not? Might take a while to dial it in.
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 20:05:33
(permalink)
now after an error, I get nothing but the yellow light. No FF, no nothing...
|
Re:Get It Colder......2
2010/01/29 20:22:43
(permalink)
your gonna have to take the cpu out and check for water. water around the cpu socket..
once reseated, it should come back on.
this is after you try all your ideas first.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.  
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 20:28:02
(permalink)
i just changed a bios setting, (southbridge i think)... and rebooted to take effect, and it didn't boot up again. you think condensation?? its below 20% humidity and the ambient temp of my room is 55°F? my conditions do not even exist on the dew point charts... condensation should be non-existent.
there is no frost on any connections.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/01/29 20:29:31
(permalink)
Sorry Nate. You shouldn't have a problem with condensation with this cold weather. Does it turn on?
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 20:50:02
(permalink)
yea, just gives yellow light on the ECP. nothing else. I reset bios, and took the battery out. nothing still.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 22:12:48
(permalink)
in a few minutes, I think I will be calling this board Lazarus.... (i hope)
|
Re:Get It Colder......2
2010/01/29 22:21:54
(permalink)
even in cold weather you can get condensation...why?...because if your not heating the system up it just sits there getting colder and not really doing any heat dissipation...speculation of course
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 22:32:18
(permalink)
condensation forms when object is colder then the air around it, and the relative humidity is high. For example:
in a 75°F room, if your waterblock is 70°F with relative humidity is 80% you will start to get condensation.
in a 55°F room, with relative humidity of 20%, my block temp can be... well that is not on the chart because 40% humidity allows the block to be 32°F (freezing point)
|
Re:Get It Colder......2
2010/01/29 22:36:41
(permalink)
all good, forget i said anything.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/29 23:33:56
(permalink)
Back from the dead... AGAIN! Lazarus rises!
THIRD time I brought it back from the dead!
|
hellshealer
SSC Member
- Total Posts : 906
- Reward points : 0
- Joined: 2009/10/20 20:48:21
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2010/01/30 07:03:32
(permalink)
nicely done nate..... nicely done...... can any1 give me tha page on HWbot for OCing a E2140???? ima try and set a record for it :) or make sparks fly out of it.. what ever comes first lmao
mah rig: HAF X i7 980X @4.3 (143x30) H70 eVGA X58 4-way SLI Classified 6gb kingston hyperX 1436mhz@ 8-8-8-88-1T Vraptor 150gb OS installed win 7 WD black 1tb storage eVGA GTX470 2 way SLI evga GT430 (second monitor) Antec 1200watt true power
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/01/30 09:16:08
(permalink)
hehe make em fly, theres no certain page just sign up and whatever bench you choose to do make sure to enter the cpu model and it sorts it out for you.
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/01/30 09:55:03
(permalink)
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/01/30 10:41:12
(permalink)
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/01/30 10:57:47
(permalink)
for -192°C cooled Clarkdale
now thats cold
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/30 11:07:44
(permalink)
http://www.hwbot.org/arti...presents_pci_maximizer can someone tell me what the hell this thing is? I read it a few times, and I till can't figure it out. "I came across this nifty solution for one of the biggest problems of the PCMark05-benchmarker. TiN, the Ukrainian overclocker and hardware modification master who has been featured on the HWBOT front page more than once in the last couple of months, posted his solution for the need of PCI lane power when using a series of GIGABYTE i-Ram modules."
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/01/30 12:46:56
(permalink)
nateman_doo
http://www.hwbot.org/article/news/tin_presents_pci_maximizer
can someone tell me what the hell this thing is? I read it a few times, and I till can't figure it out.
"I came across this nifty solution for one of the biggest problems of the PCMark05-benchmarker. TiN, the Ukrainian overclocker and hardware modification master who has been featured on the HWBOT front page more than once in the last couple of months, posted his solution for the need of PCI lane power when using a series of GIGABYTE i-Ram modules."
Yea, me too. I have no idea what it is even after reading the article multiple times, and i am intrigued by it.
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/01/30 14:45:57
(permalink)
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/01/30 14:58:15
(permalink)
and the point of that is just to make more ram for the board?
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/01/30 15:03:42
(permalink)
nateman_doo
and the point of that is just to make more ram for the board?
No, it's a cheap way of having a high speed SSD in a way. PCIE 2.2 compliant at that.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Re:Get It Colder......2
2010/01/30 15:09:13
(permalink)
nateman_doo
http://www.hwbot.org/arti...presents_pci_maximizer
can someone tell me what the hell this thing is? I read it a few times, and I till can't figure it out.
"I came across this nifty solution for one of the biggest problems of the PCMark05-benchmarker. TiN, the Ukrainian overclocker and hardware modification master who has been featured on the HWBOT front page more than once in the last couple of months, posted his solution for the need of PCI lane power when using a series of GIGABYTE i-Ram modules."
http://kingpincooling.com..um/showthread.php?t=471
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11924
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: online
- Ribbons : 98
Re:Get It Colder......2
2010/01/30 15:24:17
(permalink)
johnksss
nateman_doo
http://www.hwbot.org/article/news/tin_presents_pci_maximizer
can someone tell me what the hell this thing is? I read it a few times, and I till can't figure it out.
"I came across this nifty solution for one of the biggest problems of the PCMark05-benchmarker. TiN, the Ukrainian overclocker and hardware modification master who has been featured on the HWBOT front page more than once in the last couple of months, posted his solution for the need of PCI lane power when using a series of GIGABYTE i-Ram modules."
http://kingpincooling.com/forum/showthread.php?t=471
I still don't understand. He cut up a motherboard in order to get ahold of the PCI slots and that portion of the PCB. Now, does this mean that the I-RAM drive does not need to communicate through the PCI slots but only needs the PCI slots for power and communicates with the computer VIA another cable connected to the I-RAM cards themselves? Or did he just cut one up as a dummy test piece before doing the real deal to a working motherboard?
|
Re:Get It Colder......2
2010/01/30 15:27:35
(permalink)
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11924
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: online
- Ribbons : 98
Re:Get It Colder......2
2010/01/30 15:33:08
(permalink)
So... I still must ask you, how does it communicate with the computer? SATA cable? The picture only confirms my puzzle but does nothing to answer.
And why not just use a PCI slot on the motherboard? Due to space limitations and lack of PCI slots?
Lastly, why not solder the power wires directly onto the I-RAM card instead of trashing a motherboard for its PCI slots?
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/01/30 15:35:04
(permalink)
ty_ger07
johnksss
nateman_doo
http://www.hwbot.org/article/news/tin_presents_pci_maximizer
can someone tell me what the hell this thing is? I read it a few times, and I till can't figure it out.
"I came across this nifty solution for one of the biggest problems of the PCMark05-benchmarker. TiN, the Ukrainian overclocker and hardware modification master who has been featured on the HWBOT front page more than once in the last couple of months, posted his solution for the need of PCI lane power when using a series of GIGABYTE i-Ram modules."
http://kingpincooling.com/forum/showthread.php?t=471
I still don't understand. He cut up a motherboard in order to get ahold of the PCI slots and that portion of the PCB. Now, does this mean that the I-RAM drive does not need to communicate through the PCI slots but only needs the PCI slots for power and communicates with the computer VIA another cable connected to the I-RAM cards themselves?
Or did he just cut one up as a dummy test piece before doing the real deal to a working motherboard?
After looking over, I see no way of card being able to communicate with main board. As it sits he is merely providing power to all slot via that sata power connector and nothing else. I'm sure he'll come up with a line to be abble to do data transfer. Right now tho it's just another piece of duct tape hardware. 
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Re:Get It Colder......2
2010/01/30 15:51:02
(permalink)
 this one seems to have a sata port...would that be how they transfer the data..or is that wishful thinking? the more expensive version... http://www.fusionio.com/products/
post edited by johnksss - 2010/01/30 15:55:25
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/01/30 16:15:50
(permalink)
pretty sure you transfer data via the iram itself  you just need to power the pcb and you can boot right from this thing
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11924
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: online
- Ribbons : 98
Re:Get It Colder......2
2010/01/30 16:20:15
(permalink)
johnksss
this one seems to have a sata port...would that be how they transfer the data..or is that wishful thinking?
the more expensive version...
http://www.fusionio.com/products/
I saw that SATA port on there and was thinking the same thing. But without intimate knowledge of that thing, who knows if that SATA port is for data transfer to the motherboard or if it is only a way of adding a hard disk or SDD drive to the I-RAM array. You would think it would be much easier to just solder the power wire to the I-RAM card iself instead of going through the hassle he did.
|
hellshealer
SSC Member
- Total Posts : 906
- Reward points : 0
- Joined: 2009/10/20 20:48:21
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2010/01/30 16:54:30
(permalink)
well it seems that i have alot of work ahead of me for my old E2140.....they are getting 4.3GHZ on LN2 with it....... all i have atm is a H50 in a bucket of ice..... (my cheep chilled water rig FTW?) but im working on it :P
mah rig: HAF X i7 980X @4.3 (143x30) H70 eVGA X58 4-way SLI Classified 6gb kingston hyperX 1436mhz@ 8-8-8-88-1T Vraptor 150gb OS installed win 7 WD black 1tb storage eVGA GTX470 2 way SLI evga GT430 (second monitor) Antec 1200watt true power
|
