When the 750Ti's came out I snagged a couple and modded the bios with kepler bios mod tool. Worked well with evga FTW models. Could adj watts but could do nothing as far as voltage.

I'll pass.
We came out with mods for the 680m/780m/880m and he gave no credit as to where he got his working mods from.

Alright, I have Finally got the Four EVGA GTX 980 ACX 2.0 Cards installed in 4-Way SLI and Here is the First 3DMark Fire Strike Extreme Bench with the Cards at stock settings and the 4960X at a 46X multiplier with the Memory running at default (2400MHz).
 
Unfortunately the Futuremark results are not Valid because they have not OK'd the 344.48 drivers as of Yet, But Who Cares!
 
At This point, I'm just happy to get everything back together and working once again!
 

hallowen
Alright, I have Finally got the Four EVGA GTX 980 ACX 2.0 Cards installed in 4-Way SLI and Here is the First 3DMark Fire Strike Extreme Bench with the Cards at stock settings and the 4960X at a 46X multiplier with the Memory running at default (2400MHz).
 
Unfortunately the Futuremark results are not Valid because they have not OK'd the 344.48 drivers as of Yet, But Who Cares!
 
At This point, I'm just happy to get everything back together and working once again!
 

Where is the 5960x? You holding off for the Classifieds to add into that one?

johnksss
I think he just mislabeled it. It's a 5960X he is running.

 
I hate mobile, lol.  I should have waited to ask, until I could get to a PC and look.

The 3DMark Fire Strike Score is pretty good (#10 Position), Even though I can't go much over 4.698GHz on the 5960X using just Water Cooling, Although I did improve over my Best previous Score.
 
Eventually I'll need to go to Phase Change on the CPU to get past 4.7GHz.
 

 
 
 
 

johnksss
See. I told you you could do it!. Great job!

Thanks John, I see that You've already gone to Phase Change, Right?

3dm11 and vantage are a bit harder on a cpu than firestrike.

And yes, broke out the ss. Wanted to make sure my chip was not a super dud. Lol

First run on Vantage Performance.......
 

http://i175.photobucket.c...16/vantage-p71219c.png

 
I'm pretty happy with that considering everything is on air. Still waiting for my second 290X block before I put everything under water. I'll probably want to try and get my hands on a better CPU pretty soon though... I forgot how much benching makes you want more and more....
 
 
@hallowen
 
Any reason you're running your RAM so slow? Those speeds\timings seem like they're well below what your sticks are spec'd at. 

Rudster816
 
@hallowen
 
Any reason you're running your RAM so slow? Those speeds\timings seem like they're well below what your sticks are spec'd at. 

The Memory was tested at XMP#1 2800MHz (1400 on CPU-Z) and XMP#2 3000MHz (1500 on CPU-Z) briefly when I was changing over from an EVGA X99 Classified that wouldn't run those XMP settings without problems to my current New ASUS R5E that I have just got up and running Only Today in 4-Way SLI with the EVGA GTX 980 ACX 2.0 Cards, So I haven't really done any changes from the Memory Default settings as of yet.

johnksss
Never even ran that test with 4 cards yet.

Do you mean the 3DMark 11 Extreme test?
 
I've seen your results on 3DMark Vantage Performance....Very Nice!

johnksss

hallowen

johnksss
Never even ran that test with 4 cards yet.

Do you mean the 3DMark 11 Extreme test?
 
I've seen your results on 3DMark Vantage Performance....Very Nice!

Yes. I forgot about doing 4 card 3d11X. Just did it though.
 
Thanks! Re running a vantage run now. I hope it completes.
 
I see you over there at the post mr number one 3d11X. 
 
But i would do all that stuff last. Do all global points stuff first.
Just a suggestion.
 
Edit:
It crashed. 

LOL, Sounds like the Story of My Life Also!
 
I'll try to get more Global points as soon as possible. It's been a Long day for me.......

Yeah, The way things look to me as far as for the GTX 980 Classifieds (No modded Bios, No EVBot Firmware) and the Asking Price EVGA wants for their "Own Privately manufactured PCB Board" is causing me to just hold off and enjoy what I have.

johnksss
A better cpu? Whats wrong with that one?

 
It's not the greatest OCer ever. I haven't had it under water yet so I don't have a full picture yet, but I have to pump a lot of voltage into it just to get it stable at 4.2\4.3.