awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:Get It Colder II
2011/05/07 13:30:55
(permalink)
I'll be sure to let you know.
|
Re:Get It Colder II
2011/05/07 13:34:24
(permalink)
awalleyeguy
I'll be sure to let you know.
cool. because you might have a few of them a bit nervous as well...lol your at 345 points now, but benching something like that..would put you up in the 500 points category.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.  
|
Re:Get It Colder II
2011/05/07 14:15:34
(permalink)
johnksss
side note:
you kind of have a lot of people waiting to see...
Other than me?  Just had a near death experience. Was flying space combat on an old star wars game, not even with the GPU OC'd and it started throwing our artifacts like crazy, then the driver crashed. Artifacts were still there, so I restarted, and they're gone now.. I don't want a 480, so hopefully it's okay.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/05/07 14:18:35
(permalink)
to be honest halo...there is nothing wrong with a 480. and it plays dx11. so it's not a loss going from a 295 to that. the 295 had it's day in the sun...quite a few of them i might add, but now....  a 480 is a long way from going backward my friend...
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder II
2011/05/07 14:20:26
(permalink)
True but I'd have to get another block then. lol fortunately people have them cheap so I wouldn't have to pay retail ideally. Gonna run Furmark for a bit and pray.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/05/07 14:25:06
(permalink)
the transition wont be a hard one. it just might take a few days...but if the card was bad and they said they were upgrading you...then that's when you would buy the block or blocks as well. and a 480 can run pretty high on clocks on just air. just dont over due the mem clocks is all. as for furmark... if your trying to break the card...sure...run furmark for hours on end... i would check for leaks on the card myself.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder II
2011/05/07 14:30:30
(permalink)
johnksss
the transition wont be a hard one. it just might take a few days...but if the card was bad and they said they were upgrading you...then that's when you would buy the block or blocks as well. and a 480 can run pretty high on clocks on just air. just dont over due the mem clocks is all.
as for furmark... if your trying to break the card...sure...run furmark for hours on end...
i would check for leaks on the card myself.
Fortunately I have an EAR on this card. If I end up RMAing and getting a 480 I'll pick up an EK Nickle block probably. Gonna run furmark for 5 minutes, then give it 5 loops of vantage, 3 of heaven, etc. Leaks are a negative, temps were around 40C. Didn't red light, it's seated fine, not sure why it would have done that other than it's dying.  Edit: After Furmark it's still okay.
post edited by Halo_003 - 2011/05/07 14:38:40
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder II
2011/05/07 15:09:31
(permalink)
|
Re:Get It Colder II
2011/05/07 17:47:22
(permalink)
xxrabid93
Good to know that 295 is still kicking. Edit: Rockin'
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/05/07 17:48:08
(permalink)
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder II
2011/05/07 18:02:29
(permalink)
xxrabid93
My 480 can run 900-925 core and 1100-1125 mem on cold air for benching. And that was at 1138mv, it's max v in AB; and it's max temps were 38*C. It needs moar voltz!!! Based on the bot, that is pretty good for a card on air. I just wish i had a Sandy B*tch or 990x to run with it on ln2 to get some nice points.
Have you searched XS for an extreme version of afterburner? Take a look
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder II
2011/05/07 18:34:18
(permalink)
Q56_Monster
xxrabid93
My 480 can run 900-925 core and 1100-1125 mem on cold air for benching. And that was at 1138mv, it's max v in AB; and it's max temps were 38*C. It needs moar voltz!!! Based on the bot, that is pretty good for a card on air. I just wish i had a Sandy B*tch or 990x to run with it on ln2 to get some nice points.
Have you searched XS for an extreme version of afterburner? Take a look
I could have sworn we've talked about this before. I used AB Volt Unlock and it let me set the voltage higher, but when applying, it would set back to 1138. That was a modded 2.0 iirc. Is the one you are talking about the modded 1.6? I am pretty sure i tried that too, maybe i'll have to try it again though.  Edit: Q do you have a copy of the 1.6 extreme version? I can't seem to find it anywhere...Maybe i didn't try it then. Edit 2: Pretty sure i just found it on OCX.
post edited by xxrabid93 - 2011/05/07 18:47:38
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder II
2011/05/08 08:54:49
(permalink)
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:Get It Colder II
2011/05/09 14:13:52
(permalink)
 Well it seems I killed another 2600K. But this one at least still runs up to 4.7Ghz. Yeah that one. Though I never could get it to boot above 5.6Ghz. 5.9 must have been a 1 time deal, CPU was brand spanking new then. But I have another. Don't know how it clocks yet.
post edited by awalleyeguy - 2011/05/09 14:16:37
|
Re:Get It Colder II
2011/05/09 14:18:30
(permalink)
hold on there speed racer..
if your not going cold..then dont push the cpu hard..
most of us testing 2600k's are below zero and it usually takes only 2 minutes to know what the chip is.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:Get It Colder II
2011/05/09 15:43:20
(permalink)
You are correct sir.
Just got a little antsy. It won't happen again.
|
cudenver
FTW Member
- Total Posts : 1032
- Reward points : 0
- Joined: 2009/04/18 19:31:13
- Status: offline
- Ribbons : 1
Re:Get It Colder II
2011/05/09 18:52:59
(permalink)
what temp did it get up too. just curious awalleyeguy
Well it seems I killed another 2600K. But this one at least still runs up to 4.7Ghz.
Yeah that one. Though I never could get it to boot above 5.6Ghz. 5.9 must have been a 1 time deal, CPU was brand spanking new then.
But I have another. Don't know how it clocks yet.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 19:34:02
(permalink)
How to boot full speed? BIOS says -25c RealTemp says -9c My CPU won't go above 12x multiplier though. This is a i7 965EE and the multiplier is set at 29x. The BIOS seems to think the CPU is overheating and won't let it run at full speed. I have enabled Extreme Cooling mode (EVGA x58 SLI).  Boot up with the Phase Change off and then turn it on?
|
Re:Get It Colder II
2011/05/09 19:49:53
(permalink)
ty_ger07
How to boot full speed?
BIOS says -25c
RealTemp says -9c
My CPU won't go above 12x multiplier though. This is a i7 965EE and the multiplier is set at 29x. The BIOS seems to think the CPU is overheating and won't let it run at full speed. I have enabled Extreme Cooling mode (EVGA x58 SLI).
Boot up with the Phase Change off and then turn it on?
Will it boot all at stock?
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 20:04:32
(permalink)
Halo_003
ty_ger07
How to boot full speed?
BIOS says -25c
RealTemp says -9c
My CPU won't go above 12x multiplier though. This is a i7 965EE and the multiplier is set at 29x. The BIOS seems to think the CPU is overheating and won't let it run at full speed. I have enabled Extreme Cooling mode (EVGA x58 SLI).
Boot up with the Phase Change off and then turn it on?
Will it boot all at stock?
... Will get back to you. The double pumping ... piece of ... EVGA board ... I have to wait forever to do anything when minding the restart cycle time of the compressor.
|
Re:Get It Colder II
2011/05/09 20:14:18
(permalink)
turn off speed step in the bios
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 20:35:42
(permalink)
Ah hah!
But I easily overload it. I will have to carefully ballance between voltage and cooling. 1.5v @ 4.3GHz overloads it after about a minute. But, I probably don't need 1.5v any more...
This will be quite the learning curve.
|
Re:Get It Colder II
2011/05/09 20:41:00
(permalink)
that's too much voltage... start all over.
every thing set to auto.
set the cpu voltage to 1.375V
and the cpu speed to 4 ghz
turn of speed step only.
then from in windows...start upping the blck or multiplier. (5 at a time blck) or (1x multiplier)
if you run blck then go till it crashes...then set it 5 points under the crash spot in windows. you should be able to do far greater than where your at now.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 21:09:24
(permalink)
AHHHHH!!!!
I need another power supply!
I tried to run the phase unit off of a Heathkit power supply, but it overloaded it.
This stupid EVGA board has always been a pain to get booting in one try. Now this thing is just killing me...
|
cudenver
FTW Member
- Total Posts : 1032
- Reward points : 0
- Joined: 2009/04/18 19:31:13
- Status: offline
- Ribbons : 1
Re:Get It Colder II
2011/05/09 21:14:26
(permalink)
what program in windows do you use to rase the blck. johnksss
that's too much voltage... start all over.
every thing set to auto.
set the cpu voltage to 1.375V
and the cpu speed to 4 ghz
turn of speed step only.
then from in windows...start upping the blck or multiplier. (5 at a time blck) or (1x multiplier)
if you run blck then go till it crashes...then set it 5 points under the crash spot in windows. you should be able to do far greater than where your at now.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 21:35:21
(permalink)
 It's a start.
|
ty_ger07
Omnipotent Enthusiast
- Total Posts : 11921
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: Land of 10,000 lakes.
- Status: offline
- Ribbons : 98
Re:Get It Colder II
2011/05/09 22:08:42
(permalink)
Oh man!
I'm going to be gunning 4 cores / 4 threads with my 9400GT @ ~900MHz core in XP. 3Dmark03 gold will finally be mine.
|
Re:Get It Colder II
2011/05/09 22:18:18
(permalink)
nice work ty_ger07!
cudenver:
depends on your board. most evga boards can run off of eleet.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
drnilly007
Superclocked Member
- Total Posts : 116
- Reward points : 0
- Joined: 2006/04/12 10:08:31
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2011/05/09 22:20:29
(permalink)
Wow some crazy stuff here! But nice scores on 3dmark
the Way, the Truth, the Life...did you know your His favorite!
|
Re:Get It Colder II
2011/05/09 22:34:27
(permalink)
ty_ger07
It's a start.
Whoa. VERY nice! Try running superpi on that speed. Sidenote: I need to get a phase. CPU seems to want cold. 4.4Ghz 1.33Vcore, refuses to go over 4550 with 1.5V though. My dad is looking for a vaccum pump still, and I'm looking into the refrigerant cert.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
