Tribbs
Superclocked Member
- Total Posts : 236
- Reward points : 0
- Joined: 2009/02/13 07:42:36
- Status: offline
- Ribbons : 0

Re:Get It Colder II
2011/02/14 11:00:26
(permalink)
Hmm, well I see it as 599 now still not bad though
CM ATCS 840 Corsair HX 750 Intel I7 920 - DO @ 3.62ghz Evga x58 LE 6gb Corsair Dominator's @1600mhz 2xgtx460 1gb EE 128gb corsair P series ssd WD Black 640gb
|
Re:Get It Colder II
2011/02/14 12:07:25
(permalink)
There we go I see it at 599 now.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
voklskier4452
CLASSIFIED Member
- Total Posts : 4001
- Reward points : 0
- Joined: 2008/08/27 15:34:29
- Location: VT
- Status: offline
- Ribbons : 8

Re:Get It Colder II
2011/02/14 13:00:49
(permalink)
Just a reminder guys. If you want to participate in forumwarz please get either your stock scores submitted or post a set of scores containing zeroes.
Asrock Z77E-ITX | Intel i5 3570K @ 4.5ghz | 8gb Gskill Ripjaws X 1600mhz | Corsair H80i Asus GTX 670 DCU II | Sandisk Extreme 120gb | Silverstone ST45SF-G | Silverstone SG-05
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10

Re:Get It Colder II
2011/02/14 15:32:37
(permalink)
990X available on the egg, probably why the 970 finally went down.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder II
2011/02/14 16:09:39
(permalink)
Halo_003 Hey Nateman how much would you charge me for a block that could sandwich two of these? With the idea of cooling the hotside with a dedicated loop, and using the cool side to chill water. Probably more than I'd like to spend, I wanna just get a SS but can't afford it, no job. The 226 Watt model? 1st, you would have to doodle something up as a sketch. MS Paint or something. 2nd, you would have to get the design approved by lehpron-the "regular guy" *cough* genius*cough* Then we will figure out how to make it.
post edited by nateman_doo - 2011/02/14 16:11:52
|
Re:Get It Colder II
2011/02/14 16:17:18
(permalink)
Ha alright. I really just need an H50/H70 to test it. As in, put the Swiftec GTZ I have on the cold side, in my loop, put the H50/H70 on the other side to cool the hot side. Really curious what the temps would be like. <message altered by Chuck Norris 17,000B.C.>
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
voklskier4452
CLASSIFIED Member
- Total Posts : 4001
- Reward points : 0
- Joined: 2008/08/27 15:34:29
- Location: VT
- Status: offline
- Ribbons : 8

Re:Get It Colder II
2011/02/14 17:50:30
(permalink)
Multi tec chiller. Just saying...
Asrock Z77E-ITX | Intel i5 3570K @ 4.5ghz | 8gb Gskill Ripjaws X 1600mhz | Corsair H80i Asus GTX 670 DCU II | Sandisk Extreme 120gb | Silverstone ST45SF-G | Silverstone SG-05
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder II
2011/02/14 22:15:44
(permalink)
Halo, i am bored, so i can work on a design for the tec chiller. I have started it, and am doing it in Autodesk Inventor. Nate could mill it out on his CNC maybe?
|
Re:Get It Colder II
2011/02/14 22:17:47
(permalink)
Depends on the projected cost lol.. But what the heck, if you wanna design it, have at it.  Preferably able to sandwich two or three of the 226W TECs. On the lookout for a Dewar right now, between 20-30L. Preferably cheap. But working. Praxair here will fill a 30L for $55, not horrible.
post edited by Halo_003 - 2011/02/14 22:22:06
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/02/14 22:55:00
(permalink)
is that the out the door price or tax and hazmat fee as well?
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
Re:Get It Colder II
2011/02/14 22:57:48
(permalink)
johnksss is that the out the door price or tax and hazmat fee as well? Not sure, I talked to them on the phone and the guy said it was about $55 for a 30L.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder II
2011/02/14 22:59:39
(permalink)
Halo_003
Depends on the projected cost lol.. But what the heck, if you wanna design it, have at it. Preferably able to sandwich two or three of the 226W TECs.
On the lookout for a Dewar right now, between 20-30L. Preferably cheap. But working. Praxair here will fill a 30L for $55, not horrible.
Started one for 2 226w tecs. The actual cost of the material, if it is full copper, i think would be around $100, based on McMasterCarr.
|
Re:Get It Colder II
2011/02/14 23:06:18
(permalink)
ok. the last time i bought some it was 1.50 a liter and i got like 45 liters so 67 bucks, but then they added tax and some fee...total... 80 bucks. this time it was the same price, but for a full 60L....
post edited by johnksss - 2011/02/14 23:13:35
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder II
2011/02/15 03:10:16
(permalink)
xxrabid93 Started one for 2 226w tecs. The actual cost of the material, if it is full copper, i think would be around $100, based on McMasterCarr. Yea, copper ain't cheap! btw, John, Hazmat tax?? its LN2?? the most abundant natural element floating in the air right now? whats hazardous about it?
|
Re:Get It Colder II
2011/02/15 07:00:41
(permalink)
it can flash freeze a person it can give a person frostbite hazmat fee= hazardous material fee and california has tax on it. since it's used in all the hospitals and chemical labs. i wish we were lucky like you...but....we are not....:( side note...all though the small no name outfit was going to do no tax, but stay at 120 bucks for 60L.....i guess it's alright now....gonna ask if my resale license is good there...lol (airgas that is)
post edited by johnksss - 2011/02/15 07:11:48
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
Re:Get It Colder II
2011/02/15 08:46:42
(permalink)
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
Re:Get It Colder II
2011/02/15 09:17:49
(permalink)
John what is that on the board? nateman_doo xxrabid93 Started one for 2 226w tecs. The actual cost of the material, if it is full copper, i think would be around $100, based on McMasterCarr. Yea, copper ain't cheap! Ouch. lol the top can be aluminum if that would bring the cost down. The contact surface is the only one that matters really imo. Acrylic wouldn't be good for it though.. Any pics?
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder II
2011/02/15 12:05:33
(permalink)
John, motherboard spread? did u post a pic I can't see at work? Halo, still need a sketch.
|
Re:Get It Colder II
2011/02/15 12:32:04
(permalink)
nateman_doo John, motherboard spread? did u post a pic I can't see at work? Halo, still need a sketch. oh damn, yes i did. so remote into your home machine and view it...lol
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder II
2011/02/15 12:40:56
(permalink)
If I could do that... I would be a VERY happy man.
|
Re:Get It Colder II
2011/02/15 12:48:49
(permalink)
oh yeah, you tried teamviewer and it didnt work...even the vpn didnt work either?
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
Re:Get It Colder II
2011/02/15 14:58:59
(permalink)
Rabid's doing the sketch Nateman.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/02/15 15:48:34
(permalink)
Halo_003
John what is that on the board?
nateman_doo
xxrabid93 Started one for 2 226w tecs. The actual cost of the material, if it is full copper, i think would be around $100, based on McMasterCarr.
Yea, copper ain't cheap!
Ouch. lol the top can be aluminum if that would bring the cost down. The contact surface is the only one that matters really imo. Acrylic wouldn't be good for it though..
Any pics?
it's dragon skin pro fx.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
RBIEZE
CLASSIFIED Member
- Total Posts : 4182
- Reward points : 0
- Joined: 2007/02/21 00:13:33
- Location: Northern Illinois...lurking in the Corn
- Status: offline
- Ribbons : 12

Re:Get It Colder II
2011/02/15 15:55:57
(permalink)
Did someone say they needed a custom multi TEC block ??? Ive got the chips flying right now on some Evap heads... Just came up from the man cave to grab some coffee and food...
post edited by RBIEZE - 2011/02/15 18:01:20
Attached Image(s)
They say opposites attract. I hope you meet someone who is good-looking, intelligent, and cultured. http://www.youtube.com/watch?v=W2WsPN-rr9o Evga X58 4Way sli,W'Cooled i7 950 @3.8, Mushkin redline mem @6-7-6-18 1600Mhz, 2-Evga GTX770 Sli, Evga Gtx460 Physx, Corsair Neutron 120GB SSD,Samsung 240SSD, W.D Black 640GB /Corsair TX950 Psu, Hanns-G 28" Lcd, Logitech G540 5.1 Surround My Affiliate Code: EECLVEDV7Z
|
Re:Get It Colder II
2011/02/15 16:17:00
(permalink)
That is awesome but confusing RBIEZE. Hopefully you got my PMs? John, how well does it work?
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder II
2011/02/15 16:26:47
(permalink)
for me, it's working like a true champ. eraser wasn't cutting it...it was transferring to much cold to surrounding parts.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|
RBIEZE
CLASSIFIED Member
- Total Posts : 4182
- Reward points : 0
- Joined: 2007/02/21 00:13:33
- Location: Northern Illinois...lurking in the Corn
- Status: offline
- Ribbons : 12

Re:Get It Colder II
2011/02/15 17:53:01
(permalink)
Halo_003 That is awesome but confusing RBIEZE. Hopefully you got my PMs? John, how well does it work? Yup, sure did...
They say opposites attract. I hope you meet someone who is good-looking, intelligent, and cultured. http://www.youtube.com/watch?v=W2WsPN-rr9o Evga X58 4Way sli,W'Cooled i7 950 @3.8, Mushkin redline mem @6-7-6-18 1600Mhz, 2-Evga GTX770 Sli, Evga Gtx460 Physx, Corsair Neutron 120GB SSD,Samsung 240SSD, W.D Black 640GB /Corsair TX950 Psu, Hanns-G 28" Lcd, Logitech G540 5.1 Surround My Affiliate Code: EECLVEDV7Z
|
Re:Get It Colder II
2011/02/15 18:05:44
(permalink)
Yeah, got a list like I asked?
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder II
2011/02/15 20:58:10
(permalink)
John, looks like Vaseline. Rob, sexy! I haz pics for the morning. Been making some chips fly myself ;)
|
Re:Get It Colder II
2011/02/15 23:13:26
(permalink)
nateman_doo John, looks like Vaseline. Rob, sexy! I haz pics for the morning. Been making some chips fly myself ;) looks like vaseline, but is 99.9 percent cleaner... but there is vaseline in the socket though. i take no chances with the socket anymore...
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake. 
|