farthestkris

sounds like a dead 920 or one that doesn't OC like it did 

Some people kill me lol

lol +1 threed.
 
Would you guys mind helping me get to around 4.5-4.6 benchable?
 

Would you guys mind continuing to help me get back to 4.5 and up to 4.6 benchable?

johnksss

the only one bench able at 4.6 on air is awalleye. he seems to be the master at that.....

+2 threed

lol John, water, water.

Halo_003

lol +1 threed.

Would you guys mind helping me get to around 4.5-4.6 benchable?

 I was.

voklskier4452

xxrabid93

voklskier4452

Just a reminder here to everyone that we need stock scores by the 14th.  The earlier the better for us.

Just submitted my stock scores. When can we start getting oc results? do we have to wait for the 17th, or can we run now, and sit on them until the 17th?

You can run them whenever you want but you can't submit till the 17th.

Sweet, good to know.

awalleyeguy

Halo_003

lol +1 threed.

Would you guys mind helping me get to around 4.5-4.6 benchable?

I was.

Probably should have said,
 
"Would you guys mind continuing to help me get back to 4.5 and up to 4.6 benchable?"
 
What I meant, sorry if you took offense to that I didn't mean it that way. I appreciate the help so far.

xxrabid93

Halo_003

voklskier4452

xxrabid93

voklskier4452

Just a reminder here to everyone that we need stock scores by the 14th.  The earlier the better for us.

Just submitted my stock scores. When can we start getting oc results? do we have to wait for the 17th, or can we run now, and sit on them until the 17th?

You can run them whenever you want but you can't submit till the 17th.

So does that mean run and save, or run and submit to futuremark etc, and don't post either way?

I'm guessing run and save. And you could just do that anyways to be on the safe side. And i have to do that because my bench rig has a stripped OS on it, so no internet on it. I save all my results and sumbit from my main rig.

You can run and submit to futuremark or geekbench if you want.  But do not post them at 411 or TRP until the 17th.

he seems to be able to work miracles if you ask me...lol.
best i could do on chilled water was like 4.78 ghz / 920

 OK. Now this is how myths get started. The 920 that I an using right now I ran at 4.6 on air stable per 20 lines linx 25000 problem size. And the temps never broke 90c. Ambient was 65-70f.
I did that to show John this batch chip could do it. Batch 3912B160 this batch is not "golden" so they say. I am not so sure. I have never really tried to push this one.
All other runs and stuff are on water.And different CPU.
  But I have run my 580's at 1000/2000/2320 on stock air.

Edit: honestly I do not remember the v-core but I am thinking it was less than 1.5 and With vdroop.
 

 Well I didn't do that on purpose. Man I can't believe I posted that incorrectly. Sorry.
post 784

 
 

 This one is better

halo its your RAM/PLL both too high for water cooling.

Tribbs

http://kingpincooling.com/forum/showthread.php?t=1089

Saw this over in the enemy's camp  and may have to try it out, may have to modify my blockman special to do it, and i wish that kingpin would hurry up and finish that dice base for the gemini, ive been itching to get one.  

You know, a while back I was looking for a PCI-E extension to do that very same thing. 

Try and do one thing at a time.
Core
Uncore
Ram
When finding your core clock lower your uncore speed and ram speed. Also loosen your ram timings. And hop on the 2/6 ratio. There is a pretty good chance that you cant do 4.6 on water. Try and keep your pll @1.35-1.4 Then start testing according to temp if your idleing past 38 than you need more cold for most benches. The 930 I have now wont let me bench vantage past 4.4ish on water, and I can only hit past 2ghz ram @ 3.6 or so.

Was benchable at 4.5 before, just lost my settings lol..
 
Frequency Control    
CPU Clock Ratio ( 21X )    
CPU Host Frequency (Mhz) ( 209 )    
MCH Strap ( 1600 )    
CPU Uncore Frequency (Mhz) ( Auto )    
CPU Clock Skew ( 0 ps )    
Spread Spectrum ( Disabled )    
PCIE Frequency (Mhz) ( 102 )    


Memory Feature            
Memory Speed (Standard)    
Memory Control Setting ( Enabled )    
Memory Frequency ( 800Mhz / 2:6 )    
Channel Interleave Setting ( 6 Way )    
Rank Interleave Setting ( 4 Way )    
Memory Low Gap ( Auto )    
tCL Setting ( 6 )    
tRCD Setting ( 7 )    
tRP Setting ( 6 )    
tRAS Setting ( 18 )    
tRFC Setting ( Auto )    
Command Rate ( 1t )    


Voltage Control    
EVGA VDroop Control ( Without VDroop )    
CPU VCore ( 1.5125 )    
CPU VTT Voltage ( +150 )    
CPU PLL VCore ( 1.905 ) <-- just for testing purposes currently..   
**IOH PLL VCore ( 1.500 )     
DIMM Voltage ( 1.65 )    
DIMM DQ Vref ( +0mV )    
QPI PLL VCore ( 1.350 )    
IOH VCore ( 1.150V )    
IOH/ICH I/O Voltage ( 1.500V )    
**BR04 ( NF200) Voltage ( Auto ) (only on E-759)    
**VTT PWM Frequency ( 610 KHZ )    
**CPU PWM Frequency ( 1210 KHZ )    
**CPU Impedance ( Less )    
ICH VCore ( 1.1000 )    
DDR Signal 0:  ( -31 )  
DDR Signal 1:  ( -31 )  
DDR Signal 2:  ( -31 )  
CPU Signal:  ( -62 )  
QPI Signal 0:  ( -62 )  
QPI Signal 1:  ( -30 )  
QPI Signal 2:  ( -31 )  
PCIE Signal 0:  ( -20 )  
PCIE Signal 1:  ( -20 )  
   

CPU Feature    
Intel SpeedStep ( Disabled )    
Turbo Mode Function ( Disabled )    
CxE Function ( Disabled )    
Execute Disable Bit ( Disabled )    
Virtualization Technology ( Disabled )    
Intel HT Technology ( Enabled )    
Active Processor Cores ( All )    
QPI Control Settings ( Enabled )    
QPI Link Fast Mode ( Enabled )    
QPI Frequency Selection ( 4.800 GT/s )    
OC Recorvery ( Disabled )