nateman_doo

Here is what I have been trying to do for the past MONTH:

Now if you have no idea what you are looking at I will tell you.  Aside from the Hershey kiss, It is just a hunk of Aluminum scrap 8x10.  You see the small 6" precision machinist ruler in the background?  That is probably just under a millimeter thick... and its standing on end!  Also, more important, there are no gaps of light underneath it.  After a month of trying to get this thing to within half a thousandth of an inch of precision, I have finally succeeded!

That means.... my CNC machine is a TOTAL SUCCESS!!!

nateman_doo

Here is what I have been trying to do for the past MONTH:

Now if you have no idea what you are looking at I will tell you.  Aside from the Hershey kiss, It is just a hunk of Aluminum scrap 8x10.  You see the small 6" precision machinist ruler in the background?  That is probably just under a millimeter thick... and its standing on end!  Also, more important, there are no gaps of light underneath it.  After a month of trying to get this thing to within half a thousandth of an inch of precision, I have finally succeeded!

That means.... my CNC machine is a TOTAL SUCCESS!!!

awalleyeguy

 Sure one of the terminator movies had a big truck with LN2.

Halo_003

Update: Flashed to latest bios (78)

Frequency Control 
CPU Clock Ratio ( 21X ) 
CPU Host Frequency (Mhz) ( 215 ) 
MCH Strap ( Auto )  1600
CPU Uncore Frequency (Mhz) ( 3446Mhz { 16X } )  Auto
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 109 ) 


Memory Feature         
Memory Speed ( XMP Profile 1 )  don't use XMP profiles manual OC
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1067Mhz / 2:8 ) 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 8 ) 
tRCD Setting ( 9 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1t ) 


Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.5875 ) 
CPU VTT Voltage ( +450 )  +250
CPU PLL VCore ( 1.800 )  1.425
**IOH PLL VCore ( 1.500 )   1.425
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.450 )  1.3
IOH VCore ( 1.300V ) 
IOH/ICH I/O Voltage ( 1.650V )  1.350
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 610 KHZ ) 
**CPU PWM Frequency ( 1210 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle ) <-- not on my bios.
ICH VCore ( 1.250 )  1.2
*PWM Frequency ( Not Used on Classified ) 
DDR Signal 0:  (+0)
DDR Signal 1:  (+0)
DDR Signal 2:  (+0)
CPU Signal:  (+0)
QPI Signal 0:  (+0)
QPI Signal 1:  (+0)
QPI Signal 2:  (+0)
PCIE Signal 0:  (+0)
PCIE Signal 1:  (+0)
CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Disabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recorvery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 4096 )