Q56_Monster

threedhero

Looks like you were back up and running Q glad to hear it. I see you got some globals!
For the 580 did you use the GPU-z 580 OCP test build for higher Vcore and clocks?

No, I did not.  To my knowledge, that version of gpu-z only corrects the card's automatic down throttle when using graphically intense applications, such as furmark & occt.  I don't think it allows vcore to be raised more than the internal limit of the card, which is 1.213v.  For that I believe a hard mod is necessary.  Am I wrong?

voklskier4452

Haven't posted in here in quite some time but I am in the process of acquiring a Phase cooler finally.  Tuned for 300w and made by RunMC of http://www.under-the-ice.com/ 
 
Lots benchmarks and pictures to follow once it is in my hands :) 

johnksss

was going to say sdumper as well.

voklskier4452

He's the other guy in the phase business I would trust.  he has a cased up SS that is tuned for 300w @ -40 for sale right now for about $100 off his normal price.

Halo_003

Q did you ever figure out how to get a compare link with the new orb? I can't find it.

SniperOZ
Hay Q clean up your PM's............PM sent

DENTNU

Hi everyone really nice thread you got here.  I was wondering if someone could help me pass my CPU 4.5ghz mark.  I have tryed a few times to raise my CPU higher than this but its like it hit a wall and can never get it 100% stable once I go over the 4.5ghz. Johnksss advised  me to make a post here to see if someone could help me out. 
Thanks 

Here is my current template that I have been using for the past 6 months and it is 100% Stable

                                                                                            
Frequency Control 
CPU Clock Ratio ( 25x   )                                             
CPU Host Frequency (Mhz) ( 181 )                                
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( Auto )                               
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 100 )

Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1066 / 2:8 )                             
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 7 ) 
tRCD Setting ( 7 ) 
tRP Setting ( 7 ) 
tRAS Setting ( 20 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1T ) 

Voltage Control 
EVGA VDroop Control ( WITH VDroop ) 
CPU VCore ( 1.46875v )       1.5 or higher with v-droop                                                
CPU VTT Voltage ( +100mv ) 
CPU PLL VCore ( 1.35 ) 
**IOH PLL VCore ( 1.35 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( Auto) (+0mV) 
QPI PLL VCore ( 1.200 ) 
IOH VCore ( Auto )  1.35
IOH/ICH I/O Voltage ( Auto )  1.55  higher for better gpu scoring
ICH VCore (1.100) 1.2 up to 1.3 to stabilize cpu test 2 of vantage 
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Less ) 

CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recovery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 128  ) 
 
Power Management Setup 
ACPI Suspend Type ( S3 )    
HPET Support ( Enabled )      
HPET Mode ( 64-bit )