nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/06/13 17:52:49
(permalink)
BENCH THE CARDS! the doo shop is SOO busy the past few weeks. Man if I only had a clone to help out. 
|
Re:Get It Colder......2
2010/06/13 18:06:01
(permalink)
bench the cards on full air and you should be fine.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.  
|
Re:Get It Colder......2
2010/06/13 19:14:16
(permalink)
johnksss
bench the cards on full air and you should be fine.
+1. Just don't do anything like crazy like 1200mV for the 295 etc.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/13 20:04:24
(permalink)
 take that long drive you were telling me about get some dice and whale on those cards
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/06/13 20:13:57
(permalink)
haha, well it seems unanimous. Ya, i'm gonna bench them. I probably would have without asking, but the push from you guys always helps.  Oh, and the card i thought was an 8600gt actually is a 9800gt ee (once i pulled it out i obviously saw what it was). What should be the highest mV i should push the 295 on air? @Halo: I get the cards as long as i take to fix up the systems. I worked on them today, and both seem to have bad PSU's, but i think i'll wait a week or two to tell my family friend.  @reggie: i wish i could throw them under some DICE. But i have no gpu pot. I'm still looking for a cheap one. *cough*Nate*cough*
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/13 20:17:29
(permalink)
you can still jack up your vantage score with a dice cpu score
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/06/13 20:41:14
(permalink)
Halo_003
johnksss
bench the cards on full air and you should be fine.
+1. Just don't do anything like crazy like 1200mV for the 295 etc.
But these go to 11.... xxrabid93
What should be the highest mV i should push the 295 on air?
Mine were like John's and Nate's...they could go 1200 on air, 1300 on H20. To be safe you could just use Evga VT and just go to max 1188. I wouldn't waste too much time getting up to 1188 either.
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 
|
threedhero
SSC Member
- Total Posts : 889
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/13 20:42:43
(permalink)
Making some head way with my 920, at 3c it will start taking higher volts and in turn letting me reach a higher bclock. Haven't dug into very much busy weekend.
Thought I might have trouble with my koolance 345 CPU block since its 3 pieces but it works like a charm. I don't even need to cover up the lock down bolts, makes for easy tear down.
|
Re:Get It Colder......2
2010/06/13 21:02:22
(permalink)
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/06/14 04:50:45
(permalink)
Halo_003
Ha I've unlocked my VT so I can go to 2000mV.
Let me know if you can get over 1313mV
|
Re:Get It Colder......2
2010/06/14 09:08:45
(permalink)
nateman_doo
Halo_003
Ha I've unlocked my VT so I can go to 2000mV.
Let me know if you can get over 1313mV
Need a pot or block to keep the temps in check for that. Can't load over 96C on GPU 1 or it crashes. Such a shame, 1200mV used to load @ 90C in IL. In FL 1163mV loads that high. Need money for tek 9, but when I get it I will let you know.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/06/14 10:58:35
(permalink)
How do 3dMark tests load the proc temp-wise, compared to linX?
Just thinking a bit, as i need to get my i7 up some more if i want to get some nice bench scores with the 295, 8800gtx, and 9800gt. Right now it's at 4ghz, 1.35vcore, idles at 50*C on a bad day, 43*C on a good day, and on full load linX it is around 80-90*C once it gets into it.
I'm hoping to get to at least 4.4ghz bench stable.
|
reggiesanchez
FTW Member
- Total Posts : 1738
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/14 11:10:52
(permalink)
never ran linux but it sounds like it will be around the same, Im pretty sure both tests put a 100 percent load on your cpu
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/06/14 11:53:46
(permalink)
Halo_003
Need a pot or block to keep the temps in check for that. Can't load over 96C on GPU 1 or it crashes. Such a shame, 1200mV used to load @ 90C in IL. In FL 1163mV loads that high. Need money for tek 9, but when I get it I will let you know.
heh... rookie :P
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/06/14 12:04:59
(permalink)
@reggie: just ran some Vantage cpu tests. I am getting around 75*C, so a little less that linX.
Is it better for 3dMark (any of them) to run w/o HT and higher speed or with HT and lower speed?
|
threedhero
SSC Member
- Total Posts : 889
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/14 13:09:56
(permalink)
You'll be able to reach a higher OC for sure than doing Linux runs. I would stay with Vantage as your CPU test for stability that should set the bar for the other 3D tests.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/06/14 13:23:29
(permalink)
Vantage cpu test 1 is the tougher than '06. There are no specific cpu tests on 05/03/01 so you can usually get away with much higher clocks on thoses.
YOu need to be up 4.4Ghz to start pushing the gpus and getting good scores
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
Re:Get It Colder......2
2010/06/14 14:11:33
(permalink)
+1
4.4 to 4.6
to get some nice numbers.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder......2
2010/06/14 14:58:55
(permalink)
Wow nobody else noticed? 200 Pages! 
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/06/14 19:05:31
(permalink)
I was just getting ready to post the 200th page. I was waiting more for the 6000th post, but figure that will happen whilst I sleep.
|
Re:Get It Colder......2
2010/06/14 19:14:02
(permalink)
6k will happen if a few hours for sure.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder......2
2010/06/14 19:22:00
(permalink)
all those blocks you making you better be saving for a 980 buddy!
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder......2
2010/06/14 20:08:22
(permalink)
johnksss
all those blocks you making you better be saving for a 980 buddy!
And 4 480s!
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:Get It Colder......2
2010/06/14 20:20:47
(permalink)
nate doesn't game. he would get more mileage out of a 980x.
then he can re bench everything he owns again...:) and then he can get A 480 and hold out like the rest of us...for the dual gpu board.:)
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
threedhero
SSC Member
- Total Posts : 889
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/14 20:31:44
(permalink)
485 GTX is already in the works about $20 more than a 480
|
Re:Get It Colder......2
2010/06/14 20:40:08
(permalink)
20 dollars more for onboard sli? are you sure about that.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
hellshealer
SSC Member
- Total Posts : 906
- Reward points : 0
- Joined: 2009/10/20 20:48:21
- Status: offline
- Ribbons : 1
Re:Get It Colder......2
2010/06/14 22:25:44
(permalink)
the 485 is a rumor for kit guru. it is suposed to be a 28nm revision of the 480 with a 20 mhz better core, the whole site looks dodgey and fake i wouldnt be taking any of it to heart :S
in other news!
i should have some pakages comming in soon for benching!
DFI lan party UT X48 trs3
3gb of corsair 1600mhz CL8 ram (trip channel)\
1 E8500
and with this set up i will be trying to get some decent OC's with my E2140 and E4400 :P
mah rig: HAF X i7 980X @4.3 (143x30) H70 eVGA X58 4-way SLI Classified 6gb kingston hyperX 1436mhz@ 8-8-8-88-1T Vraptor 150gb OS installed win 7 WD black 1tb storage eVGA GTX470 2 way SLI evga GT430 (second monitor) Antec 1200watt true power
|
threedhero
SSC Member
- Total Posts : 889
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/06/14 22:48:02
(permalink)
whoops my bad it's 20mhz more, but it's up in HWbot homepage.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/06/15 07:37:04
(permalink)
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......II
2010/06/15 07:43:31
(permalink)
johnksss
nate doesn't game. he would get more mileage out of a 980x.
then he can re bench everything he owns again...:) and then he can get A 480 and hold out like the rest of us...for the dual gpu board.:)
I all out game no less then once a week. EVERY Thursday I get my game on from right after work, until I run out of gas. Lets just say I have some upgrades planned, just working like a dog to fund said upgrades. i wonder what kind of score I would get if I re-benched my 8500GT. my 1st place trophy is boasting a killer P1499, I may be able to break the P1500 mark
|
