Re:Get It Colder......2
2010/04/09 02:42:28
(permalink)
going to have to start calling rudster..mr negativity guy 
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.  
|
ShockTheMonky
Omnipotent Enthusiast
- Total Posts : 10427
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/04/09 02:49:04
(permalink)
johnksss
going to have to start calling rudster..mr negativity guy
WWC would be better. (WET WASH CLOTH!) Puts a damp on everything.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/04/09 02:49:26
(permalink)
yea really... mr Negative guy...
John-I have never had any type of condensation on my pipe tape. By Frost King. I would venture to say you live in a considerably higher humidity zone? I mean in the summer Q & I get crazy humidity, but Im not sure why you would have condensation on the pipe tape unless you didn't put on enough.
Q, let me see if I can find some of the tape on Mc Master, because I bought some from them a while back
|
Re:Get It Colder......2
2010/04/09 02:55:22
(permalink)
ShockTheMonky
johnksss
going to have to start calling rudster..mr negativity guy
WWC would be better. (WET WASH CLOTH!) Puts a damp on everything.
yeah...lol nateman_doo
yea really... mr Negative guy...
John-I have never had any type of condensation on my pipe tape. By Frost King. I would venture to say you live in a considerably higher humidity zone? I mean in the summer Q & I get crazy humidity, but Im not sure why you would have condensation on the pipe tape unless you didn't put on enough.
Q, let me see if I can find some of the tape on Mc Master, because I bought some from them a while back
that's because i dont think i paid attention that day at the nates insulation and foam guide lesson i was using 20milpvc tape. its in the pictures i sent you a while back.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Rudster816
CLASSIFIED Member
- Total Posts : 4357
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re:Get It Colder......2
2010/04/09 05:30:52
(permalink)
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead  
|
voklskier4452
CLASSIFIED Member
- Total Posts : 4001
- Reward points : 0
- Joined: 2008/08/27 15:34:29
- Location: VT
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/04/09 05:32:22
(permalink)
regardless of whether or not rud went back to an XP install, 01 plain and simple isnt worth running on anything but a wolfdale, even running lower clock speeds and on a much weaker card I can outscore rud 
Asrock Z77E-ITX | Intel i5 3570K @ 4.5ghz | 8gb Gskill Ripjaws X 1600mhz | Corsair H80i Asus GTX 670 DCU II | Sandisk Extreme 120gb | Silverstone ST45SF-G | Silverstone SG-05
|
Rudster816
CLASSIFIED Member
- Total Posts : 4357
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re:Get It Colder......2
2010/04/09 05:40:12
(permalink)
I got ~82k when I did in XP for sh*ts and giggles, but yeah, you only have your CPU at 4ghz and a 4890 but your only 3k behind my score.
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead
|
voklskier4452
CLASSIFIED Member
- Total Posts : 4001
- Reward points : 0
- Joined: 2008/08/27 15:34:29
- Location: VT
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/04/09 05:56:13
(permalink)
thats just my low clock score (4ghz CPU max), i have runs up to 96k ;)
Asrock Z77E-ITX | Intel i5 3570K @ 4.5ghz | 8gb Gskill Ripjaws X 1600mhz | Corsair H80i Asus GTX 670 DCU II | Sandisk Extreme 120gb | Silverstone ST45SF-G | Silverstone SG-05
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/04/09 06:12:26
(permalink)
johnksss
hey, i didn't have that type of tape. that is looking real cool. where did you get that at?
it was covered with just a neoprene foam cutout.
but my chiller only went to 32F or 0C
That's not me. I got the pic from the Drewmeister chiller thread here: http://forums.extremeoverclocking.com/showthread.php?t=101902&page=14 Yea, I remember John...you always said back then that you don't have to be that cold.
post edited by Q56_Monster - 2010/04/09 06:15:08
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 
|
Re:Get It Colder......2
2010/04/09 08:26:45
(permalink)
Rudster816
I have reason to be Mr. Negative
http://s175.photobucket.c...50/rudster816/NOOO.png
That was at 4.9ghz, I tried for over an hour to get it stable, but my CPU kept getting tireder and tireder and it started failing quicker and quicker. I had to setting for 4.88ghz. Im going to try again tomorrow night.
http://s175.photobucket.c.../rudster816/Spi32m.png
sorry, but we're talking about on a reguglar basis and not just tonight... voklskier4452
regardless of whether or not rud went back to an XP install, 01 plain and simple isnt worth running on anything but a wolfdale, even running lower clock speeds and on a much weaker card I can outscore rud
this is true, but then again..depending on what card your benching....you still have a chance to place. and we all know that 2 points can move you anywhere from 1 place up to like 20. and i also posted my failed attempt at getting high marks with a 5870 and 01...never the less...i still gave it a shot. win/lose or draw. Q56_Monster
johnksss
hey, i didn't have that type of tape. that is looking real cool. where did you get that at?
it was covered with just a neoprene foam cutout.
but my chiller only went to 32F or 0C
That's not me. I got the pic from the Drewmeister chiller thread here: http://forums.extremeoverclocking.com/showthread.php?t=101902&page=14
Yea, I remember John...you always said back then that you don't have to be that cold.
yeah, we had to use different settings to stay competitive, but with what your working with...you'll be able to shed off allot of voltage..is what im thinking. so start with your best clocks then don't do anything but drop voltage untill unstable.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Rudster816
CLASSIFIED Member
- Total Posts : 4357
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re:Get It Colder......2
2010/04/09 08:49:08
(permalink)
johnksss
Rudster816
I have reason to be Mr. Negative
http://s175.photobucket.c...50/rudster816/NOOO.png
That was at 4.9ghz, I tried for over an hour to get it stable, but my CPU kept getting tireder and tireder and it started failing quicker and quicker. I had to setting for 4.88ghz. Im going to try again tomorrow night.
http://s175.photobucket.c.../rudster816/Spi32m.png
sorry, but we're talking about on a reguglar basis and not just tonight...
voklskier4452
regardless of whether or not rud went back to an XP install, 01 plain and simple isnt worth running on anything but a wolfdale, even running lower clock speeds and on a much weaker card I can outscore rud
this is true, but then again..depending on what card your benching....you still have a chance to place. and we all know that 2 points can move you anywhere from 1 place up to like 20.
and i also posted my failed attempt at getting high marks with a 5870 and 01...never the less...i still gave it a shot. win/lose or draw.
Q56_Monster
johnksss
hey, i didn't have that type of tape. that is looking real cool. where did you get that at?
it was covered with just a neoprene foam cutout.
but my chiller only went to 32F or 0C
That's not me. I got the pic from the Drewmeister chiller thread here: http://forums.extremeoverclocking.com/showthread.php?t=101902&page=14
Yea, I remember John...you always said back then that you don't have to be that cold.
yeah, we had to use different settings to stay competitive, but with what your working with...you'll be able to shed off allot of voltage..is what im thinking. so start with your best clocks then don't do anything but drop voltage untill unstable.
Delete pics after you quote them and I wont have anything to complain about 
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead
|
Re:Get It Colder......2
2010/04/09 09:11:56
(permalink)
nope..you might get amnesia later and we have to show you your ways... but you inspired me to do another run. went from 7.37 to 7.33 on superpi
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Rudster816
CLASSIFIED Member
- Total Posts : 4357
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
|
Re:Get It Colder......2
2010/04/09 09:33:50
(permalink)
rotflmao!
now that's the spirt!!
we get us a few more go get'ers like that and we might be able to hit 4k this month.
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/04/09 10:06:44
(permalink)
|
Re:Get It Colder......2
2010/04/09 11:05:27
(permalink)
Rudster, look at it this way. At least you have a D0..  Mhm I would like to try LN2 some time. But I don't think my mom will let me lol. I think I could get 5Ghz or really close to it with my C0.
post edited by Halo_003 - 2010/04/09 11:11:05
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/04/09 11:09:53
(permalink)
Halo_003
Rudster, look at it this way. At least you have a D0..
Not ALL D0's are better than all C0's. What voltage do you need for 4ghz stable on your C0? I need around 1.35v on my D0 for 4ghz stable.
|
Re:Get It Colder......2
2010/04/09 11:11:53
(permalink)
xxrabid93
Halo_003
Rudster, look at it this way. At least you have a D0..
Not ALL D0's are better than all C0's. What voltage do you need for 4ghz stable on your C0? I need around 1.35v on my D0 for 4ghz stable.
I need about 1.45Vcore for 4Ghz, and a little over 1.5V for 4.1-4.2. Which is why I think it'll do better on water.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
|
Re:Get It Colder......2
2010/04/09 12:05:34
(permalink)
Given to me by Ibuypower.com!! - Asus G752VS | 6820HK | 32GB | 2400Mhz | 17.3 G-Sync 75Hz | 1070N | 256 NVMe | 1 TB HD | DVDRW | AC Wifi Purchased from Ken@gentechpc - Sager NP9873/P870DM3-G | 6700K | 1080N SLI | 120Hz 94% | 256 OCZ RD400 | 16GB Corsair 3000 Mhz | Killer Wifi | 660W | TB3 | For sale: Sager NP9570 | 4960X | 980M SLI | 120hz Screen |2 256 SSD's | 16GB 2400 MHZ | AC-WIFI 1.3 Gbps | Blu-ray | 660W | AC-100 Quit jumping on examples as if they are topics. A favorite forum mistake.
|
Re:Get It Colder......2
2010/04/09 12:36:43
(permalink)
xxrabid93
Halo_003
xxrabid93
Halo_003
Rudster, look at it this way. At least you have a D0..
Not ALL D0's are better than all C0's. What voltage do you need for 4ghz stable on your C0? I need around 1.35v on my D0 for 4ghz stable.
I need about 1.45Vcore for 4Ghz, and a little over 1.5V for 4.1-4.2. Which is why I think it'll do better on water.
Oh wow. Ok. I thought your C0 was better than that (like around my D0). Nvm about that.
MHm... I wanna try it on DICE or water. I think that'll improve it a lot since it'll bring the temps WAY down.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
joeylasketti
SSC Member
- Total Posts : 813
- Reward points : 0
- Joined: 2008/03/09 14:28:33
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/04/09 17:29:45
(permalink)
voklskier4452
regardless of whether or not rud went back to an XP install, 01 plain and simple isnt worth running on anything but a wolfdale, even running lower clock speeds and on a much weaker card I can outscore rud
Yeah rudster wolfdale is the only way to run 01. I can score just shy of 100k with a single 5770 and an e8600. This benchmark just doesn't play well with anything else.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/04/09 19:05:24
(permalink)
I finally found some insulated tape at Lowes.   [link=][img][/img][/link]
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/04/09 19:07:28
(permalink)
mmmhummm... I have that very same roll... in my hand right now ;)
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/04/09 19:08:20
(permalink)
Question. I plasti-dipped the back of the mobo...can I cover the back of the cpu socket area with plasti-dip? 
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/04/09 19:36:15
(permalink)
every single thing. the thicker you put it on, the easier it comes off.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 3846
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/04/09 20:00:58
(permalink)
Ok thanks nate. One more question about plasti-dipping the GPU's. Do I plasti-dip over the warranty stickers and bios stickers? I wouldn't think so...or there goes my warranty.
Mobo: tbd CPU: tbd GPU: tbd RAM: tbd HD: tbd PSU: 2 x PC Power & Cooling 1200W OS: All of them Monitor: Whatever Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 10493
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 52
Re:Get It Colder......2
2010/04/09 20:08:36
(permalink)
|
xxrabid93
CLASSIFIED Member
- Total Posts : 2473
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/04/09 20:11:06
(permalink)
Put a peice of painters tape (or any low-tack tape) over the warranty stickers. I have seen people do that and the stickers be fine after plasti-dipping over them and then pulling up the plasti-dip later.
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:Get It Colder......2
2010/04/10 00:39:32
(permalink)
I don't know about you guys but the 480 looks better than I thought it would. Got my replacement 980x the other day. Though it still shows ridiculously low temps at idle and in bios (0C) this one overclocks a lot better. Been running some benches hovering around 5.0Ghz on ambient water. Now if I could get a video card that runs like it should.
post edited by awalleyeguy - 2010/04/10 00:42:27
|
