GeForce Forceware 295.73 64-bit WHQL

Page: < 12345.. > >> Showing page 4 of 9
Author
Post
Essentials Only Full Version
_Nite_
Insert Custom Title Here
  • Total Posts : 19183
  • Reward points : 0
  • Joined: 2007/04/18 15:35:04
  • Location: Sumner, Washington
  • Status: offline
  • Ribbons : 46
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 17:11:08 (permalink)
rblaes_99

so does everyone still uninstall and driversweep the old files before installing new drivers?  or are we past that to just installing overtop of the existing set?

I have done it both ways and don't seem to have issues either way.

 
I havn't had to do that since the later nvidia drivers now have a clean install check box, it works fine.
 
do a "customized" install and you will find it.

Gaming Rig: Intel Core i7 2600k @ 4.2Ghz - EVGA Z68 SLI - 16GB Corsair Vengeance DDR3 1600 - 64GB M4 SSD+1TB HD+2TB SSHD - 8GB GTX 1070 SC Black Edition - Asus Xonar DX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
 
#91
loveha
Omnipotent Enthusiast
  • Total Posts : 9919
  • Reward points : 0
  • Joined: 2009/09/26 01:51:22
  • Location: Beulah Michigan
  • Status: offline
  • Ribbons : 53
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 17:12:00 (permalink)
rblaes_99

so does everyone still uninstall and driversweep the old files before installing new drivers?  or are we past that to just installing overtop of the existing set?

I have done it both ways and don't seem to have issues either way.

I've done both, I honestly don't see a difference and have never had any issues. I still driver sweep just because I don't like old files hanging around.

Case: Corsair 900D
Motherboard: EVGA Z170 Classified E179
CPU: Intel Core i7 6700K 4.6GHz
RAM: 16GB Corsair DDR4 2133 16-15-15-36
GPU: EVGA GTX 1070 FTW DT SLI
PSU: EVGA 1000w G2
SSD: Samsung 512GB 950 Pro NVME M.2
Monitor: Acer Predator X34 100Hz G-Sync
Sound: Schiit Modi 2 DAC~Schiit Vali 2 Amp
Headphones: AKG K7XX Massdrop Edition

#92
James_L
CLASSIFIED Member
  • Total Posts : 4334
  • Reward points : 0
  • Joined: 2009/07/29 12:27:56
  • Status: offline
  • Ribbons : 45
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 17:25:55 (permalink)
loveha

rblaes_99

so does everyone still uninstall and driversweep the old files before installing new drivers?  or are we past that to just installing overtop of the existing set?

I have done it both ways and don't seem to have issues either way.

I've done both, I honestly don't see a difference and have never had any issues. I still driver sweep just because I don't like old files hanging around.

 
+1 to that. I do a CCleaner on the registry prior to installing the drivers just to get rid of any residual references which may not be reused. Just old habits which I really don't want to break at this point.

 
 

#93
Wily_One
SSC Member
  • Total Posts : 581
  • Reward points : 0
  • Joined: 2007/07/17 20:33:55
  • Location: 127.0.0.1
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 17:29:55 (permalink)
FattysGoneWild Anyone notice a older version of Physx comes with these drivers? Version 9.12.0209 Yet Nvidia has a newer release that came out today with the new drivers. Nvidia PhysX 9.12.0213 http://www.nvidia.com/obj...-9.12.0213-driver.html
I noticed it, but it's not uncommon.  PhysX and GeForce drivers have different development paths.  Since (almost?) nothing I run uses PhysX it's no big deal to me.

#94
Fiko0
SSC Member
  • Total Posts : 509
  • Reward points : 0
  • Joined: 2011/07/08 14:56:03
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 17:34:28 (permalink)
I am not really happy with this driver because i do get fps lag. Normally my gpu usage was always on 99% no matter what but now its dipping whole time from 99% to 70/80/85/90/95% why??
 
And i am using the new Afterburner beta.
 



#95
deezlit
Superclocked Member
  • Total Posts : 160
  • Reward points : 0
  • Joined: 2010/01/22 08:40:47
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 18:09:10 (permalink)
Everything installed smoothly and bf3 runs like a champ on ultra/high settings... 2x gtx 560 2gbs woot woot.

Alienware-14: Core i7-4700MQ, 16GB of RAM, gtx 765 2gb, 120gb ssd, Windows 7 Pro.

#96
shogon
CLASSIFIED Member
  • Total Posts : 2737
  • Reward points : 0
  • Joined: 2008/08/30 09:27:20
  • Location: Manteca (lard), CA
  • Status: offline
  • Ribbons : 7
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 18:09:57 (permalink)
I always boot into safe mode after uninstalling the video drivers in windows and use Driver Sweeper, then install the new drivers. Been following this guide since maniacvvv first created it.

I will either find a way, or make one.
 
 
 
٩(๏̯͡๏)۶
 
#97
headshawtz
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2009/11/25 08:17:04
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 18:28:40 (permalink)
Max Silencio

@headshawtz
You have the same problem as me. Did You solve it mean while?

@Nahte27
Could be an option, thanx. I will wait a bit and see if more SLI-user encounter this bug.

No i did not fix it, i have had this problem since 295 beta, so im still using 285.79 because they work best.
#98
shogon
CLASSIFIED Member
  • Total Posts : 2737
  • Reward points : 0
  • Joined: 2008/08/30 09:27:20
  • Location: Manteca (lard), CA
  • Status: offline
  • Ribbons : 7
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 19:36:03 (permalink)
slight improvement in 3d11
http://3dmark.com/compare/3dm11/2813373/3dm11/2765152

I will either find a way, or make one.
 
 
 
٩(๏̯͡๏)۶
 
#99
gatecrasher
SSC Member
  • Total Posts : 610
  • Reward points : 0
  • Joined: 2007/12/20 08:55:58
  • Status: offline
  • Ribbons : 1
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 19:48:52 (permalink)
All good signs are coming from this thread which is a change. Looks like I can install these at the weekend when I get time off.

Asus Rampage V Extreme
Intel i7 5960X
Avexir 16gb ram
EVGA Titan X
1 x Corsair Neutron GTX 120
Asus Xonar Xense
2 x 150 gig WD Velociraptors
Lian Li PcP80 Armoursuit
Platimax 1500
Full custom h20 cooled 


#100
shogon
CLASSIFIED Member
  • Total Posts : 2737
  • Reward points : 0
  • Joined: 2008/08/30 09:27:20
  • Location: Manteca (lard), CA
  • Status: offline
  • Ribbons : 7
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:00:21 (permalink)
I too am surprised how these are performing, going to a friends house and install these on his 480. Hope it works for him like it is me!

I will either find a way, or make one.
 
 
 
٩(๏̯͡๏)۶
 
#101
Dr Tone
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2010/06/17 17:52:08
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:03:25 (permalink)
Not sure what Nvidia is doing different with these drivers but my idle temperatures in SLI have dropped significantly.  20 degrees on the card with the display attached and 12 degrees on the other.
 
Awesome!  My whole machine runs significantly cooler now without all the heat generation.
 
 
I'm running 2x570SCs
#102
THX5334
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2009/07/04 06:16:57
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:15:48 (permalink)
Heard from a reliable source on another forum that Nvidia is working on a SLI profile fix for SWTOR and it is coming... But as they say, it's in Nvidia's hands.
 
I don't think anyone was expecting Bioware to make an SLI profile, but maybe see if there was any way to improve performance via a patch on their end.
 
Let me reiterate, these crashes never happened at all during the SWTOR beta with several hours of playing *and* Hi-Res textures enabled in the game.
 
So, while the majority of the responsibility does lay with Nvidia and an SLI profile, I can't believe that there's nothing Bioware could do on their end.
 
I'm sticking with the game.
 
Since there seems to be a lot of real BF3 warriors on here, anyone know of a good U.S./West Coast server that is on point with cheaters? I would love to get back into that game, but wasn't having fun with all the cheaters. Admittedly I haven't played it since before the last major update as I got sucked in pretty hard by SWTOR. So maybe it's all good now? Or at least better?
 
(I really don't understand men who cheat at videogames. Just like I don't understand men who pay for sex. And saying you pay her to go away doesn't count. It only counts if she wants to be there on her own out of desire. Just like a leaderboard score only counts if it's earned through play skills, and not hacks..)
 
Anxiously awaiting ME3, as it's the only thing that has got me itching to play besides SWTOR and cheat free BF3..
 
Good Times.

Current Main Rig:
I7 6900K cooled with Swiftech H240x  
EVGA X99 FTW-K 
Nvidia Titan X Pascal  
Samsung 250gb SSD / 500gb SSD 
16gb G-Skill DDR4 3200 
Corsair AX1200 PSU
Coolermaster Storm Trooper 
Logitech G910 Mechanical and G13 gameboards and Logitech G900 mouse
LG 4K 55" OLED556CP  
Windows 10 64Pro
NVidia Shield portable console
 
Current Mobile Rig:
Alienware 17" R3
I7 6700HQ, GTX 980m
4K Truelife screen
16gb DDR4 3200
Killer Wireless AC
EVGA 1080 Founders edition powered by Alienware Graphics Amplifier
#103
thePoison
FTW Member
  • Total Posts : 1005
  • Reward points : 0
  • Joined: 2008/06/02 16:18:03
  • Location: Indiana
  • Status: offline
  • Ribbons : 2
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:24:16 (permalink)
Control panel shows SLI and nvidia surround, restart and the menu option disappears, just like the beta drivers... booo nvidia.

Case: Lian-Li PC-V2120   
PSU: Seasonic X-1250
MB: ASUS Maximus IV        
CPU: Intel Core i7 2600k @ 4.6 GHz with Switech Apogee XT R2 
RAM: 8 GB Kingston (2x4GB) 1600 Mhz
GPU: Geforce 780 @ 1.15 GHz with Aquatuning  water blocks.       
OS: Win 8 x64 Pro                         
Driver: 326.80                         
Voltages: 1.33 CPU, 1.65v RAM
 Storage: 2 Samsung 840 Pros in Stripe + 1 TB WD Black Caviar  + 2 TB WD Black Caviar
#104
Deboe09
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2011/11/25 17:05:12
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:39:18 (permalink)
Im having issues trying to get this installed, well the graphics driver is installing just fine my issue is with physx.
I uninstalled everything in add/remove like I always have(physx first then graphics like mainiaxx guide says), and now in add/remove I dont see physx, but when I try to install the new driver, physx keeps failing becouse it says I have one installed still(9.11.0621)
I used a driver sweeper and even the driver sweeper doesnt see it anymore but it still shows in the new install that its there and continues to fail
#105
maniacvvv
Omnipotent Enthusiast
  • Total Posts : 9816
  • Reward points : 0
  • Joined: 2009/09/10 20:29:17
  • Location: Seattle WA
  • Status: offline
  • Ribbons : 159
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 20:58:36 (permalink)
Deboe09

Im having issues trying to get this installed, well the graphics driver is installing just fine my issue is with physx.
I uninstalled everything in add/remove like I always have(physx first then graphics like mainiaxx guide says), and now in add/remove I dont see physx, but when I try to install the new driver, physx keeps failing becouse it says I have one installed still(9.11.0621)
I used a driver sweeper and even the driver sweeper doesnt see it anymore but it still shows in the new install that its there and continues to fail


I suggest leaving the driver installed (as is), and then attempting a Custom install with the Graphics driver and Physx checked -and- clean install, right over the top and when its completely done, reboot
 
If that does not work, put back in the old driver you were using, this will rewrite the Physx entries.
Then follow the above method (overwrite) again using 295.73
 
 




#106
FattysGoneWild
CLASSIFIED Member
  • Total Posts : 2338
  • Reward points : 0
  • Joined: 2011/04/24 18:45:43
  • Location: KFC
  • Status: offline
  • Ribbons : 2
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 21:56:52 (permalink)
I want to make sure this is done properly. I have the new drivers installed. But, like I said earlier. The Physx version is older. The new one was released today. Do I just uninstall current Phyx. Followed by a reboot? Then install the updated version?

HP Envy Phoenix 810-430qe
OS: Windows 10 64 bit
MOBO: MSI Kaili2 Z97
CPU: Intel i7 4790K liquid cooling
RAM: 16GB DDR3 1600
GPU: EVGA GTX 1080 Founders Edition
PSU: EVGA SuperNOVA 650 P2
SSD: Samsung 256GB MZ7TE256HMHP
HDD: 2TB Seagate Barracuda ST2000DM001
Sound: Logitech Z623 THX 2.1 Speakers
Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display
Keyboard: Razer Blackwidow Chroma
Mouse: Razer DeathAdder Chroma
EVGA Affiliate Code: C3OXU3I2N9
 
 
#107
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 10929
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 57
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 22:50:10 (permalink)
FattysGoneWild

I want to make sure this is done properly. I have the new drivers installed. But, like I said earlier. The Physx version is older. The new one was released today. Do I just uninstall current Phyx. Followed by a reboot? Then install the updated version?

Nah, just install the new PhysX over the old one. You don't even need to reboot.

EVGA E758/i7 980x 4.3ghz 1.36v
12GB Corsair Dominator 2000C9
GTX 980Ti w/GTX TITAN SC for PhysX
Crucial M4 512GB SSD/2x WD RE4 Black 2TB 
Corsair H50 Cooler/Corsair AX1200/Window 10 Pro
#108
davevt31
SSC Member
  • Total Posts : 952
  • Reward points : 0
  • Joined: 2008/10/05 10:33:26
  • Location: Johnstown, NY
  • Status: offline
  • Ribbons : 5
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/21 23:23:58 (permalink)
I noticed when I fired up BC2 my resolution was off.  Went to change it back and it had the 119Hz option instead of my normal 120.  Had this in the past, not a big deal just haven't had that issue in quite a while.

   
     
#109
_Nite_
Insert Custom Title Here
  • Total Posts : 19183
  • Reward points : 0
  • Joined: 2007/04/18 15:35:04
  • Location: Sumner, Washington
  • Status: offline
  • Ribbons : 46
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 00:29:38 (permalink)
davevt31

I noticed when I fired up BC2 my resolution was off.  Went to change it back and it had the 119Hz option instead of my normal 120.  Had this in the past, not a big deal just haven't had that issue in quite a while.

 
thats not uncommon, some of my games will set back to default or auto detect settings when new drivers are detected.

Gaming Rig: Intel Core i7 2600k @ 4.2Ghz - EVGA Z68 SLI - 16GB Corsair Vengeance DDR3 1600 - 64GB M4 SSD+1TB HD+2TB SSHD - 8GB GTX 1070 SC Black Edition - Asus Xonar DX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
 
#110
malVizio
CLASSIFIED Member
  • Total Posts : 2392
  • Reward points : 0
  • Joined: 2011/09/26 10:24:30
  • Location: Affiliate code: A83U9ZY5VO
  • Status: offline
  • Ribbons : 7
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 00:54:18 (permalink)
On BF3 and 3dmark they run very good to me!
unistalled using Driver Sweeper, reboot install!
seems very very good drivers...still got to try on skyrin and other games! 

Case:Corsair Obsidian 650D
M.B.:ASRock Z68 Ext7 Gen3/PSU: Seasonic-X 850W Gold
GPU:2xEVGA GTX680 2GB/RAM:16GB DDR3 Corsair
CPU:Intel i5 2500k@4.6Ghz+Zalman CNPS9900 MAX
FANS:3xBitFenix Spectre PRO RedLed
SSD/HDD:OCZ Agility 3 60gb/Samsung 840 250gb/WD Raptor 300gb/Seagate Barracuda 500mb
MICE:Corsair M60/KB:Razer BlackWidow/HP:Roccat Kave 5.1/Shure SRH440
Screen:BenQ XL2420T+Asus PA238Q
#111
Orange_1050
FTW Member
  • Total Posts : 1181
  • Reward points : 0
  • Joined: 2011/10/10 00:48:32
  • Status: offline
  • Ribbons : 3
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 03:39:30 (permalink)
Works ok for me.
Jumped from 295.51 to 295.73
Had a small performace boost in 3Dmark11 from P9460 to P9515.
The artifacts I have in some games are still there.
 


My Virgin Prime: 433*2^2188076+1 (658680 digits)
 
#112
kcuestag
ACX Member
  • Total Posts : 385
  • Reward points : 0
  • Joined: 2012/01/25 11:34:59
  • Location: Madrid, Spain
  • Status: offline
  • Ribbons : 2
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 05:11:36 (permalink)
Anyone here using a 3-Way SLI with these drivers? I'd like to know how they work for you.
 
I get these random GPU usage drops which of course means my fps drop well below 60fps for no reason, and 285.62 WHQL runs perfectly fine.
 
What number should I be running on the renderaheadlimit of the user.cfg file on Battlefield 3 folder? I think default is 3, I will try 0 and others now, maybe that's the issue.
 
So far reeally dissapointed at these drivers with my 3-Way SLI, even though I really wanted them for other games like Skyrim and Batman AC. :(

EK Supreme HF Plexi + 2x Heatkiller GPU-X³ 79X0 Ni-Bl + HWLabs Black Ice SR1 420mm + HWLabs Black Ice GTS 240
XSPC EX120 Low Noise + XSPC Dual Bay Acrylic + Laing D5 + 6x Nidec GT1850 + 3x Noctua NF-A14 FLX
FiiO E7 DAC + FiiO E9 AMP + Beyerdynamic DT-770 PRO (250 OHM)
 
#113
AVictorD
Superclocked Member
  • Total Posts : 115
  • Reward points : 0
  • Joined: 2011/01/29 00:02:02
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 1
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 05:12:01 (permalink)
So far so good!! Now a workable SLI configuration compared to the previous released betas. The identifcation of multiple monitors for Surround works very well for Quad SLI.
3D has some funnies when applying config changes, but got it to eventually work.
Noticable improvement on the games as well.
 
The PhysX did fail and simply ran the .msi file from the install directory (as pointed out by Heavy in his comment):
C:\NVIDIA\DisplayDriver\295.73\WinVista_Win7_64\English\PhysX\PhysX_9.12.0209_SystemSoftware.msi 
#114
kcuestag
ACX Member
  • Total Posts : 385
  • Reward points : 0
  • Joined: 2012/01/25 11:34:59
  • Location: Madrid, Spain
  • Status: offline
  • Ribbons : 2
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 05:49:06 (permalink)
Answering to my own post above, I went back to 295.73 WHQL now (from 285.62 WHQL) and now I don't seem to have any issues.
 
Played Conquest Large Metro and Sharki Peninsula and got a steady 64fps all the time.
 
Will test more later, right now I'm using the renderaheadlimit 0 in the user.cfg file of the BF3 folder, seems to run pretty good.
 
If nothing goes wrong today then I'll leave it at 0. :)
 
 
Max vram I saw in Sharki Peninsula was like 1170MB, maniac, do you recommend me setting the texture back from High to Ultra?
 
 

EK Supreme HF Plexi + 2x Heatkiller GPU-X³ 79X0 Ni-Bl + HWLabs Black Ice SR1 420mm + HWLabs Black Ice GTS 240
XSPC EX120 Low Noise + XSPC Dual Bay Acrylic + Laing D5 + 6x Nidec GT1850 + 3x Noctua NF-A14 FLX
FiiO E7 DAC + FiiO E9 AMP + Beyerdynamic DT-770 PRO (250 OHM)
 
#115
Fiko0
SSC Member
  • Total Posts : 509
  • Reward points : 0
  • Joined: 2011/07/08 14:56:03
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 06:06:25 (permalink)
Can somebody help me please?


#116
enigma96
SSC Member
  • Total Posts : 590
  • Reward points : 0
  • Joined: 2007/05/01 17:05:13
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 07:13:36 (permalink)
I'm getting really bad micro stutter with these drivers dam it :-(

Intel I7 4790
16GB Corsair
Evga Gtx 780 Ftw
Msi Z97 5                                                  
Samsung 840 Pro
Corsair Ax760
Asus PB278Q
Fractal R4
#117
illutian
Superclocked Member
  • Total Posts : 129
  • Reward points : 0
  • Joined: 2010/08/05 16:33:45
  • Location: USA
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 07:18:31 (permalink)
Here's hoping this set doesn't BSoD like the previous set. :\

"Our greatest glory is not in never falling but in rising everytime we fall." - Confucius
       

#118
Deboe09
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2011/11/25 17:05:12
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 08:55:21 (permalink)
maniacvvv

Deboe09

Im having issues trying to get this installed, well the graphics driver is installing just fine my issue is with physx.
I uninstalled everything in add/remove like I always have(physx first then graphics like mainiaxx guide says), and now in add/remove I dont see physx, but when I try to install the new driver, physx keeps failing becouse it says I have one installed still(9.11.0621)
I used a driver sweeper and even the driver sweeper doesnt see it anymore but it still shows in the new install that its there and continues to fail


I suggest leaving the driver installed (as is), and then attempting a Custom install with the Graphics driver and Physx checked -and- clean install, right over the top and when its completely done, reboot

If that does not work, put back in the old driver you were using, this will rewrite the Physx entries.
Then follow the above method (overwrite) again using 295.73



 
I tried both of these and nothing is working, When trying to install the old driver I was using, the option to install Physx doesnt even show up so I cant check or uncheck it.
Ive gone thru safe mode with driver sweeper and ccleaner and it still says physx is still there, and when I try to run the physx installer from the install directory I keep getting an error, Error 1327. Invalid Drive E:\
This is driving me nuts, I've never had so much trouble with a graphics driver before :/
#119
Wily_One
SSC Member
  • Total Posts : 581
  • Reward points : 0
  • Joined: 2007/07/17 20:33:55
  • Location: 127.0.0.1
  • Status: offline
  • Ribbons : 0
Re:GeForce Forceware 295.73 64-bit WHQL 2012/02/22 09:29:58 (permalink)
Are you trying to install PhysX in Safe Mode?  If so, you can't.  PhysX requires MSI which isn't available in Safe Mode.  Read the Release Notes.
 
But you can (re)install or remove PhysX at any time from normal Windows mode.
#120
Page: < 12345.. > >> Showing page 4 of 9
Jump to:
  • Back to Mobile