Well, so here they are
 
I am off to read the release notes and then install.
I got alot more than my fingers crossed
 
Will report back later
 
*Here are the Release notes
http://us.download.nvidia.com/Windows/295.73/295.73-Win7-WinVista-Desktop-Release-Notes.pdf

I'm just hoping that this fixed the black screen bug with SLI and Shogun 2 on DX11. It only cropped up in the last few betas, and it's been kinda frustrating to know that my little computer with a single 580 GPU can handle the game just fine, but my big computer with 3 GPUs and a 980x crashes the second I set the game to ultra settings.
 
Also, any word if this fixed the crash related to having a Surround monitor setup and getting reduced system performance overall? Or is that something caused by the CPU bottlenecking the GPUs? I've been holding off OCing my 980 since getting my computer up and running after my last mobo fried...that, and I went from the Classy to the Classy 3 and I'm nervous about what settings to plug in.

I just ran 3DMark test and scored a 10559 as opposed to a 10445 with the previous beta driver. For what that's worth. :)
 
Is it just me or are these drivers running slightly warmer at idle temps? 
 

morphaus

THX5334

I'm really disappointed there's still no proper SLI profile for SWTOR.

And Nvidia and Bioware's refusal to acknowledge this problem, is really taking my patience and good will to its limit.

The game ran fine in beta, but ever since launch it's the same issue. Which goes exactly as another Quad SLI 590 user said in a 590 owners/enthusiast forum:

Shinobi Jedi, i'm getting crushes too. and right after crash only one of four GPUs continue to "work", other 3 sit at 0% load, 0.875v and nothing can make them work again except reboot. it happens roughly after 2-2.5 hours of playing and first symptoms are dissapearing textures

This is exactly what has been happening to me since the launch of this game. And to be clear, this didn't happen at all during the beta when Hi-Res textures were enabled.

This is the only game I have issues on. Everything else runs 120fps on full blast on every game, except the highest setting in Witcher 2 for AA. BF3, Skyrim, Batman - games with more complex graphics - all run better than SWTOR.

I have never OC'd these cards, I don't mess with voltages, they have been a dream except for SWTOR..

I'm ready to walk away from this game, and I'm not an MMO guy, but got into it as a Star Wars geek.  If BF3 wasn't running so rampant with cheaters, I would've already...


So I guess what I'm getting at is -

Jacob, can we get the EVGA SLI Enhancement Pimp-Jedi's to write us 590 owners, or any other SLI users experiencing this issue, a proper SLI profile for SWTOR?

After all, you guys seem to be the only ones that get the job done...

Thanks for your time and consideration, and anyone else reading, for allowing me to rant/vent on this issue.

Cheers!

SWTOR is that bad i got this, 

This infraction is worth 1 point(s) and may result in restricted access until it expires. Serious infractions will never expire.

Original Post:
http://www.swtor.com/community/showthread.php?p=3006667

Quote:


Driver's do help, if you on nvidia, could you please report here,

New driver's is out ? thanks kind regards

http://www.swtor.com/community/showt...94#post3006394

All the best,
STAR WARS: The Old Republic     a fraction point for this,
All i wont to do is come back to the game, and get censored,  Things are really bad over there..

Driver atm dont do anything for SWTOR, trying to get more info, but being censored, /confused


Mods please move if needed, But talking about driver on SWtor get your points . :?

Just unsub like the rest of us did, the game is junk!

maniacvvv

Well, so here they are

I am off to read the release notes and then install.
I got alot more than my fingers crossed

Will report back later

*Here are the Release notes
http://us.download.nvidia.com/Windows/295.73/295.73-Win7-WinVista-Desktop-Release-Notes.pdf

I got all my fingers crossed for you too, Maniac :))) Give us some good news.

*EDIT*
 
Overreacted and fixed with reinstall

I just installed the new drivers and ran the benchmark on Batman AC and the new drivers made no difference for Physx and DX11. The frame rate still blows.
Minimum 28fps with Physx on normal, no DX11.
Minimum 16fps with no Physx and DX11 on extreme and normal.
I don't even want to know what it would be with both enabled.
With everything set to extreme with no Physx or DX11, I get a minimum of 64fps.
Specs:
1100T black edition 3.3Ghz, turbo 3.7Ghz
4gig ram 1066
GTX560 Ti 448 core
X-Fi extreme gamer
Windows 7 32bit
1440x900

@ maniacvvv
 
TX for the heads up on the Beta 14 ;)
 
You can enable framerate monitoring again. :D

it is telling me the drivers are not compatible with my version of windows. LOL fail

Not many fixes published in release notes. I wonder if Nvidia is being hush hush and have made a lot of changes. Just not being published. They installed fine for me.

Yes, some very positive changes for BF3
I will be posting in-depth testing results in a few days in my BF3 Guide

maniacvvv
*EDIT, AB installed and first test pass in 11

...that kinda looks like a drop in your 3dMark score, though?  (At least, compared to the result on your Mods Rigs profile)

xanderf

maniacvvv
*EDIT, AB installed and first test pass in 11

...that kinda looks like a drop in your 3dMark score, though?  (At least, compared to the result on your Mods Rigs profile)

LOL
 
The score in my Mods rigs has the GPU's overclocked at 900
The testing today is all at STOCK cores are at 772 
 

emach

So am I the only one who can't get surround working?

You might want to read over the release notes, there are some Surround issues and config details covered for this latest driver set
 
http://us.download.nvidia.com/Windows/295.73/295.73-Win7-WinVista-Desktop-Release-Notes.pdf

After the nightmare I had with the last WHQLs I'm really hoping for some good stability + Skyrim improvements with this one. Will try and report back later.