OK folks, I am now folding 40-46k PPD on WU 7005 for the CPU and beta units!!!  2600K 100% 8 cores.  GTX680 still chugging along at 20k+ PPD... hoping for a new client soon.

Thanks for the BR!
  
 

Awesome...thanks SP.
 
I want me some 7xxx wu's 

That 7xxx was for the CPU, had the wrong ID slot highlighted 

wrinvert

so wants that 680 avging for sure then 20k or 20k+?

It's a preliminary "fix" for it to fold something... not getting actual output at the moment.........

22K PPD is pretty darn good for that card, especially since it doesnt even have a client or drivers that really support it.
 
If it was able to fold on a 803x project, it would probably fold for just about 30K overclocked.
 
So we can tell it is actually getting more PPD then any of the other cards.

I configured V7 in the manner described, and keep getting memtest errors. Specifically:
13:11:50:WU00:FS00:0x15:Client config unavailable.
13:11:50:WU00:FS00:0x15:Finished fah_main status=59
13:11:50:WU00:FS00:0x15:mdrun_gpu returned 59
13:11:50:WU00:FS00:0x15:GPU memtest failure
13:11:50:WU00:FS00:0x15:
13:11:50:WU00:FS00:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
13:11:50:WU00:FS00:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
 
Running the console version with  -forcegpu nvidia_fermi -betateam results in:
[13:13:11] Client config found, loading data.
[13:13:11] Finished fah_main status=59
[13:13:11] mdrun_gpu returned 59
[13:13:11] GPU memtest failure
[13:13:11]
[13:13:11] Folding@home Core Shutdown: GPU_MEMTEST_ERROR
 
Do I have a bad card, or am I missing something?

The programs fail to recognize the card. Either no CUDA hardware detected, or No OpenCL platforms detected.
 
Any hints, or flags that might help it initialize?

crezno

22K PPD is pretty darn good for that card, especially since it doesnt even have a client or drivers that really support it.

If it was able to fold on a 803x project, it would probably fold for just about 30K overclocked.

So we can tell it is actually getting more PPD then any of the other cards.

 
not true depends on WU
my gtx 570 does 24Kish on the 3,843 points units
but it does around 18k on the 7718 points units, gpu load is around 85% on those WU

Just got mine setup the correct way took me a few tries though anyways I'm pulling about 21k ppd on the 680 right now which is about what most people are getting right now.

Thanks for the guide I wouldn't have gotten it to work with out it

troy8d

Following this guide you can get approximately 10k PPD more on the 680:

http://hardforum.com/showthread.php?t=1685648

Well played troy... well played

anon72c

Clean driver install didn't work, but after completely removing and reinstalling both the driver and V7, I'm finally in business.

Way to go staypuft!

Nice , glad you got it going... fold on

I'm running 3-way SLI 680's and getting 73745 PPD.. is this accurate?

staypuft

bolts4brekfast

I'm running 3-way SLI 680's and getting 73745 PPD.. is this accurate?

24851 per card is excellent!  What are your clocks?

132% power target
+130 clock offset (1228Mhz)
+360 memory offset (6732Mhz)

Alright, the issue that I'm having seems to be time dependent.
 
During the week, the card can only fold from the evening until morning EST. This past weekend, I was able to fold on both the GK104 and GK114 slots without any interruptions, only to have the problem return Monday morning.
 
It does not seem to coincide with any processes/updates/services on the machine, as far as I can tell.
 
Has anyone else had similar problems?