Re:GPUs for Afterburner
2010/02/06 12:30:53
(permalink)
|
Re:GPUs for Afterburner
2010/02/06 22:14:47
(permalink)
What happened guys? Our production got hurt badly today... I see there was no update at 3pm but it didn't compensate later...  Let's see tomorrow... Fold on!!!
|
Re:GPUs for Afterburner
2010/02/06 23:26:02
(permalink)
I finally got all 4 gpu's to read as monitors and was able to extend them to the desk top, but the problem I've been having all day is to get two of the cores to start working. They all load in the tray fine and I have been able to load them in FAHMON, but apparently there's some issue with them connecting the server. The other two cores work fine.
W7 64, EVGA X58 4-way SLI, I7 980x , EVGA GTX 780SC 2x, Corsair Dominator DDR3 2000 12GB, Samsung 840 Pro 256GB SSD, WD Velociraptor 1TB, HT Omega eClaro, Corsair AX1200W, Asus VG248QE-Glossy (thanks to CallsignVega @ Overclock.net) 3x Surround
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/07 00:19:56
(permalink)
theGryphon
What happened guys? Our production got hurt badly today... I see there was no update at 3pm but it didn't compensate later... Let's see tomorrow...
Fold on!!!
Yeah, I'm not sure what's going on. This is really disappointing. I did get my 3 CPU clients changed over, givin' her all I can cap'n! @ ILikeBeans, thanks for Folding and switching them all over! I'm not sure what the connection issue could be, but if you haven't asked about it in your other thread, I definitely would. Someone good with the most advanced GPU Folding setups should be able to tell you.
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
lonewolf218
CLASSIFIED Member
- Total Posts : 3311
- Reward points : 0
- Joined: 2008/02/10 05:18:55
- Status: offline
- Ribbons : 13
Re:GPUs for Afterburner
2010/02/07 11:36:25
(permalink)
I'm still giving it all I have, but I lost about 12 hours of sending/receiving wu's when moose decided to "improve" our home network.
Yes, he broke something again lol
|
krane
CLASSIFIED Member
- Total Posts : 4359
- Reward points : 0
- Joined: 2007/02/11 18:51:15
- Location: Brooklyn, NY
- Status: offline
- Ribbons : 14
Re:GPUs for Afterburner
2010/02/07 11:38:46
(permalink)
lonewolf218
I'm still giving it all I have, but I lost about 12 hours of sending/receiving wu's when moose decided to "improve" our home network.
Yes, he broke something again lol
Well we know, Whatever moose "breaks" he can "fix" lol
i7 5820K | EVGA x99 micro |Corsair H100i | 32GB DDR4 Crucial Ballistix Sport | 2-EVGA GeForce GTX 970 SSC in SLI | EVGA SuperNOVA 1050 GS PS | Win 10 pro 64 bit | Corsair Obsidian 350D Affiliate Code: PPZ-BV2-N9LE Heatware
|
heydabop
SSC Member
- Total Posts : 727
- Reward points : 0
- Joined: 2009/03/04 14:45:12
- Status: offline
- Ribbons : 0
Re:GPUs for Afterburner
2010/02/07 12:45:45
(permalink)
lonewolf218
I'm still giving it all I have, but I lost about 12 hours of sending/receiving wu's when moose decided to "improve" our home network.
Yes, he broke something again lol
XD Gotta love that kind of improvement. warthorn
theGryphon
What happened guys? Our production got hurt badly today... I see there was no update at 3pm but it didn't compensate later... Let's see tomorrow...
Fold on!!!
Yeah, I'm not sure what's going on. This is really disappointing.
I did get my 3 CPU clients changed over, givin' her all I can cap'n!
@ ILikeBeans, thanks for Folding and switching them all over! I'm not sure what the connection issue could be, but if you haven't asked about it in your other thread, I definitely would. Someone good with the most advanced GPU Folding setups should be able to tell you.
Bleh, I feel bad for not folding now. All my clients have been off for a couple days. I've been doing animations and smoke simulations, kinda lousy excuse though since I can do this after the 16th. I'll bring both the GPU clients back up (~12K PPD), and perhaps the CPU client depending on how this animation goes. Tho the CPU client with A3 WU's is low PPD without a passkey.
|
FlipBack
FTW Member
- Total Posts : 1244
- Reward points : 0
- Joined: 2009/06/22 05:56:46
- Status: offline
- Ribbons : 5
Re:GPUs for Afterburner
2010/02/07 13:19:56
(permalink)
Part of that PPD loss is that I switched my CPU client backover to my name so that I can be eligible for bonuses at the start of the next promo year. I am worried that I will not be able to make it easily with my ~7000 PPD, although I do hope to get a GTX 480 and a bigadv rig up this year.
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/07 13:28:00
(permalink)
lonewolf218
I'm still giving it all I have, but I lost about 12 hours of sending/receiving wu's when moose decided to "improve" our home network.
Yes, he broke something again lol
 FlipBack
Part of that PPD loss is that I switched my CPU client backover to my name so that I can be eligible for bonuses at the start of the next promo year. I am worried that I will not be able to make it easily with my ~7000 PPD, although I do hope to get a GTX 480 and a bigadv rig up this year.
No problem, although be aware all the points you're accumulating between now and the 15th don't count toward the promotion. Most work units only take a few hours so even being cautious you could always switch over on the 14th and not lose a single beat.
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
KMoore4318
Pistoj Doulos Unum Pluribus
- Total Posts : 17828
- Reward points : 0
- Joined: 2008/12/04 04:20:57
- Location: Atlanta, Ga
- Status: offline
- Ribbons : 233
Re:GPUs for Afterburner
2010/02/07 13:35:52
(permalink)
Strange I switched 2 GPU's ovet to him, and recived EUE errors and stop for 24 hours on the two I switched , but no error on the two I left in my name ?
post edited by KMoore4318 - 2010/02/07 17:02:54
  Just clink Link to Register > My Affiliate Code:VTJPDC4OMB 1)965 V-8 E758(77)580 AX1200 2)980 NH-U12P-SE E761(77)2(980) AX1200 3)980X H-70 E770 (77)2(590) AX1200 4)980X H-70 E762(77)2(580) AX1200 5)920 EVGA Super Cooler E756(82)590 HX1000 6)680I 2(560-ti) HX1000W
|
FlipBack
FTW Member
- Total Posts : 1244
- Reward points : 0
- Joined: 2009/06/22 05:56:46
- Status: offline
- Ribbons : 5
Re:GPUs for Afterburner
2010/02/07 13:50:42
(permalink)
warthorn
FlipBack
Part of that PPD loss is that I switched my CPU client backover to my name so that I can be eligible for bonuses at the start of the next promo year. I am worried that I will not be able to make it easily with my ~7000 PPD, although I do hope to get a GTX 480 and a bigadv rig up this year.
No problem, although be aware all the points you're accumulating between now and the 15th don't count toward the promotion. Most work units only take a few hours so even being cautious you could always switch over on the 14th and not lose a single beat.
I need to make sure I return 10 work units before then in order to not 'miss a beat.' As soon as I get the tenth in I'll flip it back.
|
KMoore4318
Pistoj Doulos Unum Pluribus
- Total Posts : 17828
- Reward points : 0
- Joined: 2008/12/04 04:20:57
- Location: Atlanta, Ga
- Status: offline
- Ribbons : 233
Re:GPUs for Afterburner
2010/02/07 19:28:32
(permalink)
KMoore4318
Strange I switched 2 GPU's ovet to him, and recived EUE errors and stop for 24 hours on the two I switched , but no error on the two I left in my name ?
Update, I switched them back to my name and they are running now without error, I'll try switching again tomorow morning and see how it goes, I just do not understand how switching user name can make a differance.
Just clink Link to Register > My Affiliate Code:VTJPDC4OMB 1)965 V-8 E758(77)580 AX1200 2)980 NH-U12P-SE E761(77)2(980) AX1200 3)980X H-70 E770 (77)2(590) AX1200 4)980X H-70 E762(77)2(580) AX1200 5)920 EVGA Super Cooler E756(82)590 HX1000 6)680I 2(560-ti) HX1000W
|
Re:GPUs for Afterburner
2010/02/07 19:49:28
(permalink)
I wish I could fold 24/7... Then I could bring in around 20k ppd for AB.. And I'd have hit 1 million by now.. Stupid power bill.
Desktop: i7 3820 - ASUS X79 Sabertooth TUF - 4x4GB G.Skill TridentX 2400C9 - EVGA GTX 580 Classified ULTRA Hydro Copper Microsoft Surface Pro 4: i7 6650U - 16GB RAM - 256GB SSD - Sennheiser HD 598 - DualShock 4 Controller
|
Re:GPUs for Afterburner
2010/02/07 20:26:00
(permalink)
I have two GPU's, for now, putting out almost 9000 ppd ea. so far. At least they will be running 24/7 if I can't get more going.
W7 64, EVGA X58 4-way SLI, I7 980x , EVGA GTX 780SC 2x, Corsair Dominator DDR3 2000 12GB, Samsung 840 Pro 256GB SSD, WD Velociraptor 1TB, HT Omega eClaro, Corsair AX1200W, Asus VG248QE-Glossy (thanks to CallsignVega @ Overclock.net) 3x Surround
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/08 07:56:41
(permalink)
Looks like you guys are slowly lifting the PPD back up. Should hit 7,000,000 in a few hours 
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
Re:GPUs for Afterburner
2010/02/08 08:50:03
(permalink)
|
Re:GPUs for Afterburner
2010/02/08 15:20:02
(permalink)
I have two gpu's and now two cpu's working full blast thanks to Horvat and WD. Still working on the other two GPU's but think I might get it going later 
W7 64, EVGA X58 4-way SLI, I7 980x , EVGA GTX 780SC 2x, Corsair Dominator DDR3 2000 12GB, Samsung 840 Pro 256GB SSD, WD Velociraptor 1TB, HT Omega eClaro, Corsair AX1200W, Asus VG248QE-Glossy (thanks to CallsignVega @ Overclock.net) 3x Surround
|
DutchForce
CLASSIFIED Member
- Total Posts : 2282
- Reward points : 0
- Joined: 2006/12/04 14:25:44
- Location: Netherlands
- Status: offline
- Ribbons : 46
Re:GPUs for Afterburner
2010/02/08 16:50:21
(permalink)
Thanks for all your effort to fold for AB, ILikeBeans ... and thanks to you and all others we have hit the 7 Million Milestone !!!  FOLD ON everyone !!!
  Folding Rig: Lian-Li PC-P50 | Corsair HX850 | MSI 890FXA-GD70 | AMD X4-965 BE | GTX980 Ti SC & GTX1070 SC
|
Horvat
CLASSIFIED Member
- Total Posts : 3838
- Reward points : 0
- Joined: 2009/06/16 12:35:24
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re:GPUs for Afterburner
2010/02/08 17:58:49
(permalink)
Hey you guys folding gpu clients that are EUE'ing when you changed the folding names, did you remove YOUR passkey that is specific to YOUR folding name? That is most likely the problem. The Stanford server is trying to match the passkey to the folding name and when it cannot,(your passkey and his folidng name) it is going to come back with an error.
|
darkinfero
FTW Member
- Total Posts : 1517
- Reward points : 0
- Joined: 2006/07/27 07:07:13
- Location: peabody,ma
- Status: offline
- Ribbons : 7
Re:GPUs for Afterburner
2010/02/08 19:27:01
(permalink)
switching my ps3 and all my pcs over can't switch the netbook not enough time I want him to go to 10 million at the rate were going it not going to happen Makes me smile at this team effort edit stupid pass key on the smp2 client I switch over the gpu2 and the ps3 already
post edited by darkinfero - 2010/02/08 20:12:42
  
 XPS 730x I7 920 C0 3.96 stable EVGA GTX 260 216 XPS M1530
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/08 20:43:48
(permalink)
Thanks for the help everybody  I updated the first page w/ the 7mil banner. We're going to need a LOT more help to hit 10,000,000 in 5 days...
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
Re:GPUs for Afterburner
2010/02/08 21:33:35
(permalink)
15th included, we have exactly 7 days to go. At this rate, we're looking at 8 million... We need more folding power!
|
Re:GPUs for Afterburner
2010/02/08 21:38:13
(permalink)
☄ Helpful
|
Barbarossa
CLASSIFIED ULTRA Member
- Total Posts : 5316
- Reward points : 0
- Joined: 2008/01/28 11:43:24
- Status: offline
- Ribbons : 25
Re:GPUs for Afterburner
2010/02/09 03:32:01
(permalink)
Sorry, I´m late to the party , but I just got home and turned on 2 260s for AB
|
heydabop
SSC Member
- Total Posts : 727
- Reward points : 0
- Joined: 2009/03/04 14:45:12
- Status: offline
- Ribbons : 0
Re:GPUs for Afterburner
2010/02/09 09:08:40
(permalink)
Barbarossa
Sorry, I´m late to the party,
but I just got home and turned on 2 260s for AB
Ah, it was your vacation time. Lol. And better late than never.
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/09 15:25:27
(permalink)
heydabop
Barbarossa
Sorry, I´m late to the party,
but I just got home and turned on 2 260s for AB
Ah, it was your vacation time. Lol.
And better late than never.
+1 Also, having a personal problem w/ my machine. Tested CPU/RAM w/ LinX 10-pass and no problems (I've been running stock w/ mem @ manuf. specs, 1866; now RAM is underclocked to 1066) and ran Furmark to test GPU. GPU client by itself causes no problems. But if I run my 3 CPU clients (3x 2-core VMware) anywhere from 10 minutes to a few hours later my machine gives the "busy mouse" signal, then I stop being able to select anything, and finally the screen just freezes (never blacks out, no BSODs, etc). My HDD spins normally, I can still hear music if it was playing, etc... I've lost numerous WUs because of this in the last 2 days. Any advice?
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
darkinfero
FTW Member
- Total Posts : 1517
- Reward points : 0
- Joined: 2006/07/27 07:07:13
- Location: peabody,ma
- Status: offline
- Ribbons : 7
Re:GPUs for Afterburner
2010/02/09 17:13:35
(permalink)
warthorn
heydabop
Barbarossa
Sorry, I´m late to the party,
but I just got home and turned on 2 260s for AB
Ah, it was your vacation time. Lol.
And better late than never.
+1
Also, having a personal problem w/ my machine. Tested CPU/RAM w/ LinX 10-pass and no problems (I've been running stock w/ mem @ manuf. specs, 1866; now RAM is underclocked to 1066) and ran Furmark to test GPU. GPU client by itself causes no problems. But if I run my 3 CPU clients (3x 2-core VMware) anywhere from 10 minutes to a few hours later my machine gives the "busy mouse" signal, then I stop being able to select anything, and finally the screen just freezes (never blacks out, no BSODs, etc). My HDD spins normally, I can still hear music if it was playing, etc... I've lost numerous WUs because of this in the last 2 days. Any advice?
Is it a USB mouse? Maybe try a different mouse Rebuild the VM I thinking if it's not the Memory and you ran MemTest Then it has to do with the VM causing the windows kernel to crash Edit forgot to add to see the BSOD right click on my Computer or computer I guessing your running Vista or 7 click on advance system options You see Start-up and recovery click on the setting under it Under system failure Un-check automatically restart
post edited by darkinfero - 2010/02/09 17:19:32
XPS 730x I7 920 C0 3.96 stable EVGA GTX 260 216 XPS M1530
|
warthorn
CLASSIFIED Member
- Total Posts : 3280
- Reward points : 0
- Joined: 2007/07/19 15:54:30
- Status: offline
- Ribbons : 44
Re:GPUs for Afterburner
2010/02/09 17:47:37
(permalink)
darkinfero
Is it a USB mouse? Maybe try a different mouse
Rebuild the VM
I thinking if it's not the Memory and you ran MemTest
Then it has to do with the VM causing the windows kernel to crash
Edit forgot to add to see the BSOD
right click on my Computer or computer
I guessing your running Vista or 7
click on advance system options
You see Start-up and recovery
click on the setting under it
Under system failure
Un-check automatically restart
It is a USB mouse but everything on screen freezes as well. I don't think I'm just missing the BSOD as it continues to display the same frozen image indefinitely until I manually reboot. I'll try rebuilding the clients, do I need to literally remove and reconfigure them, or just delete some of the internal folders/files (maybe the .lck folders?)
4770K @ 4.1 (Prolimatech Genesis) | EVGA GTX 970 | EVGA 1200W P2 Platinum | 256GB Samsung Pro | Sound Blaster Z | 16GB Corsair Dominator 1866 | Custom CaseLabs Mercury S5 | U2714H, Sennheiser HD 380 Pro, Das Ultimate (blank), and too many mice...
|
Re:GPUs for Afterburner
2010/02/09 18:09:35
(permalink)
warthorn
Also, having a personal problem w/ my machine. Tested CPU/RAM w/ LinX 10-pass and no problems (I've been running stock w/ mem @ manuf. specs, 1866; now RAM is underclocked to 1066) and ran Furmark to test GPU. GPU client by itself causes no problems. But if I run my 3 CPU clients (3x 2-core VMware) anywhere from 10 minutes to a few hours later my machine gives the "busy mouse" signal, then I stop being able to select anything, and finally the screen just freezes (never blacks out, no BSODs, etc). My HDD spins normally, I can still hear music if it was playing, etc... I've lost numerous WUs because of this in the last 2 days. Any advice?
Could it have something to do with power saving? Back when I ran the Win 7 rc I had a similar problem whenever I was folding and my pc tried to turn off the monitor or run a screensaver. Make sure you're not running any screensavers (even "blank") and that it's not trying to go into standby or hibernate. That's really all I can think of...
|
Re:GPUs for Afterburner
2010/02/09 19:31:51
(permalink)
Nahte27
warthorn
Also, having a personal problem w/ my machine. Tested CPU/RAM w/ LinX 10-pass and no problems (I've been running stock w/ mem @ manuf. specs, 1866; now RAM is underclocked to 1066) and ran Furmark to test GPU. GPU client by itself causes no problems. But if I run my 3 CPU clients (3x 2-core VMware) anywhere from 10 minutes to a few hours later my machine gives the "busy mouse" signal, then I stop being able to select anything, and finally the screen just freezes (never blacks out, no BSODs, etc). My HDD spins normally, I can still hear music if it was playing, etc... I've lost numerous WUs because of this in the last 2 days. Any advice?
Could it have something to do with power saving? Back when I ran the Win 7 rc I had a similar problem whenever I was folding and my pc tried to turn off the monitor or run a screensaver. Make sure you're not running any screensavers (even "blank") and that it's not trying to go into standby or hibernate.
That's really all I can think of...
+1 I have always had a problem with my system going into hibernation and then coming out again w/ W7. B4 I started folding, I disabled it and screen saver. I just physically push the off button my monitor and let the machine fold away and turn it back on when I return.
W7 64, EVGA X58 4-way SLI, I7 980x , EVGA GTX 780SC 2x, Corsair Dominator DDR3 2000 12GB, Samsung 840 Pro 256GB SSD, WD Velociraptor 1TB, HT Omega eClaro, Corsair AX1200W, Asus VG248QE-Glossy (thanks to CallsignVega @ Overclock.net) 3x Surround
|
