Sleinous

bigster

I Dont run SMP, i always used the tracker but i swiched to the V7 to get a few 8057
I followed the guide on overclockers.com step by step and i do get them just not the bonus points.

If you've never done SMP before then your passkey is probably not 'primed' yet, so keep folding those 8047 and soon you'll start getting bonus. Someone remind me how many WUs before you start getting bonus? 10 is it?

Yes it is 10 =]
 
Also note!!!! If you copied and pasted your Passkey.... Please make sure there is no extra "Blank" spaces in front of or behind that long number. This has caused us issues...

Sleinous

Darn only half my fleet are getting QRB for a total just shy of 720k

That is still awesome!
 
I picking them up slowly but need to get the rest of my stuff online this weekend. 

_Nite_

is the version 7 client required for QRB or can I just add a passkey to my v6 console clients for the GPU's?

I'm new to all this QRB stuff.

So far they are only showing up on the V7 client. I know a few people were trying with v6 and tracker and not receiving anything. When I swapped to V7 I started to get them. 

Sleinous

Afterburner

-ZS-Carpenter

Sleinous

If you haven't already - please don't forget to add Name: "next-unit-percentage" value: "100" to your v7 configuration, this will force v7 to only download a QRB when your previous unit hits 100% completion, instead of 90/95 or whatever it is by default - this will mean you wont lose a little extra QRB from a WU sitting idle for a few extra minutes!

Just wanted to verify this does work. Caught a Wu finishing up a few min ago. Next WU downloads as the last WU hit 99.99%.

Thank you Sleinous for the info on maximizing PPD. Every little bit helps when a QRB is involved.
Someone get that man a BR

Done! 

Cheers and double cheers to you two :) It does indeed, we dont want to waste precious points :D

 
Grats man, credit where credit is due

krillind8z

So far they are only showing up on the V7 client. I know a few people were trying with v6 and tracker and not receiving anything. When I swapped to V7 I started to get them. 

When I got back from Montana on the 12th, I started reading about the QRB's,  After
about an hour I started setting up my console clients (6.41) on my 3 fermi cards.  A
little while later I had them picking them up.  Have been running ever since.

_Nite_

asus939
you have to force something in console to make it work i think tex got it to work not sure

yea I'd like to know if I can force it somehow in v6 console cause I like this client, is thier a flag I can add to the client shortcut? or do I have to have adv methods enabled or what?

I already have the passkey set I'm using the same one for my SMP folding since its already primed.

I'm on 6.41 console client as well.

Nite, the flag that I had to use in the Console Client (that forced something) was only for a Kepler GPU.  If you are trying to use the Console client (use ver 6.41r2 by the way) with a Kepler, then there are (2) flags that need to be used.  Without the quotes, one flag is "-betateam" and the other flag is "-forcegpu nvidia_fermi".  You may also need to use the "-gpu x" flag where "x" is the GPU # if you are running multiple GPUs.  I will tell you that while these flags, especially the "-forcegpu nvidia_fermi" flag will allow a Kepler to Fold using the Console client, I was not successful in getting any of these 8057 beta GPU WUs.  But for that matter, neither was I successful getting any of those beta units with my Kepler running under V7 using the required "beta" flag.  Keplers require that you use either the "beta" flag in the V7 client or the "-betateam flag" with the Console client.  But I never snagged any "beta" units with either client on my Kepler GPU...always got 8018s.
 
If, on the other hand, you are Folding with a Fermi GPU, then I'd use V7 if you want to capture some of those beta 8057 WUs.  You can go after them with the Console client too (using the -betateam flag), I just see more people claiming they are getting them with V7.  That could be because more people use V7 vs the Console too.  If you go after them using the Console client with a Fermi GPU, then you don't need that other flag that has to do with "forcegpu fermi".  That flag was just to fool the Console client into Folding on a Kepler GPU. 
 
Here's a couple of nice guides to setting up V7 to specifically go after the beta GPU WU.
http://www.overclock.net/...ding-beta-project-8057
http://hardforum.com//showthread.php?t=1727789
 
Hope you go fishing for them, they are worth the effort! 
 

Go get 'em Nite!  Now I'm going to go get some sleep.  See 'yall tomorrow...ZZzzz. 

ok thanks for help Texinga :)
 
Its all setup on v6.42r2 but all my cards are stuck on 8054 at the moment, hope I get some 8057 soon.

Finally got mine running correctly, loving the PPD

hey wolf what is the ppd on a 480 i might be trading a hp touchpad for 1

I think they have the same core count, just clocked a little slower i think

asus939

hey wolf what is the ppd on a 480 i might be trading a hp touchpad for 1

8057 core 2.22
GTX480 shader clock 1500
Avg 1:59 136.5k ppd
Min 1:58 138.3k
Final credit estimate, 18526.00 points <=single WU turn in points.

asus939

the card is a zoltac 480 amp shader is factory 1512

It should do same as this one, more if you OC the shader more.
My stock shader is 1408, I don't normally OC my vcards when folding, just benching.
I just wanted to see it below 2:01 TPF for a few extra PPD.
Edit:1401 not 1408... 701/924/1401 <=stock

asus939

well then i'll just have to trade the HP touchpad  i  got real cheap     just looked and with 7 gpu's in a  small space oc 100MHz on 6  and 1 at 50MHz over highest temp is a 66

At the moment my 480's are at 64c & 66c on the other. Nice & cool running WU's.
Complete time for a 8057 is 3hrs 20min. Just started a fresh 8057. 

Beats the crap out of the 76xx WU that takes almost 6hrs to complete & a 88c temp.
I'm not frying my card for those low PPD at that stupid temp.
Can't quite understand the big difference in temps of two projects.