Re: Hadron Hydro Loop Evaporation Rate
2016/10/27 14:56:07
(permalink)
Are you using the stock tubing?
I will tell you right now that using a similar setup (but with non-stock tubing) I've been running for about that long and I'm nowhere near that level of drainage. Make sure your fill port is sealed tightly as it could be seeping air out that normally would condense. If it persists go to Home Depot and pick up some 3/8 x 1/2 tubing. It can't hurt, and it's like $5 for 10 feet.
Either way, refill as necessary. A complete drain, probably along the order of six months is about what I would expect with treated coolant. If you're running plain old distilled water with some antimicrobial, a bit more common couldn't hurt.
I rebuild very frequently but that has more to do with the upgrade itch than anything. If your loop's assembled right, you shouldn't have to rebuild it unless totally necessary.
Yet Another Hadron Air BuildAsus Z97i Plus
EVGA Hadron Air
Intel i5 4670k
EVGA Geforce GTX 960 SSC
8GB EVGA Superclock DDR3-2400 RAM
Samsung 850 M.2 SSD 240GB