V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Just bought my First X99 Micro mb and wanted to do something special for this Little Board-----------------------------------------------For this Build i will be using:EVGA x99 Micro 2 mbSamsung 950 PRO m.2 512 ghz EVGA NEX1500 Power SupplyEVGA 980ti Classy W 780 ti HYDRO copperGSkil Trydent "Z" 32GB 3200 DDR4 @ 3200 1.35VIntel 5820K @ 3.8 1.175V2 Black Ice Nemesis 280GTX® Dual-Core Radiator - Black CarbonBitspower CPU waterblock and RES Bitpower Misc. FittingsSwiftech DDC pump 35XSilverstone Micro atx aluminum Case for partsNZXT Manta Mini itx caseCorsair PMW Red Led 140mm fans, Red led's throughout----------------------------------------------- I'm calling this Build the "Manta "X" The NZXT "Manta" is a Mini itx Case That I fell in love with When I saw it in person at A Microcenter near me................... The structure of the case is of normal aluminum framing But the All Plastic sides, Front, Top and feet are made of a Super thick Plastic Almost feels like it's made of Delrin or "ABS" (Very heavy) So here we go !!!!!!! I have an old "Silverstone" Micro ATX SG01 Evolution SFF Case laying around That i'll strip for some spare parts for this build .............................. Time to strip the NZXT Manta CaseI drilled out all the rivets that hold the mother Board and Hard Drive brackets
post edited by V84x4 - 2016/11/05 01:10:51
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/17 18:54:50
(permalink)
Dremel Time............. Chopping up the Silverstone Aluminum Case is the next part The Mother Board Bracket of the SilverStone aluminum case is about an 1/8" short so some custom bending will be involved in the fitment............. I also need to cut shorter the silverstone chassis Cutting the PCI card brackets so that there's only 2 for the EVGA Classy 980ti Card and utilizing as much of the stock case that I can for a Stealthy look Im going to be using the Original Hard Drive Brackets to keep this build looking as stock as possible!!!!!
post edited by V84x4 - 2016/04/17 19:07:24
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/17 18:58:33
(permalink)
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/17 19:18:16
(permalink)
Paint Time !!!! Well everything fits nicely and I have everything bolted down in place so now it's time to take all of my lovely EVGA parts out and give her a coat of paint !!!! I found a real close match to the same finish of the original case paint the fine texture hides any mismatch
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/17 19:25:41
(permalink)
Results !!!!!! Im still waiting on the G Skill "Trident Z" 32gb DDR4 ram and the "Corsair H100i" water cooler but as you can see it's coming along Nicely............... Fitment is better than I expected and I will challenge you to look closely to see that this case wasn't made for a "MICRO" mother Board ;-)
post edited by V84x4 - 2016/04/18 17:39:43
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
sinned.
EGC Admin
- Total Posts : 1337
- Reward points : 0
- Joined: 2010/05/11 11:44:59
- Location: Tulsa, OK
- Status: offline
- Ribbons : 5
Re: MANTA "X"
2016/04/17 19:41:49
(permalink)
Origin: EGCsinned Steam: sinned1971 uPlay: EGCsinned Battlenet: EGCsinned#1652 My Affiliate Code: TL7WS6008R
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/18 20:52:01
(permalink)
sinned. Impressive
Thank you !!! Coming form you that means a lot !!!! --------------------------------------------------------------------------------------------------------------------- OK so I have it all built Two, Intel 240gb in Raid stripe 0 I am over clocking the 5820K at 4.0 Ghz and the ram is clock at 3200mhz As I suspected, with this Mini itx case all closed up and the h100i at the top, I am getting temps of 62C degrees in game and idle temps of 52C degrees When I remove the lid of the case, my temps drop by 10C degrees I need to add a 140mm rear fan.................... and since this mod pushed the motheboard back 3/4 of an inch, the case will now except a 140mm rear fan Also I'm going to swap out the H100i for a H115i ThenI will cut the top of the lid and insert a custom grill to allow for more air flow from the top These three things should bring my temps down to around 45C Degrees In Game
post edited by V84x4 - 2016/04/18 21:08:25
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/22 15:32:50
(permalink)
Let the Heat out !!!!! Today I cut the top out and to my suprise the Lid is made of 2 seperate pieces (Aluminum and Plastic) I am in the process of finding some matching Honeycomb Mesh metal screen to mold into the new air vent After cutting the lid I have dropped my CPU temp by 10C degrees and am now idling at 42C (OC at 4.0ghz)
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: MANTA "X"
2016/04/22 23:05:40
(permalink)
Can't be bad with an "X" in it. LOL. Nice job.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/24 15:46:03
(permalink)
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/04/30 13:14:02
(permalink)
MOD MAIL TODAY!!!!! I ordered some mesh screen for my Lid Mod from Frozen PC and it came in the mail today As previously stated above: I had to cut a hole out of the NZXT Manta case lid because I mounted the radiator up top and the Lid side vents weren't enough to vent the radiator (was running hot) by doing this I dropped 7 degrees in temp I looked everywhere for a matching Honeycomb Mesh butcouldn't find any so I went with Circle Mesh (Looks OK I guess) This picture make my Lid cut look crooked but it's really not (Optical Illusion) Full Water cooling coming soonRegards rick
post edited by V84x4 - 2016/04/30 13:19:22
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102260
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: MANTA "X"
2016/05/01 03:21:06
(permalink)
I like the method in which you saw the heat go down without the top cover and modded the top cover to allow better heat dissipation. Just brilliant.
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/05/01 06:35:46
(permalink)
rjohnson11 I like the method in which you saw the heat go down without the top cover and modded the top cover to allow better heat dissipation. Just brilliant.
Thank you.......... I wish I could find the exact "Honeycomb" mesh As you can see from the pics, this new mesh is more restrictive and doesn't do a good enough job of letting the heat out I will continue my search and also contact NZXT to make them aware of this issue with this awesome MANTA case Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/05/07 18:37:46
(permalink)
A Step in the COOL Direction I saw a post in the 980 Board about someone selling this Hydro Coper 780 TI GPU block and knew it would be a perfect addition to my build so I bought it Stay tuned Regards Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: MANTA "X"
2016/07/30 21:40:30
(permalink)
Great mod! I like how you made something you like your own. Pretty cool. Have you taken the custom loop plunge yet?
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: MANTA "X"
2016/07/31 05:52:25
(permalink)
This is cool, case look as Mini ITX on first look, but inside is mATX board with better options as Quad Channel and more PCI-E slots for PCI-E SSD or M.2 and Sound Card. Now you will install 780Ti Classy Hydro Copper Water Block on EVGA GTX980Ti Classified? Smart, smart. If that mean something to you... you even could replace label with different, you can design new with similar fonts or same and replace.
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/07/31 15:42:46
(permalink)
☼ Best Answerby EVGATech_ParkerM 2016/10/21 09:11:20
notfordman Great mod! I like how you made something you like your own. Pretty cool. Have you taken the custom loop plunge yet?
Gathering all the parts as we speak Im new a custom loop so will take my time but I have a visual of the loop itself and if all goes well it should come out sweet Stand By ;-) Thanks for looking and coments Vlada011 This is cool, case look as Mini ITX on first look, but inside is mATX board with better options as Quad Channel and more PCI-E slots for PCI-E SSD or M.2 and Sound Card. Now you will install 780Ti Classy Hydro Copper Water Block on EVGA GTX980Ti Classified? Smart, smart. If that mean something to you... you even could replace label with different, you can design new with similar fonts or same and replace.
Ye Im slowly gathering all my parts and thoughts I am very happy with the build itself but need to maintain cooling in such a small case Stand by for more to come Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/08/01 16:33:59
(permalink)
MOD MAIL TODAY Another piece to the puzzle receive 1 of 2 Black Ice Nemesis 280GTX® Dual-Core Xtreme Profile Radiator - Black Carbon Man this thing is a beast it's twice as thick as my corsair h115i with twice the capacity Now im waiting on a MONSOON reservoir and D5 pump More to come Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/19 10:26:05
(permalink)
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: MANTA "X"
2016/10/19 10:50:02
(permalink)
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/20 07:34:33
(permalink)
Super Tight Fit !!! I'm a BIG Guy and have BIG Hands With this Tinny case I probably should have gone with a thinner RAD Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/20 07:39:42
(permalink)
FIRST FILL ......... IT LEAKED !!!!! https://youtu.be/41AxyU5_2H0The Radiator is soooo thick (50mm) That the "Down" tube on the reservoir pushes slightly against the video card creating tension on the lower Res Cap................(Where it leaked) So, I need another Bitspower Triple Rotary to get around the Video Card Stand by...... regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102260
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: MANTA "X"
2016/10/20 22:31:53
(permalink)
V84x4 FIRST FILL ......... IT LEAKED !!!!! https://youtu.be/41AxyU5_2H0 The Radiator is soooo thick (50mm) That the "Down" tube on the reservoir pushes slightly against the video card creating tension on the lower Res Cap................(Where it leaked)
So, I need another Bitspower Triple Rotary to get around the Video Card Stand by...... regards, Rick
I'm interested on seeing the picture of how you resolved that issue.
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/21 09:01:42
(permalink)
FIXEDSo I just added some 90 degree fittings to get around the 980 TI classy Also got a nw Bitspower Acrylic DDC Pump top and flow meater So lets try this again !!!! Stay tuned Regards, Rick
post edited by V84x4 - 2016/10/21 10:23:40
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/21 10:25:49
(permalink)
SO FAR, SO GOOD !!!! Now to let the water loop "Leak Test" for a while Thanks for looking Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/21 19:43:33
(permalink)
Working Fine....... So I have it all together Everything seams to be working fine Temps have dropped by at least 8 degrees........... gonna start over clocking and see where I land Feature plans for some more LED's and I want to show off the NEX1500 by cutting a window using acrylic and led's Thanks for taking this trip with me I feel much more confident now that I have done my first liquid cooled loop If you like my Build............please +1 me on "MODS RIGS" using the link under my avatar Best Regards, Rick
post edited by V84x4 - 2016/11/03 23:23:18
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102260
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: MANTA "X"
2016/10/22 00:44:53
(permalink)
Love the continuous work on this mod and the additions that continue to keep this mod looking great.
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/10/22 08:42:44
(permalink)
rjohnson11 Love the continuous work on this mod and the additions that continue to keep this mod looking great.
Why Thank you sir !!!!!! Yeah it is ever evolving as I love to tinker and learn 2 Radiators ?????The original plan was to run 2 RAD's on this build, so I need to keep going ;-) It looks as if I will have to order a 80mm or even a 50mm reservoir instead of the 100mm i'm running now so I can get two more 140mm fans inside the top of the case and the 280GTS black ice RAD will sit on top (Under the lid) Stay Tuned best regards, Rick
post edited by V84x4 - 2016/11/03 17:52:28
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
CptSpig
SSC Member
- Total Posts : 736
- Reward points : 0
- Joined: 2011/11/21 11:12:11
- Location: Sunny California
- Status: offline
- Ribbons : 1
Re: MANTA "X"
2016/10/24 15:22:45
(permalink)
Very Nice
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: MANTA "X"
2016/11/10 08:46:07
(permalink)
CptSpig Very Nice
thank you sir !!! -------------------------------------------------------------------------------------- Apart again !!!Second 280 Radiator Install....... So i received the rest of my parts today (bitspower 50mm Res, Misc fittings and more tube) I have to strip almost everything back out of the case to install the Second radiator and fans Super tight fitThe upper RAD 140mm fans barely clear the other RAD and fittings...... Almost done with this build Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|