Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Hello again every one! I'm back again with a new build :D I think the title pretty much says it all. I had planed something else for the this next build but things changed in the build plan, so the build has changed a bit to suit. I had planed a build with lots of RGB lighting but that build will come later. But for now Gears of War is in the works, Hope you all enjoy the ride. :) anyway I will get straight into it with some build photos as I know that's what you are all here to see :P sexy pic's and mooding. To start of I will be using a new Cooler Master, Master Case Maker 5. The Case comes with a tin box with all the screws and other bits and two other parts that I will need to look into. The box also has soft rubber back on it that is also magnetic. witch I think is a nice touch. The case also comes with a Red led magnetic strip. That archers to the ran controller that's fitted to the back of the Mo-Bo tray. Now for some hardware info: Mobo: R.........................? No I don't think I'm going to say just yet. Still so much more to show. :P The build will have 2 of the Masteraccessory Tempered glass sided panels More again, Tomorrow with many many more photos and more info on the build. Thanks again for stopping by. :)
post edited by Zenator - 2017/01/08 01:47:30
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: GOW - ZenModz
2016/10/01 12:53:31
(permalink)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/01 20:23:21
(permalink)
Cheers XrayMan :) Here are some more progress photos :) For the PSU for this build will be the CM MasterWatt Maker 1200 Not sure if this will have the power needed for the build ? Yer right lol :P I'm sure this beast would power every PC in my house. This monster also comes with plenty of cables and a here is a small video about it. Very cool. https://www.youtube.com/watch?v=s-GOKSdU8wI OK time to start turning this case into many parts. Front sound block out cover looks good and it works real well to stop most of the fan noise you get from the front of the case. on the inside it has sound dampening foam. Fan and LED controller is mounted to the back of the motherboard tray. now time to start removing more. This part takes a bit of effort to take of but pulling it out towards your self it should come off. it clips in at 4 points. now you can take a screw driver and remove the top bracket. top cover that also comes with a magnetic cover if you don't any top fans. Front grill dust cover.
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/01 20:55:55
(permalink)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/01 21:17:53
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/10/02 02:47:12
(permalink)
This is looking fantastic so far.
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/02 22:29:06
(permalink)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/05 03:50:49
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/10/05 06:07:24
(permalink)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/12 00:34:15
(permalink)
Cheers, rjohson11. :) The water cooling parts have arrived :) All the white will be painted micro silver. Everything else will be Red, Silver, and Black. As well as some other small color shade changers and matting clear. More again soon. Thanks again for stopping by.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: GOW - ZenModz
2016/10/12 02:06:17
(permalink)
Nice, Cooler Master PSU have great case and I like because they offer Tempered Glass Panel. LED is also cool I didn't saw them before, how much they cost? CM improve a lot their stuff last 2 years.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/10/12 02:15:52
(permalink)
Looking awesome! If I ever win the lottery maybe I'll ask you to make me a build. LOL!
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/12 02:48:50
(permalink)
Vlada011 Nice, Cooler Master PSU have great case and I like because they offer Tempered Glass Panel. LED is also cool I didn't saw them before, how much they cost? CM improve a lot their stuff last 2 years.
Hi Vlada011 cheers, CM gear is very cool :) The LED come with the Mastercase Maker 5. I'm not sure if you can buy them on there own.
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/12 02:53:48
(permalink)
rjohnson11 Looking awesome! If I ever win the lottery maybe I'll ask you to make me a build. LOL!
Hi Im sure if you won the lottery you would build it your self, After all you would have all the time you need then :P But I would still be happy to build one for you. :)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/15 21:16:30
(permalink)
Hardware test fitting. Starting to flesh out the cooling, and getting all the hard lines set, As well as any mods that I need to do to the case before removing it all again to get ready to start painting the case. More again soon. Thanks again for stopping by.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/10/16 01:42:09
(permalink)
Brilliant, just brilliant.
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/17 00:49:21
(permalink)
Cheers, but I'm only putting it together. All the credit go's to the designs. :)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/10/18 04:01:45
(permalink)
Zenator Cheers, but I'm only putting it together. All the credit go's to the designs. :)
Perhaps, but it takes a great modder to bring it all together
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/18 13:00:32
(permalink)
|
AzN-SoLjA
CLASSIFIED ULTRA Member
- Total Posts : 7982
- Reward points : 0
- Joined: 2011/06/18 11:45:02
- Location: Kent, WA - Use My Affiliate Code: 3MHCIBME48
- Status: offline
- Ribbons : 14
Re: GOW - ZenModz
2016/10/18 14:23:56
(permalink)
Just stumbled onto this, fantastic work so far! Can't wait to see what's next
| EVGA Z68 FTW | EVGA GTX 780 Ti SC 3GB | EVGA GTX 1080 Ti FTW3 | Custom EK Water Loop | Red Harbinger Cross Desk | i7 2600K @ 4.5GHz @ 1.24v | Corsair 16GB Vengeance | Corsair Neutron 256GB SSD | Corsair AX850 | Lamptron FC5V3 | ASUS VE278 27" | | Creative Inspire T6160 5.1 & X-Fi Fatal1ty 7.1 Champ | Razer Marauder & Spectre & Tiamat 7.1 | Affiliate Code: 3MHCIBME48 | Associate Code: 08HWLPJXE0O5MPM
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/10/21 14:33:10
(permalink)
AzN-SoLjA Just stumbled onto this, fantastic work so far! Can't wait to see what's next
Hi AzN-SoLjA thanks :)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/11 01:41:53
(permalink)
Sorry for the very late post it has been a somewhat hectic couple of weeks. But back on track. Here are some more updates on the progress, And still lots to come. Thanks again for stopping by. More soon.
|
rsabatino
FTW Member
- Total Posts : 1169
- Reward points : 0
- Joined: 2010/02/04 14:00:46
- Location: new jersey usa
- Status: offline
- Ribbons : 6
Re: GOW - ZenModz
2016/11/11 07:41:51
(permalink)
Operation System Microsoft Windows 11 Pro Processor AMD Ryzen 9 5950X 16-Core Processor Memory 24.2 GB Free (31.9 GB Total) Graphics Card NVIDIA GeForce RTX 3070 Ti (8.0 GB) Monitor HP 32 Display (1920 x 1080 @ 60 Hz) Disk Storage 5240.5 GB Free of 6542.2 GB Audio NVIDIA High Definition Audio Motherboard ASUSTeK COMPUTER INC. (ROG CROSSHAIR VIII HERO (WI-FI)) Mouse Razer BlackWidow V3 Tenkeyless Keyboard Razer Viper
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/12 00:34:43
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GOW - ZenModz
2016/11/12 00:38:36
(permalink)
Brilliant, how much is left to do on that mod?
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/12 01:05:39
(permalink)
rjohnson11 Brilliant, how much is left to do on that mod?
Thanks :) Still heaps to go on this one. More mods still to come, then pull it all down again to get the painting done. :)
|
V84x4
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2015/10/04 05:15:38
- Location: Michigan USA
- Status: offline
- Ribbons : 7
Re: GOW - ZenModz
2016/11/12 06:18:11
(permalink)
I love your color choices They blend well together Subscribed
Regards, Rick
Computer Specs:Lilan Li 011D Bitspower DISTRO, MSI 570 Carbon Pro MB, AMD 3900X @ 3.8ghz, Bitspower Water Loop, TRIDENT Z 64GB (4x16GB) DDR4 3200, evga 2080 Super, EK waterblock 980 PRO M.2 1TB ,evga 1000w G3 psu, LG GSYNC 4KK Curved 32 inch, Windows 10 64bit
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/15 00:26:52
(permalink)
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/20 03:08:46
(permalink)
Hi everyone, Quick update of the build. The White you see will soon be paint red. Thanks again for stopping by.
|
Zenator
Superclocked Member
- Total Posts : 219
- Reward points : 0
- Joined: 2015/06/21 01:52:17
- Location: Canberra AUS
- Status: offline
- Ribbons : 8
Re: GOW - ZenModz
2016/11/25 14:46:26
(permalink)
Laser cutting and dremel work to add texture before painting starts. The logo is only 80mm high so a lot of the fine detals like the lines in the teeth where lost so I had to add them back. and I had to make a " F " for the " OF " with the dremel as it got stuffed up in the vectors some how. I have also linished to text to add texture to it once painted. Teeth lines added back Thanks again for stoping by.
|