I was using the old Precision for years with my old-school Logitech G15 LCD screen for years, and only "upgraded" after buying the GTX 1070 FTW.
 
The LCD display worked, right up until I started the program with Windows 7.  Now E-LEET still works just fine, but nothing I do seems to get my G15 screen selector to recognize Precision now.
 
Just updated to X 6.06 and it's telling me to restart, again.  Still no LCD display.  :(
 
 

I just upgraded to XOC, but lost all my previous Profiles, which took hours of overclocking and benchmarking to optimize. Is there any way to resurrect my Profiles in the new software through restoring from a prior backup? Please advise. Thanks.

I am still having problems with K boost. Sometimes it works, other times it freezes. I am using an evga gtx950 ftw.

artaxs
I was using the old Precision for years with my old-school Logitech G15 LCD screen for years, and only "upgraded" after buying the GTX 1070 FTW.
 
The LCD display worked, right up until I started the program with Windows 7.  Now E-LEET still works just fine, but nothing I do seems to get my G15 screen selector to recognize Precision now.
 
Just updated to X 6.06 and it's telling me to restart, again.  Still no LCD display.  :(

It works with the G510s, but setting the font size makes no change. Are you using the most recent Logitech Gaming software?
 
And the FPS counter is broken. I have the FPS counter on-screen in WoW, it shows 120+FPS, the counter in the LCD readout shows 14.

Power % in the OSD seems to be stuck at 11%.

Came from Prexision X16 v5.3.11 and got an ASUS 1060 Strix and installed Precision X OC v6.0.5 and it was wonky even with a "scrubbing" of all traces in the registry, so i went back to X16, then saw OC v6.0.6 and installed that and it works fine IMO, no issues so far, no crashes nothing. Why did it ask for the information before launch, the name, GPU(make and model) etc.?
 

 
Thanks for the software EVGA.
 

Is the temperature hysteresis setting working for anyone else? It does absolutely nothing for me, and some quick googling shows some other people have had this problem for awhile now with PrecisionX.

All very nice, Having just gotten a GTX 980 Ti FTW, how do you save your profiles? Every time I restart my rig, I have to reset my profile setting manually. I've heard this is some buggy software, but damn people.

Yeah Im gonna wait for the next version before I even try again, heck ive waited 2 years for EVGA to release a keyboard with EVbot. Why not

A simple question about XOC 6.0.6. Probably not a simple answer possible?
------------------------------------------------------------------------------------------
 
1. My system basics (Pertaining to XOC only). EVGA GTX 1080 FTU. Single GPU Pcie 3 setup. (works well @ default) -- Acer XB270HU 27" monitor with 144Hz, IPS G-Sync capable. May help detail----- i5 3560k @ 4.8GHz.-- 16GB DDR3 1868MHz.
2. I want to use this Software for a simple medium GPU OC that's stable. Fan control. (Curve profile preferred). Over vol. probably I don't need it?
3. Should I use this software for the above? If so, is it reasonably intuitive?    (Note: I used earlier 6.0.4 last time version and couldn't fully achieve what I wanted. Some basic stuff worked.)
 
So can anyone who knows about this answer number 3? Or give a partial answer even? Thanks!! 

Brimy

Gawg36
A simple question about XOC 6.0.6. Probably not a simple answer possible?
------------------------------------------------------------------------------------------
 
1. My system basics (Pertaining to XOC only). EVGA GTX 1080 FTU. Single GPU Pcie 3 setup. (works well @ default) -- Acer XB270HU 27" monitor with 144Hz, IPS G-Sync capable. May help detail----- i5 3560k @ 4.8GHz.-- 16GB DDR3 1868MHz.
2. I want to use this Software for a simple medium GPU OC that's stable. Fan control. (Curve profile preferred). Over vol. probably I don't need it?
3. Should I use this software for the above? If so, is it reasonably intuitive?    (Note: I used earlier 6.0.4 last time version and couldn't fully achieve what I wanted. Some basic stuff worked.)
 
So can anyone who knows about this answer number 3? Or give a partial answer even? Thanks!! 

I feel you meant a 3570K and not a 3560k
 
 
At the moment, for me at least, i achieved all of your requirements with 6.0.0 but my issue was in shutting down i got a error message and then on system reboot all settings were rest to default and i couldn't work a fix so i am waiting on 6.0.7 to see if that is worked out.
 

Thanks Brimy. My bad. "i5 3560k"  i5 3570k Of course you are right.

This EVGA Precision has much bug, developers do not see it, here the target frame does not work correctly, you score 120 it shows on the screen 113, as can many bug and nobody does anything? Each version out the same problems remain, EVGA company is almost perfect, the software is crap.

Newms118
However, when Windows 10 loads up, itll start precision X but will not load the profile.  I have to go to the program and click the number for it to start the profile.  Is there a way for it to just load the profile without me having to click on the number?

As for me, program itself doesn't even start with the system. Every restart "Start with OS" is unmarked again.

vitorepr
I don't know if this issue happening only with me, but the framerate counter isn't exactly correct... there are many fps drops but it is not true. When i'm playing BF4, the EVGA Precision XOC 6.0.6 framerate flutuates between 120 and 2 FPS many times but the game keeps running nice.

Same here, we all see the problems, but developers do not test the programs before releasing.

EVGA Precision XOC 6.0.7 Released  is now out