bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/29 15:37:03
(permalink)
Brimy
bcavnaugh
Brimy
bcavnaugh
Brimy
Did everyone else get this on first boot of the Precision x OC?
or
http://s537.photobucket.com/user/feteking/media/PrecisionXOC_zpsc1lfwffc.png.html
Just complete and post if it asks you over and over.
I fixed it already and i completed it to, was just wondering.
Mostly Users with Non EVGA Cards saw this.
I only have my 760ftw in my system.
EDIT: doesn't Precision support other GPUs too?
On GPUs from NVIDIA NOT AMD
|
xxxslimshady
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2012/03/22 12:40:46
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 15:42:55
(permalink)
this is what I am talking about its cranked all the way up 1.2v kingpin hits 1.3v with old PSX16 
|
xxxslimshady
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2012/03/22 12:40:46
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 15:44:45
(permalink)
lmao and I just noticed that its not going to 171% lmao
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision XOC 6.0.5
2016/08/29 15:45:59
(permalink)
Hmm haven't used the newer Precision since back in the legacy days, this appears to be looking pretty good may have to give it a try again...
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
LANCE55433
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2016/06/18 08:32:59
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 15:56:26
(permalink)
xxxslimshady
this is what I am talking about its cranked all the way up 1.2v kingpin hits 1.3v with old PSX16
i am running sli and i clicked on the chain link but the setting only go to 1 card not both is this a bug?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/29 16:02:51
(permalink)
Brimy
Did everyone else get this on first boot of the Precision x OC?
I do have say this really suck to have to complete when we even have EVGA Cards.
|
Wiser87
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2012/03/01 22:42:46
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 16:07:34
(permalink)
bcavnaugh
FattysGoneWild
I sent a PM a few days ago about this here. Why is EVGA refusing to fix and acknowledge this issue?
Are you sure it is not HWiNFO64's causing your issue?
Have you tested this on another computer?
Could your WMI be corrupted, if so have you tried to repair it, have you ran sfc /scannow to see if you have or need some fixing.
Not seeing this myself but see a little when I start HWiNFO64
I only mentioned HWiNFO64 in that thread to show that other hardware monitoring programs don't have the same issue. Either EVGA is doing something odd with how they monitor hardware, or it's caused by the features for controlling hardware voltage/clocks/fans/etc. I've tried uninstalling Avast and closing background programs, but the issue only happens when PrecisionX (and PrecisionX OC) is running. I just tested with 6.0.5 and confirmed that the problem still happens. I ran Sysinternals'/Microsoft's Process Monitor utility as administrator, confirmed that WmiPrvSE.exe (WMI Host Provider) was not in use, started PrecisionX OC, confirmed that the issue started only after it was running, exited PrecisionX OC, and confirmed that the issue stopped once PrecisionX's processes were no longer running. There have been a couple times where I would close PrecisionX, but PXSW10_x64.exe would still be running in the background and would cause the WMI issue to continue happening. It's important to make sure there are no PrecisionX processes running when checking on WmiPrvSE.exe's usage for comparison. ASUS' AI Suite 3 (not really a great program, but it works) also does hardware monitoring and control and is able to do so without causing the WMI Provider Host to constantly access tzres.dll and tzres.dll.mui.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/29 16:13:46
(permalink)
Sorry EVGA but after running this software one time on my GTX 980 Hybrids when I set my PC set to 124% it restarts my PC. Other issues not being able to save profile setting, while one an SLI setup I can save one card settings but not the other, when I select the other card after saving the profile the setting reset back to 0 on the other card. BSOD Code 117 Going back to EVGA Precision X 16 5.3.11 Added: Back EVGA Precision X 16 5.3.11 now with all my Profiles re-setup and running with no issues. Profiles are set in so starting with 1440 1450 1460 1470 1480 1490 and 1501 and last one for Default Settings with Fans set to 70%
post edited by bcavnaugh - 2016/08/30 09:49:21
|
Brimy
Superclocked Member
- Total Posts : 250
- Reward points : 0
- Joined: 2013/02/21 07:58:57
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.0.5
2016/08/29 17:43:43
(permalink)
I installed 6.0.5 and did a reboot of my PC and then launched razer cortex and steam and ran COD MW2, MW3, Ghosts and BO3 (this is what i play) and razer cortex keeps freezing then crashes after about 3-5 minutes of game play. Going back to X16 and i hope this doesn't cause any issues with it. Will try other updates as i see them posted.
P630 | P8Z77-V PRO | i5 3570k@4.7Ghz | ASUS STRIX-GTX1060-6G-GAMING | CM Extreme Power Plus - 600W | 1x250GB 850EVO & 2x Seagate Barracuda 1 TB HDD | Patriot Viper 3 Series DDR3 16GB 2200MHz | XSPC Rs360 Kit | CM Storm QuickFire TK | Corsair M90 | Acer GN246HL | Canon PIXMA MG5320 | Windows 7 Ultimate 64bit
|
c4s2k3
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2013/10/13 10:28:42
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:01:35
(permalink)
I'm stuck at the "EVGA Card Detected" screen asking for a serial number. I want to use on my new Titan XP and my 2nd GPU (which I kept in for Blender rendering) is an EVGA 780 ti. Do I seriously have to pull the card to get a serial number the software should be able to see on its own? I tried getting off the hardware info in windows but XOC won't accept it as decimal or hex. Besides, if the software is smart enough to figure out I have an EVGA card in the system, shouldn't that be enough?
post edited by Scarlet-Tech - 2016/08/29 18:53:22
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:11:47
(permalink)
Welcome to the Forum c4s2k3 c4s2k3
I'm stuck at the "EVGA Card Detected" screen asking for a serial number. I want to use on my new Titan XP and my 2nd GPU (which I kept in for Blender rendering) is an EVGA 780 ti. Do I seriously have to pull the card to get a serial number the software should be able to see on its own? I tried getting off the hardware info in windows but XOC won't accept it as decimal or hex. Besides, if the software is smart enough to figure out I have an EVGA card in the system, shouldn't that be enough?
You only need to complete this screen one time and then it will not ask you again.
post edited by Scarlet-Tech - 2016/08/29 18:51:47
|
c4s2k3
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2013/10/13 10:28:42
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:28:39
(permalink)
bcavnaugh
Welcome to the Forum
c4s2k3
I'm stuck at the "EVGA Card Detected" screen asking for a serial number. I want to use on my new Titan XP and my 2nd GPU (which I kept in for Blender rendering) is an EVGA 780 ti. Do I seriously have to pull the card to get a serial number the software should be able to see on its own? I tried getting off the hardware info in windows but XOC won't accept it as decimal or hex. Besides, if the software is smart enough to figure out I have an EVGA card in the system, shouldn't that be enough?
You only need to complete this screen one time and then it will not ask you again.
Yeah, I kinda figured that much but really, I have to take my computer apart just to get a serial number even though the software already knows I have a 2-3 year old EVGA card in there?
post edited by Scarlet-Tech - 2016/08/29 18:51:24
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:33:05
(permalink)
c4s2k3
bcavnaugh
Welcome to the Forum
c4s2k3
I'm stuck at the "EVGA Card Detected" screen asking for a serial number. I want to use on my new Titan XP and my 2nd GPU (which I kept in for Blender rendering) is an EVGA 780 ti. Do I seriously have to pull the card to get a serial number the software should be able to see on its own? I tried getting off the hardware info in windows but XOC won't accept it as decimal or hex. Besides, if the software is smart enough to figure out I have an EVGA card in the system, shouldn't that be enough?
You only need to complete this screen one time and then it will not ask you again.
Yeah, I kinda figured that much but really, I have to take my computer apart just to get a serial number even though the software already knows I have a 2-3 year old EVGA card in there?
You only need to look at your My Products web page to get your serial number. That is if you Completed Product Registration for your card. Also masking bad words are not allowed here on the Forum.
post edited by Scarlet-Tech - 2016/08/29 18:52:19
|
BossJ
Superclocked Member
- Total Posts : 112
- Reward points : 0
- Joined: 2007/02/21 19:43:27
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:35:25
(permalink)
So I have the original Titan Xs and they are not "Evga" but they have a custom EVGA bios on them. Can't get past the login screen now, because I don't have a 'legit' serial? Thought this was only for Pascal models... So I guess I'm SOL - MSI Afterburner here I come?
BossJ Water - Cooled System i7-5930k (OC 4.5GHz) Noctua NH-U12S CPU Cooler - Silverstone FM121-B EVGA SuperNOVA 1300 G2 (1300W) ASUS Rampage v EXTREME G.Skill Ripjaws 4 Series 32GB DDR4 3200 OC Nvidia Titan X (OC 1550Mhz) Nvidia Titan X (OC 1550Mhz) Samsung 850 SSD - 500GB x3 OCZ Vertex 3 Windows 10
|
c4s2k3
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2013/10/13 10:28:42
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 18:45:05
(permalink)
bcavnaugh
c4s2k3
bcavnaugh
Welcome to the Forum
c4s2k3
I'm stuck at the "EVGA Card Detected" screen asking for a serial number. I want to use on my new Titan XP and my 2nd GPU (which I kept in for Blender rendering) is an EVGA 780 ti. Do I seriously have to pull the card to get a serial number the software should be able to see on its own? I tried getting off the hardware info in windows but XOC won't accept it as decimal or hex. Besides, if the software is smart enough to figure out I have an EVGA card in the system, shouldn't that be enough?
You only need to complete this screen one time and then it will not ask you again.
Yeah, I kinda figured that much but really, I have to take my computer apart just to get a serial number even though the software already knows I have a 2-3 year old EVGA card in there?
You only need to look at your web page to get your serial number.
That is if you Completed for your card.
Also masking bad words are not allowed here on the Forum.
Thanks for the info.
post edited by Scarlet-Tech - 2016/08/29 18:52:49
|
FattysGoneWild
CLASSIFIED Member
- Total Posts : 2660
- Reward points : 0
- Joined: 2011/04/24 18:45:43
- Location: KFC
- Status: offline
- Ribbons : 3
Re: EVGA Precision XOC 6.0.5
2016/08/29 20:54:54
(permalink)
Wiser87
bcavnaugh
FattysGoneWild
I sent a PM a few days ago about this here. Why is EVGA refusing to fix and acknowledge this issue?
Are you sure it is not HWiNFO64's causing your issue?
Have you tested this on another computer?
Could your WMI be corrupted, if so have you tried to repair it, have you ran sfc /scannow to see if you have or need some fixing.
Not seeing this myself but see a little when I start HWiNFO64
I only mentioned HWiNFO64 in that thread to show that other hardware monitoring programs don't have the same issue. Either EVGA is doing something odd with how they monitor hardware, or it's caused by the features for controlling hardware voltage/clocks/fans/etc. I've tried uninstalling Avast and closing background programs, but the issue only happens when PrecisionX (and PrecisionX OC) is running.
I just tested with 6.0.5 and confirmed that the problem still happens. I ran Sysinternals'/Microsoft's Process Monitor utility as administrator, confirmed that WmiPrvSE.exe (WMI Host Provider) was not in use, started PrecisionX OC, confirmed that the issue started only after it was running, exited PrecisionX OC, and confirmed that the issue stopped once PrecisionX's processes were no longer running.
There have been a couple times where I would close PrecisionX, but PXSW10_x64.exe would still be running in the background and would cause the WMI issue to continue happening. It's important to make sure there are no PrecisionX processes running when checking on WmiPrvSE.exe's usage for comparison.
ASUS' AI Suite 3 (not really a great program, but it works) also does hardware monitoring and control and is able to do so without causing the WMI Provider Host to constantly access tzres.dll and tzres.dll.mui.
Its fallen on deaf ears. They just continue to ignore it and not acknowledge the problem. I don't know what their get up is or problem over there.
HP Omen 880-160se custom ordered OS: Windows 10 64 bit MOBO: HP Tampa2 CPU: Intel i7 8700k @4.8GHz RAM: 32GB DDR4 2400 GPU: PNY XLR8 RTX 3080 PSU: Delta 750w 80 Plus Platinum NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP SSD: 250GB Samsung 860 EVO HDD: 2TB Seagate Barracuda ST2000DM001 Sound: Logitech Z623 THX 2.1 Speakers Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display Keyboard: HP Omen 1100 Mouse: HP Omen 600
|
alan242
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2010/07/19 14:20:15
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/29 23:49:39
(permalink)
bcavnaugh
Brimy
bcavnaugh
Brimy
Did everyone else get this on first boot of the Precision x OC?
or
Just complete and post if it asks you over and over.
I fixed it already and i completed it to, was just wondering.
Mostly Users with Non EVGA Cards saw this.
With the beta BIOS installed, I saw that dialog when I installed 6.0.4. EVGA users with a AMD motherboard and stock BIOS (which I had before) or Non-EVGA users see this dialog that is very similar but slightly different forums.evga.com/FindPost/2516625 (sorry can't put http:// in front of it for some reason)
Graphics Card: EVGA GTX1080 FTW Monitors: Acer XB270HU, Dell WFP2407 Motherboard:GA-Z170X-UD3 Ultra CPU: i5-6600K @4.5Ghz RAM: 16GB Viper Elite 3200 @3733 Case: Silverstone Fortress FT02 Power Supply: Corsair RM850i OS: Linux, Win7 & 10 x64
|
sethleigh
SSC Member
- Total Posts : 796
- Reward points : 0
- Joined: 2015/08/12 11:27:56
- Status: offline
- Ribbons : 4
Re: EVGA Precision XOC 6.0.5
2016/08/30 03:12:48
(permalink)
c4s2k3Yeah, I kinda figured that much but really, I have to take my computer apart just to get a serial number even though the software already knows I have a 2-3 year old EVGA card in there? If you registered your card with EVGA it should be a simple lookup on the website under your account. You did register your card right? edit: oops, someone already mentioned this, sorry
Happy EVGA customer. Affiliate Code: 0Y7-1VU-ATW2 GigaByte X570 Aorus Master, AMD Ryzen 5900x under Optimus Foundation block, 32gb G.Skill DDR4 @ 3800 MHz 14-14-14-28, EVGA 3080ti FTW3 Ultra under Optimus block, 2TB 980 Pro SSD, EVGA Supernova G6 850W PS, ASUS 34" 3440x1440p 120Hz ultrawide, Lenovo 24" 1080p secondary monitor, Win 10
|
rsabatino
FTW Member
- Total Posts : 1169
- Reward points : 0
- Joined: 2010/02/04 14:00:46
- Location: new jersey usa
- Status: offline
- Ribbons : 6
Re: EVGA Precision XOC 6.0.5
2016/08/30 04:40:58
(permalink)
for some reason this program does not startup with windows automatically. it was easy with other builds before the xoc version . how do you do it now ? I have the startup with windows checked off on the facing menu.
post edited by rsabatino - 2016/08/30 04:46:01
Attached Image(s)
Operation System Microsoft Windows 11 Pro Processor AMD Ryzen 9 5950X 16-Core Processor Memory 24.2 GB Free (31.9 GB Total) Graphics Card NVIDIA GeForce RTX 3070 Ti (8.0 GB) Monitor HP 32 Display (1920 x 1080 @ 60 Hz) Disk Storage 5240.5 GB Free of 6542.2 GB Audio NVIDIA High Definition Audio Motherboard ASUSTeK COMPUTER INC. (ROG CROSSHAIR VIII HERO (WI-FI)) Mouse Razer BlackWidow V3 Tenkeyless Keyboard Razer Viper
|
redterror
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2006/03/21 18:53:47
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/30 08:10:21
(permalink)
Does anyone know if EVGA will include "CPU temperature" in GPU Statistics for the OSD like in PX16? I find it a useful tool when testing out games on my system.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA Precision XOC 6.0.5
2016/08/30 09:24:21
(permalink)
I'm sorry but this whole register thing is just ridiculous. I tried registering once but it kept coming back and I don't like posting my real name in many places. Like to keep that stuff private.
Also, I use HWiNFO64 and wouldn't want PrecisionX XOC conflicting with it.
I guess I'll be sitting this one out, again.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.0.5
2016/08/30 09:45:54
(permalink)
FattysGoneWild
Wiser87
bcavnaugh
FattysGoneWild
I sent a PM a few days ago about this here. Why is EVGA refusing to fix and acknowledge this issue?
Are you sure it is not HWiNFO64's causing your issue?
Have you tested this on another computer?
Could your WMI be corrupted, if so have you tried to repair it, have you ran sfc /scannow to see if you have or need some fixing.
Not seeing this myself but see a little when I start HWiNFO64
I only mentioned HWiNFO64 in that thread to show that other hardware monitoring programs don't have the same issue. Either EVGA is doing something odd with how they monitor hardware, or it's caused by the features for controlling hardware voltage/clocks/fans/etc. I've tried uninstalling Avast and closing background programs, but the issue only happens when PrecisionX (and PrecisionX OC) is running.
I just tested with 6.0.5 and confirmed that the problem still happens. I ran Sysinternals'/Microsoft's Process Monitor utility as administrator, confirmed that WmiPrvSE.exe (WMI Host Provider) was not in use, started PrecisionX OC, confirmed that the issue started only after it was running, exited PrecisionX OC, and confirmed that the issue stopped once PrecisionX's processes were no longer running.
There have been a couple times where I would close PrecisionX, but PXSW10_x64.exe would still be running in the background and would cause the WMI issue to continue happening. It's important to make sure there are no PrecisionX processes running when checking on WmiPrvSE.exe's usage for comparison.
ASUS' AI Suite 3 (not really a great program, but it works) also does hardware monitoring and control and is able to do so without causing the WMI Provider Host to constantly access tzres.dll and tzres.dll.mui.
Its fallen on deaf ears. They just continue to ignore it and not acknowledge the problem. I don't know what their get up is or problem over there.
Like I said above "Not seeing this myself but see a little when I start HWiNFO64" So it is a conflict with the Free HWiNFO64 Tool.
post edited by bcavnaugh - 2016/08/30 09:51:27
|
david91964
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/12/20 08:20:23
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/30 15:35:03
(permalink)
I tried the K boost button and precision x oc 6.0.5 freezes every time. I use a GTX950.
|
Wiser87
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2012/03/01 22:42:46
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/30 17:01:33
(permalink)
As I've said, too, the problem is occurring even when ONLY PrecisionX is running. I only used HWiNFO after encountering the problem to see if this was normal behavior from hardware monitoring software, which it is not. I've even ruled out the possibility of antivirus software causing the issue.
One other interesting behavior I've noticed is that starting and stopping PrecisionX results in entries being written to the Microsoft-Windows-WMI-Activity/Operational event log. By comparison, HWiNFO64, HWMonitor, and AI Suite 3 don't appear to create any WMI log entries.
I actually am a computer technician and I've done enough troubleshooting to know that the issue is being caused by PrecisionX. I've seen it mentioned that older versions of the program do not have this issue so somewhere along the line something was changed in the program that caused this to start happening. To be honest, it almost feels like I've done more troubleshooting on this issue in the past week than EVGA has in the past 4 months (granted, I have no way of actually knowing for sure, but that's what it feels like). What is the point of buying an EVGA card if I have to do their work for them?
|
Gatz85
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2016/07/06 11:16:15
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/31 09:21:21
(permalink)
Hey Wiser87 I have to Totally agree with you on that one. I would also like to shed some light on the subject as i recently bought me a 1070 GTXsc and running into a gauntlet of issues.
First There is a sub process being load Called WinRing0, Should be able to look at it under your services tab. This nice little bit of program Creates Fake Hardware to do the reading of the Cards.
Link here: github.com/cody82/open-hardware-monitor/tree/master/External/WinRing0
Now i know this is not the orginal code, but the authors website does not host the project anymore.
Link Here: openlibsys.org/
Now knowing this i would be almost 90% for sure that this is what you see as a leak.
The reason i figured this out because i was also trying to fix OCX for my card. Now of course i did the Normal "Rinse & Repeat of the Drivers & Software". Still my brand new card still was not detected.
Then i also cleaned my registry manually. No Luck! So i went digging as i always do, and Found our little friend WinRing0.
At this point i'm compiling everything i have found and ways to fix the card not being Detected and will make a formal post.
but in the mean time i hope this helps.
fixed links
|
right2carry1911
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2013/03/24 11:15:15
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/31 13:35:40
(permalink)
bcavnaugh
Brimy
bcavnaugh
Brimy
Did everyone else get this on first boot of the Precision x OC?
or
Just complete and post if it asks you over and over.
I fixed it already and i completed it to, was just wondering.
Mostly Users with Non EVGA Cards saw this.
I'm getting this on a EVGA 660 Ti SC, hell if I know the serial number. How do I get passed it?
|
DonaldTheGiver
New Member
- Total Posts : 49
- Reward points : 0
- Joined: 2012/02/16 06:19:41
- Status: offline
- Ribbons : 0
Broken - 2 Problems
2016/08/31 14:57:12
(permalink)
1. With this version installed with sli 980's it shows my graphics cards out of order, IE: 1 is 2 and 2 is 1
2. where is the information hidden for the install regarding the card registration, I uninstalled the software several times, deleted the install folder, killed the internet connection when reinstalling and am still not being prompted to enter that again, I was hoping maybe if I entered the serial number of my other card it would somehow manage to put my cards in the proper order in the software?
*** For those running EVGA cards and not knowing your serial number, why don't you still have your box, or why didn't you register your warranty information ***
|
Gatz85
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2016/07/06 11:16:15
- Status: offline
- Ribbons : 0
Re: Broken - 2 Problems
2016/08/31 15:09:38
(permalink)
HKEY_CURRENT_USER\SOFTWARE\EVGA
is where you find it in reg
|
Hazyone
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/08/30 18:08:02
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/31 16:03:36
(permalink)
Just installed my new 1060 card and downloaded PrecisionX OC v6.0.5. My system is running Win 10 64 bit, 32 g of RAM and an i7-4770 CPU. The installshield program gets to "The program features you selected are being installed" and hangs. I have to do a reboot to clear the process. PrecisionX 16 on Steam installed with no problems. OCScanner installed with no problems. Does anyone have any idea what's going on?
|
fakeyfakerson
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2006/05/01 20:53:35
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.0.5
2016/08/31 17:25:12
(permalink)
bcavnaugh
FattysGoneWild
Wiser87
bcavnaugh
FattysGoneWild
I sent a PM a few days ago about this here. Why is EVGA refusing to fix and acknowledge this issue?
Are you sure it is not HWiNFO64's causing your issue?
Have you tested this on another computer?
Could your WMI be corrupted, if so have you tried to repair it, have you ran sfc /scannow to see if you have or need some fixing.
Not seeing this myself but see a little when I start HWiNFO64
I only mentioned HWiNFO64 in that thread to show that other hardware monitoring programs don't have the same issue. Either EVGA is doing something odd with how they monitor hardware, or it's caused by the features for controlling hardware voltage/clocks/fans/etc. I've tried uninstalling Avast and closing background programs, but the issue only happens when PrecisionX (and PrecisionX OC) is running.
I just tested with 6.0.5 and confirmed that the problem still happens. I ran Sysinternals'/Microsoft's Process Monitor utility as administrator, confirmed that WmiPrvSE.exe (WMI Host Provider) was not in use, started PrecisionX OC, confirmed that the issue started only after it was running, exited PrecisionX OC, and confirmed that the issue stopped once PrecisionX's processes were no longer running.
There have been a couple times where I would close PrecisionX, but PXSW10_x64.exe would still be running in the background and would cause the WMI issue to continue happening. It's important to make sure there are no PrecisionX processes running when checking on WmiPrvSE.exe's usage for comparison.
ASUS' AI Suite 3 (not really a great program, but it works) also does hardware monitoring and control and is able to do so without causing the WMI Provider Host to constantly access tzres.dll and tzres.dll.mui.
Its fallen on deaf ears. They just continue to ignore it and not acknowledge the problem. I don't know what their get up is or problem over there.
Like I said above "Not seeing this myself but see a little when I start HWiNFO64" So it is a conflict with the Free HWiNFO64 Tool.
I have the same problem and I don't have HWiNFO64, so no, it's not a conflict.
|