Re: GTX 980 Ti Hybrid cooler orientation
2016/02/09 05:30:55
(permalink)
Thx for your reply Scarlet-Tech! :D
1: With a 2nd shroud that I cut, the original one will not be affected
2/3: They will be loose, that is my intention of the question. The case is tight and the tubes would jam against the case in the stock orientation. Because the GPU will not be in the MB slot, but used with a riser away from the MB, there is nothing bending the tubes.
So, in general I just want to know if it i the frontplate might interfear interfere?
Bottomline would be that I would take of the shroud, take of the cooler and put it back on. That doesn't void the warrenty, right?!