will get info together.
 
Thanks

hey guys on the stock 1.12 BIOS I was able to get a stable 4.5Ghz with XMP profile enabled and everything else was on auto... Then I updated to 1.18 and it was all down hill from there. I couldn't get it to do much of anything above 4Ghz on 1.18 so I switched to BIOS slot 2 and went back to v1.12... but still having the same issues.
 
Really weird how I'm not able to get back to 4.5Ghz!
 
Specs:

CPU: Intel i7 5960X
MBD: EVGA X99 Classified
RAM: 4 x 4Gb Corsair Vengeance 
HD: OCZ RevoDrive 240GB
GPU: 2 x EVGA 980 Ti in SLI
PSU: EVGA SuperNova 1300W G2
 
Really strange how I can't get back to the 4.5Ghz stable clock I got earlier... Just did a clean install of the OS to see if that helps stability. The really frustrating part is that after I set the previously stable settings, it gets stuck on POST... with A2 on the debug LCD. When this happens I have to clear CMOS and start over... ugh any ideas?

Seems like bumping up the voltage to 1.355 helped me stay solid at 4.5Ghz for now with XMP enabled... now if i could only get windows 7 reinstalled without it blue screening lol

Vlada011
Pay attention on temps.
Did you check max temps with 1355V?
You know that's huge success 4.5GHz with i7-5960X.
You overclock 8 cores 1.5GHz, or 1 GHz if you look Turbo Core.
That's amazing really, I would keep on 4.-4.2GHz...
Looks like X99 Classified is nice for overclocking CPU, same as Z77 FTW.

yea temps never got above 65C if I remember correctly. This was using windows 10 and doing a bunch of benchmarks (3dmark, AIDA etc) so I'm going back to windows 7 as Win10 isn't ready for primetime yet unfortunately.
 
This thing flies at 4.5Ghz but yea for the additional stability I'll probably keep it under that. I did have it running at 4.7Ghz for a while on my H100i but I don't know enough about what voltages need to be tweaked to really make it stable above 4.5Ghz.

Vlada011
You should put him under water. Really. It's nice processor and worth.
How big is your case? Mid tower or Full Tower. If you have space for 2x 240mm radiators you need to think easy on custom loop.
EKWB make some very simple and fast solutions.

Its the corsair 800D. Not really looking to spend more money on this thing hahah I think the H100i does a good enough job for now.
 
Specs: CPU i7 5960x
MBD: EVGA X99 Classified
RAM: Corsair Vengeance LPX DDR4 4 x 4GB 3000Mhz
PSU: EVGA 1300W G2
GPU: 2 x EVGA 980 Ti in SLI
HDD: OCZ RevoDrive x2 240GB

Vlada011
That's nice case, special I like people who make modification on side panel for cubic window.
For me is nicer than 900D. Special interior of 800D, one of most popular PC case ever and long time is atractive.

 
:D

 
Latest stable OC: 
 
http://valid.x86.fr/us0qm3
 

With other boards situation is not much better. People constantly complain on Rampage 5 Extreme.
I had pure suffering first days to force board to OC CPU at all. I had constantly BSOD when I change setting for overclocking with few other people with completely and absolutely identical situation as mine. Many users back Rampage 5 Extreme because many bugs... I advice you only to take look on Newegg and compare user experience for example some EVGA PSU 1000 P2, 1200 P2, 750 G2, EVGA GTX980Ti, TITAN X and on other side Rampage 5 Extreme... You will see what mean nice products and what mean buggy product. From one difference here you will get fast respond and many advice and with other manufacturer you need to pull with nippers every answer from their mouth. 
And I still don't know is it my mobo OK, I set everything just like I want... but off course I will try when summer pass to OC CPU more...
I only know that memory both kits are OK... CPU is very rear fault... and that sold me guy who work in ASUS Serbia... 
Some manager for Balkan or I don't know... If sold me fault processor I will kill him instantly 
And if you think that only is Classy make problem you are wrong... and same situation is on every forum... X99 have more problems than X79.
Some people are happy because they change on MSI, some because change on ASUS, some with GIGABYTE, it's always like that.
OK In my case X99 and 5820K now work as I want, but all of us want to everything work, it's not point to set some settings and than to scare to change. 
But when you have problem on one side than you have experience that with others situation is perfect, but not and with different brands/models people similar as you have own problems and think same for you.
 

enkrypt3d

Vlada011
That's nice case, special I like people who make modification on side panel for cubic window.
For me is nicer than 900D. Special interior of 800D, one of most popular PC case ever and long time is atractive.

 
:D

 
Latest stable OC: 
 
http://valid.x86.fr/us0qm3
 

Hi,
Could you post your mems setting and what kind of mems are you using ?
Thanks!
Never mind 😀 I saw it on your link !

I followed this exactly and I cannot boot past code 91 or 94. I had to switch over to BIOS 2 to get back into windows.

 
 
[<font][<font]Χαρακτηριστικά:
[<font][<font]Θερμοκρασία: χαμηλή 25-27, και 50-52 max !!
[<font][<font]Επεξεργαστής: Intel i7 5820k CUSTOM BLOCK ΝΕΡΟ 
[<font][<font]MBD: EVGA X99 FTW 
[<font][<font]RAM: 4 x 4 Gb Corsair Dominaitor 3300
[<font][<font]HD: Corsai Force LE SSD 240GB και Corsai Force GT SSD 120 X2 
[<font][<font]GPU: 1 x EVGA 780 Ti BLOCK διαβαθμισμένων CUSTOM ΝΕΡΟ 
[<font][<font]PSU: EVGA SuperNova 1600W P2
 
 
 
[<font][<font] 
 

EVGA_JacobF
 
Hardware used:
EVGA X99 Classified
Intel 5820K CPU
DDR4 2133MHz
 

And a PCIe 1.0 x16 gpu :P is that a 8800GTX?

4.9 Over Clock
 

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

ValkyrieStar

Tiffo60

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

Which EK block in particular? I'm running Acetal + Nickel supremacy Evo.

I swapped the jetplate and found a 10c drop but my temps are still hitting 70-75c, my room is 23-26 though.

exactly the same one, I put the plate and jet that was recommended in the paper work before I first installed it.