alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Hi guys and welcome to my build log for a mod I will be calling KRAIT VENOM. This will be my entry in the MSI PRO MOD Season 3. The theme will be based around the MSI Krait theme and will be all blacks and white. I will be transforming the Thermaltake Versa H34 and show that you don't need a high end expensive case to have a good looking PC :D Here are the main specs: Case - Thermaltake Versa H34 Motherboard - MSI Z170A Krait Gaming CPU - Intel i5 6600K Memory - 2 x 4GB G.Skill Ripjaws V 2800Mhz DDR4 Memory GPU - MSI GTX 960 SSD - Intel M.2 - 256GB Samsung SM951 PCI-E M.2 SSD PSU - Thermaltake Toughpower Gold 550W Cables - Icemodz Fully Custom Individually Sleeved Cables LEDs - Icemodz RGB LED Strips Thermaltake Custom Watercooling Radiator - Pacific RL360 White Edition Fans - 6 X Riing 12 LED White CPU Block - Pacific W2 CPU Water Block Pump - Pacific P1 Black D5 Pump w/ Silent Kit Reservoir - Pacific R22 Fittings - Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black Tubing - V-Tubler PETG Tube Coolant - Mayhems Aurora II Silver Here is a pic with the starting hardware, I will most likely use the AIO for the first stage of the build before doing a full custom loop. Thanks for checking it and stay tuned for more! Hope you guys don't mind me posting this here, I know some people have been following my work here before :) Cheers, Alex
post edited by alexciobanu - 2015/12/26 18:40:22
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/18 05:44:27
(permalink)
Always looking forward to your mods.
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/18 11:41:57
(permalink)
Have fun.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/19 18:55:12
(permalink)
rjohnson11 Always looking forward to your mods.
XrayMan Have fun.
Thanks guys :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/24 22:09:18
(permalink)
Here's a look at the case and it's disassembly :D
Thanks for checking it out! Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/27 05:09:11
(permalink)
Hi guys! Today I'd like to introduce you to the awesome MSI Z170A Krait Gaming motherboard and a i5 6600K Skylake CPU to go with it!
Thanks for checking it out! Cheers! Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/10/27 11:02:51
(permalink)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/03 01:22:17
(permalink)
rjohnson11 Looking good!
Cheer Robert! :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/05 07:28:09
(permalink)
Hi guys! Back with another update, this time I want to showcase the MSI GTX960 following with the black and white theme of the build :D
Just a few more hardware updates and the modding will begin :P Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/05 10:46:06
(permalink)
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2884
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/05 13:14:01
(permalink)
Can't wait to see how this turns out!
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/05 16:35:38
(permalink)
rjohnson11
nikkocortez Can't wait to see how this turns out!
Cheers guys :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/10 06:50:39
(permalink)
Hi guys! Time for another update! It seems like the MSI dragon has gotten out of his cage and into the build as I'm doing some test fitting with the Thermaltake Pacific RL360 Rad. The build looks like it will have a custom loop going in after all starting with this awesome and rather large rad compared to this case, already powdercoated in white by Thermaltake.
Once the test fitment is done, out with the dremel rotary, jig saw and scroll saw on this case before doing the paint job :)
Thanks for checking it out! Stay tuned for more! Cheers, Alex
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30908
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/10 07:17:49
(permalink)
Build looks interesting. With all the nice photos; where/how do you post them? There is no lag in the page loading, even with the large amount of photos. Looking forward to seeing the progress on the build.
|
stonder
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2015/08/06 01:14:36
- Status: offline
- Ribbons : 0
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/10 07:54:40
(permalink)
looks interesting, I will be follow your build!
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/14 00:50:28
(permalink)
Cool GTX Build looks interesting. With all the nice photos; where/how do you post them? There is no lag in the page loading, even with the large amount of photos. Looking forward to seeing the progress on the build.
Thanks man! All my photos are hosted on imgur, it's pretty good. I've been using it for a long time now stonder looks interesting, I will be follow your build!
Thanks a lot :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/14 17:23:57
(permalink)
Hi guys! Back with another quick update! I want to show you some more goodies. Awesome Thermaltake Riing fans with white LED and Thermaltake Thoughpower 550W PSU which will be more than enough for this build as well as the the G.Skill Ripsaws V DDR4 memory.
Thanks for checking it out and stay tuned for more! Cheers, Alex
|
uncle poop
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2012/01/11 09:56:18
- Location: dirty jerzey
- Status: offline
- Ribbons : 0
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/18 07:20:38
(permalink)
Good luck with the build, looking forward to the updates.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/19 23:22:53
(permalink)
uncle poop Good luck with the build, looking forward to the updates.
Cheers mate :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/19 23:24:15
(permalink)
Hi guys, All the rough cuts have been made on the case and it's pretty much all torn apart. It's now time to start working with some aluminum panels :)
First up I shortened the I/O bracket and also the motherboard tray
I completely removed the back as best as I could leaving just the PSU mount
Also there is a massive hole in the top as well with some simple mounting left
Made a cut out to clean up the front as well to better accommodate the front 360mm radiator
Thanks for checking it out and stay tuned for more over the coming days which might answer some questions as to where I'm taking this mod by removing so much of the original case :P Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/21 19:25:27
(permalink)
The motherboard tray is now mounted in it's new location. What I am doing is mounting the I/O to the top of the case to change things around a bit :P Here is the tray with the aluminum panel I made
The 90 degree aluminum corner bar is mounted there for a shroud to mount to once the motherboard tray is in the case. I will showcase this once done :) Also here is how I am mounting the motherboard tray panel to the top of the case. Using these brackets and other 90 degree aluminum corner bars and leaving a small compartment in the top for cables to connect with ease.
Hope you guys like the progress so far and stay tuned for more :D Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/22 06:35:29
(permalink)
Yes, this looks very good so far.
|
agent8
Omnipotent Enthusiast
- Total Posts : 8248
- Reward points : 0
- Joined: 2007/03/03 20:28:24
- Status: offline
- Ribbons : 20
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/22 08:39:24
(permalink)
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/22 18:43:16
(permalink)
Awesome so far.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/23 20:31:17
(permalink)
rjohnson11 Yes, this looks very good so far.
agent8 Looking good!
XrayMan Awesome so far.
Thanks a lot guys :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/24 16:13:30
(permalink)
Motherboard tray is in for test fitting and also so I can work on other stuff inside the case. You can now see the orientation more clearly :) Also please ignore any ugly screws for now and also the bare aluminum. In the end it will all be black.
You can see here the cutout I am going to make for a window on the back panel
Plenty of room for cables to connect to in the top
And plenty of room for cables in the back :D
Now time to go work on a shroud! Thanks for checking it out guys and stay tuned for more! Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/27 14:58:36
(permalink)
Hi guys, The shroud for the build is ready. It's from a 6mm thick piece of opal white acrylic. With some vinyl on it and an LED strip underneath, it should look pretty good :D
Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/28 00:36:31
(permalink)
Yes that shroud does look good.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/29 01:21:10
(permalink)
rjohnson11 Yes that shroud does look good.
Thanks a lot :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [MSI PRO MOD S3] - KRAIT VENOM
2015/11/29 01:25:58
(permalink)
Hi guys, Back with another small update on this project. I've laid most of the components down to sorta get a visual of things and see how I'm gonna paint things, make some covers, backplates and a lot of vinyl work. Everything to tie in to the black and white theme of the MSI PRO MOD S3 as well as the MSI Krait theme I've chosen :) This is how I usually work, just put everything together and get a good look at things and see what I can modify. I never start a mod with a set plan or design, just an idea of how things could look and most of it gets developed as I work on the system. Seeing what works and what doesn't as well as getting new ideas. Sometimes a mod can turn out differently as to how I see it in my mind the first time I get an idea. So what I have here is the Intel i5 6600K processor, 8GB of G.Skill DDR4, the MSI GTX 960 and on the motherboard you can see a Samsung SM951 256GB M.2 drive which will be the boot drive for this system. There is also an Intel 535 240GB SDD for some extra storage.
Firstly the RAM will definitely have to be painted white and I will most likely use white Plasi Dip on it just in case I will wanna take it back to stock in the future. I also have some spare ram covers from some Asus Sabertooth motherboards that I have. I will use two of those just to fill the other ram slots. If you're not sure what I mean you'll see in a future update :) I will be making a custom acrylic cover for the M.2 drive as well as for the Intel SSD and also a backplate for the GPU. I will use 2mm thick white acrylic with black vinyl design. I'm also thinking of making a simple I/O cover for the motherboard also from white acrylic. Thanks for checking out this update and stay tuned for more! Cheers, Alex
|