cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/18 15:49:40
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/19 13:57:58
(permalink)
Glad to hear the new vbios corrected the problem. Which one finally fixed it? The one I completely redid?
1430mhz...1420mhz..1408mhz...1420mhz... That is happening most likely because of how high your gpu temp is. Running the gpu fans higher should fix that.
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/19 14:59:35
(permalink)
Sajin
Glad to hear the new vbios corrected the problem. Which one finally fixed it? The one I completely redid?
1430mhz...1420mhz..1408mhz...1420mhz... That is happening most likely because of how high your gpu temp is. Running the gpu fans higher should fix that.
First post says it all In big bold words, check it out 
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/19 15:26:49
(permalink)
|
jonbuckles
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2014/01/01 16:26:02
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/26 18:22:41
(permalink)
phaseshift
How long does the process take for
"#3 Type nvflash --save Default_980Ti.rom"
Mine just says "NVIDIA Firmware Update Utility (Version 5.218) Modified Version by Joe Dirt
Make sure your using the correct nvflash for your system (windows 7/8/10 and 64/32 bit) Mine did that too once.. I think it was because I was using a windows 7 version on windows 10 ..
|
gpvecchi
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2009/04/19 12:35:57
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/28 12:26:54
(permalink)
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/29 13:26:17
(permalink)
gpvecchi
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
Not sure what you are asking for, could you re state the question in a different way  btw you can just download the one that Sajin made on the first post where I have it in bold text  It will work fine with your card even if it is a water cooled 980 ti if I remember correctly. (someone confirm this with me though) and It will have the voltage locked at 1.274v and the core at 1420 MHz it has worked so far for me flawlessly. I do get crashes in games but that is everyone who is running 355.98. Right now the drivers are sooo bad.... Go check it out in the GeForce forums. P.s. if you do flash this bios do not touch the overvoltage slider if you want to manually clock it. (disable overvoltage in precision x)
|
gpvecchi
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2009/04/19 12:35:57
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/09/30 13:10:30
(permalink)
I'd prefer to edi my bios, as it's a newer version; what I was asking is which is the maximum safe voltage for my card, and the max safe power limit...
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/02 00:34:36
(permalink)
Ah I see. There we go PM Sajin and see if the one that is made is safe to flash on my first post. If not he will gladly help you on maybe making one :)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/02 10:48:10
(permalink)
gpvecchi
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
You're correct. You can edit your own vbios using maxwell bios tweaker v1.36.
|
Atov361
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2015/07/31 21:41:11
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/03 15:55:02
(permalink)
Hey I got the same Card as you CDC 951.
And I cant pass the 1500 wall. Im getting PWR in PerfCap meaning that I need to push the TDP, so I can OC more lol.
Sajin made you a custom bios the 1420X should you recommend to upload that one? or the 980Ti-SC-425-1281mv ?
BTW, in running on a full custom loop.
Thanks buddy !
|
Atov361
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2015/07/31 21:41:11
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/03 16:33:01
(permalink)
This is my PC. Its a Z170 Classified with a i7 6700K. It has 3 EVGA 980ti's SSC and a EVGA 1300 G2 SuperNova. 
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/03 17:20:47
(permalink)
Atov361
Hey I got the same Card as you CDC 951.
And I cant pass the 1500 wall. Im getting PWR in PerfCap meaning that I need to push the TDP, so I can OC more lol.
Sajin made you a custom bios the 1420X should you recommend to upload that one? or the 980Ti-SC-425-1281mv ?
BTW, in running on a full custom loop.
Thanks buddy !
Use the one I linked in the home page in caps and huge letters 1420x and work your way up from there also open gpu-z and click the top left corner for all your cards and look for something called read asic quality. It is probably one of your cards not being a good overclocker. Report back on what your Asic is on all 3 cards :) mine is a 64.8 :( so I cannot go past 1420 MHz lol The higher your Asic is the better the overclocker it is  Also the newest drivers are very wonky with overclocking so it is not your fault. For now just overclock them a little and not go so hard on it till NVidia Drivers are cleaned up. May I ask what driver you are running? Try 353.62 Google it and let us know how it works out for you 
post edited by cdc-951 - 2015/10/03 17:35:31
Attached Image(s)
|
Atov361
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2015/07/31 21:41:11
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/03 19:18:35
(permalink)
I'm testing one by one, and the one I have installed right now. It has an ASIC of 82.9%. So I upload the 1420X correct ? 
post edited by Atov361 - 2015/10/03 19:20:53
|
Atov361
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2015/07/31 21:41:11
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/03 19:23:45
(permalink)
Before I read your post I uploaded the 980Ti-SC-425-1281mv.rom and know I have TDP @ 121% and 1.274 volt running the GPU.
But you say its better the 1420X ? than the one that Sajin said on the first page ?
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/04 00:55:19
(permalink)
Yup the one Sajin made 1420x is the best trust me and you need to give us the Asic of all 3 cards you got. You see in your gpuz photo there is a drop down bar that says 980 ti on the bottom left of the program. Click on that and change cards to read each cards asic and upload 3 different photos. Btw 82 is amazing so far
post edited by cdc-951 - 2015/10/04 02:18:51
|
gpvecchi
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2009/04/19 12:35:57
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/04 08:10:10
(permalink)
Sajin
gpvecchi
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
You're correct. You can edit your own vbios using maxwell bios tweaker v1.36.
Many thanks! Could you please check if this bios is correct? I Raised volteage to 1,281, TDP and power limit to 300W (just upping sliders). I left the 6 pins and 8 pins as in default bios, they seems to be both higher, but if ECGA set them in this way, they sould be safe... https://drive.google.com/...lvdVk/view?usp=sharing
|
Stay Puft
iCX Member
- Total Posts : 286
- Reward points : 0
- Joined: 2013/04/22 13:25:17
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/04 09:07:25
(permalink)
Atov361
This is my PC.
Its a Z170 Classified with a i7 6700K. It has 3 EVGA 980ti's SSC and a EVGA 1300 G2 SuperNova.
You need to put those cards on water
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/04 18:05:40
(permalink)
gpvecchi
Sajin
gpvecchi
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
You're correct. You can edit your own vbios using maxwell bios tweaker v1.36.
Many thanks! Could you please check if this bios is correct? I Raised volteage to 1,281, TDP and power limit to 300W (just upping sliders). I left the 6 pins and 8 pins as in default bios, they seems to be both higher, but if ECGA set them in this way, they sould be safe...
Looks correct.
|
cdc-951
SSC Member
- Total Posts : 520
- Reward points : 0
- Joined: 2012/04/27 02:26:30
- Status: offline
- Ribbons : 1
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/04 21:30:21
(permalink)
Stay Puft
Atov361
This is my PC.
Its a Z170 Classified with a i7 6700K. It has 3 EVGA 980ti's SSC and a EVGA 1300 G2 SuperNova.
You need to put those cards on water
I think those cards should do just fine, the acx cooler is amazing
|
gpvecchi
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2009/04/19 12:35:57
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/10/06 12:18:29
(permalink)
Sajin
gpvecchi
Sajin
gpvecchi
Guys, I'd like to edit the bios of my 980 Ti Hybrid, to achieve the followigìng:
Max safe voltage (I assume first slider to 1.281)
Max power limit and/or TDP (I assume 75W+75W+150W, even if my bios seems higher for 6 pins)
Keep stock boost, and stock at default values of PrecisionX, but maxed when moving the sliders...
Could someone suggest me? Thanks!
You're correct. You can edit your own vbios using maxwell bios tweaker v1.36.
Many thanks! Could you please check if this bios is correct? I Raised volteage to 1,281, TDP and power limit to 300W (just upping sliders). I left the 6 pins and 8 pins as in default bios, they seems to be both higher, but if ECGA set them in this way, they sould be safe...
Looks correct.
Great, many thanks, I'm going to test it!
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/15 12:37:06
(permalink)
Hello I have this videocard i need your advices
Part Number: 06G-P4-4992-KR
Part Desc: EVGA GeForce GTX 980 Ti Superclocked
my asic 83.7
I flash bios
Originally Posted by Sheyster View Post
980 Ti MAXAIR BIOS for reference cards
This BIOS is intended for those who want to max out their OC on the stock cooler.
- Based on EVGA 980 Ti SC reference BIOS
- 1.250v at load
- 425W at 121% - 350W at 100%
1.250v at load.
I can get stable- 1610/8000 but my result in ungine heaven only 2643score-1080p , i think it too low? Everything cooled by water temperature max39-41
My components 5820-4.4ghz/msi xpower x99ac/16gb-3200ghz/1000w/windows8.1/358.50driver-full power,one display
can somebody check this bios, or give me more better bios because score must be 2800-2900
Wait your advises ,thank your very much for help
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/15 13:12:54
(permalink)
tdp is low, why? 
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/15 15:19:16
(permalink)
614318
score must be 2800-2900
Whose score are you trying to match?
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 01:55:19
(permalink)
 fyzzz --- i5 4690k @ 4.9 GHz --- Gigabyte GTX 980 Ti @ 1520MHz / 2003MHz --- 107.6 --- 2709  fyzzz --- i5 4690k @ 4.8 GHz --- Gigabyte GTX 980 Ti @ 1521MHz / 2078MHz --- 109.0 --- 2746  Xevi --- G3258 / 4.6 Ghz---- eVga KPE 980Ti 1527 / 8802 ---- 113.6 ---- 2862 --- 1.18vGpu/1.66vMem  ssiperko --- 5960x / 4.6 ---- 980 ti G1 1590 / 8100 ---- 109.3 ---- 2753
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 12:26:54
(permalink)
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 12:32:56
(permalink)
Whose score are you trying to match? Can you edit my bios please anlock tdp 425w or lower and put 1.25voltage on monitoring gpu usage going 76-82% -it is not right and most time 98% Thank you very much! 
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 12:43:36
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 13:06:44
(permalink)
☄ Helpfulby cdc-951 2015/11/18 15:06:17
614318
Whose score are you trying to match?
Can you edit my bios please
anlock tdp 425w or lower
and put 1.25voltage
on monitoring gpu usage going 76-82% -it is not right
and most time 98%
Thank you very much!
Editing the vbios isn't going to help the drops in usage. It's normal for the usage to drop in certain areas in the bench.
|
614318
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2013/06/07 01:15:21
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2015/11/16 13:20:42
(permalink)
On my old titan i have the same problem .
I download bios from overclock.net and it work like my 980ti
but i find forum.techinferno.com and download from here bios and videocard stated work perfectly
now they did not edit vbios for 980ti
|