Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: EVGA PRO SLI Bridge V2
2015/08/22 02:59:46
(permalink)
Airbrushkid
I think you wrong. EVGA says there suppose to be included with the SLI PRO Bridge V2. So you can change the color of the lite up EVGA part of the bridge to Red, Blue or Green.
Plus think about it. Why would they send these different color stickers to put on the bridge if you cannot see the color!!
Pgcmoore
Airbrushkid
I finally got the 3 black pieces of plastic with the word EVGA in red, green and blue. They are stickers! If you place them on the outside of the bridge they don't really light up that good. So I don't really know how they are suppose to work.
sounds like they are for cards that do not light up the bridges...maybe????
just going by your picture, i dont have them, but seems like a silly way to do it anyway
"This program has performed an illegal operation and will be shut down"  My Affiliate Code is 05G-UGD-GZVU
|
Airbrushkid
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2007/09/21 23:21:25
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/22 03:17:53
(permalink)
It's hard to tell when they don't give any instructions how to do. Pgcmoore
Airbrushkid
I think you wrong. EVGA says there suppose to be included with the SLI PRO Bridge V2. So you can change the color of the lite up EVGA part of the bridge to Red, Blue or Green.
Plus think about it. Why would they send these different color stickers to put on the bridge if you cannot see the color!!
Pgcmoore
Airbrushkid
I finally got the 3 black pieces of plastic with the word EVGA in red, green and blue. They are stickers! If you place them on the outside of the bridge they don't really light up that good. So I don't really know how they are suppose to work.
sounds like they are for cards that do not light up the bridges...maybe????
just going by your picture,
i dont have them, but seems like a silly way to do it anyway
Intel 4770k l Asus Sabertooth Z97 Tuf 2 l 32 gig Corsair Dominator Platinum DDR 2133 l 2 - eVGA GTX 980's SC Ref SLI l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD l WD 3 - 4TB l On board sound l Corsair AX1200i l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
|
Amish Ace
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2015/08/25 19:12:42
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/25 19:14:18
(permalink)
Does anyone know if this bridge (LED illumination and functionality) will work with the Zotac Amp Extreme 980ti?
Thanks,
|
rrolsheim
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/08/19 10:38:18
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/26 19:09:01
(permalink)
I have EVGA GTX 980Ti superclocked cards in SLI and the long bridge completes the look.
The flexible ribbon bridge just looked so....so....blah.
The illuminated white EVGA lettering (also comes with red, blue, and green overlays) on the bridge complements the white lettering on the EVGA 980 Ti cards.
Yes, it may be bling, but it is great looking BLING!!!
Love it!!!
|
jeffreyf123
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2015/03/04 03:42:52
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/27 08:27:47
(permalink)
Quick question if someone doesn't mind answering. Been trying to figure out which Bridge I'd need... I have the Asus Maximus Hero 7 mobo. I figured it would be just the standard but wasn't sure and thought I'd ask here. Can anyone provide some insight? Thanks in advance!!
|
Airbrushkid
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2007/09/21 23:21:25
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/27 20:50:57
(permalink)
It would be the 2 way sli Long. Same one I am using on a Asus Z97 Sabertooth. http://www.newegg.com/Pro...gUIzg&gclsrc=aw.ds jeffreyf123
Quick question if someone doesn't mind answering. Been trying to figure out which Bridge I'd need... I have the Asus Maximus Hero 7 mobo. I figured it would be just the standard but wasn't sure and thought I'd ask here. Can anyone provide some insight? Thanks in advance!!
Intel 4770k l Asus Sabertooth Z97 Tuf 2 l 32 gig Corsair Dominator Platinum DDR 2133 l 2 - eVGA GTX 980's SC Ref SLI l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD l WD 3 - 4TB l On board sound l Corsair AX1200i l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
|
Airbrushkid
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2007/09/21 23:21:25
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/27 20:53:20
(permalink)
I got a message from EVGA. There just stickers that stick to the outside of the bridge. Which suck!! I tried the blue one and you can barely see the blue lite up in the dark.
Intel 4770k l Asus Sabertooth Z97 Tuf 2 l 32 gig Corsair Dominator Platinum DDR 2133 l 2 - eVGA GTX 980's SC Ref SLI l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD l WD 3 - 4TB l On board sound l Corsair AX1200i l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
|
Airbrushkid
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2007/09/21 23:21:25
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/08/29 07:31:13
(permalink)
Thank you for posting this video. The stickers that EVGA supply with the pro bridge to are useless. I picked up a blue folder/pouch from wally world last night and just got done tearing apart my bridge and putting 2 small strips of the blue in it. It looks sweet!! Again thank you. Pgcmoore
brianfist101
I just purchased a V2 Long SLI Bridge. It did not come with the color stickers to change LED light color. Where do I get this? See link to see what I'm talking about.
I picked up the film on Amazon for a couple bucks to do mine
here ya go
Intel 4770k l Asus Sabertooth Z97 Tuf 2 l 32 gig Corsair Dominator Platinum DDR 2133 l 2 - eVGA GTX 980's SC Ref SLI l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD l WD 3 - 4TB l On board sound l Corsair AX1200i l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
|
kurokawaLuxFact
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2014/06/15 02:47:57
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/09/02 16:51:18
(permalink)
Hi, I just got mine today and its light is not working. Is there anything I have to install or to do to make the light works? what is the difference of having its lights On and Off?
I am using 2way/3way SLI bridge v2 for my 2way slit gtx770 4gb FTW.
Please let me know if I am missing any info Thank you.
|
Airbrushkid
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2007/09/21 23:21:25
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/09/03 06:52:33
(permalink)
It only works with select cards. Yours doesn't seem to be on the list. Select EVGA GTX 770 graphics cards. - 02G-P4-2770-KR
- 02G-P4-2771-KR
- 02G-P4-2773-KR
- 02G-P4-2774-KR
- 02G-P4-3770-KR
- 02G-P4-3771-KR
- 04G-P4-3773-KR
- 04G-P4-3774-KR
I could be wrong, but this is from there website. here's the link http://www.evga.com/articles/00919/EVGA-Pro-SLI-Bridges-V2/ Contact them and ask.
post edited by Airbrushkid - 2015/09/03 06:54:54
Intel 4770k l Asus Sabertooth Z97 Tuf 2 l 32 gig Corsair Dominator Platinum DDR 2133 l 2 - eVGA GTX 980's SC Ref SLI l Intel 750 Series 1.2TB PCIe NVMe 3.0 x4 SSD l WD 3 - 4TB l On board sound l Corsair AX1200i l Windows 7 Ultimate 64 bit l 3 X Dell E248WFP 24" Monitors
|
kurokawaLuxFact
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2014/06/15 02:47:57
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/09/04 06:54:13
(permalink)
Thank you Airburshkid, Mine is not on the list I have 3776-KR. Is the performance will still be the same even if there's no light or it has changes if the light is on?
|
subroto
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2013/02/09 07:16:47
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/09/24 10:02:12
(permalink)
kurokawaLuxFact
Thank you Airburshkid, Mine is not on the list I have 3776-KR. Is the performance will still be the same even if there's no light or it has changes if the light is on?
The performance is the not affected by the light.
|
seantraynor
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2007/03/07 16:51:50
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/09/28 11:18:57
(permalink)
Hey guys,
I'm having issues with my 3 way (only using it on two cards)
When I first got it, around a month ago, it lit up fine
Now though, it doesn't light up at all.
When I switch the computer on I can see the LED flashes, but that's it. Am I doing something wrong?
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/09/28 11:23:02
(permalink)
Have you tried resetting the controller? My controller basically timed out after a while, and I have to go in and tell it to light up.. Once I do that, it works for a week or two.
|
iowa.dom
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2015/09/25 21:37:55
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/09 21:10:06
(permalink)
Good Evening: Not sure if anyone has confirmed yet. But I wanted to post that the EVGA Pro SLI 2-Way Long works just fine with the Gigabyte GTX 970 G1 Gaming. (Please don't hate on me too much for going with Gigabyte). I attached the SLI Bridge, lit right up. No Issues, No Additional Software.
post edited by iowa.dom - 2015/10/11 19:38:18
|
Vanillaice
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2015/10/15 03:19:41
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/15 03:41:40
(permalink)
Hello! I connected two EVGA GTX 980ti 06G-P4-4992-KR to EVGA PRO SLI Bridge V2, but the LED does not work. What could be the problem?
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/10/15 05:16:23
(permalink)
Vanillaice
Hello! I connected two EVGA GTX 980ti 06G-P4-4992-KR to EVGA PRO SLI Bridge V2, but the LED does not work. What could be the problem?
What are you using to control it? The led visualizer is required. It is unfortunately in GeForce experience, if you use that horrible experience software. If not, then go into your c drive, program files and find the driver. Open the driver folders and the visualizer is directly part of the driver and you don't have to use the gfe. I can't get the exact link, but someone here will post it. Give that a try.
|
iowa.dom
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2015/09/25 21:37:55
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/16 05:42:43
(permalink)
Here is a before and after photo of the SLI Bridge 2-Way Long in my Rig Without Blue Sticker  With Blue Sticker 
post edited by iowa.dom - 2015/10/16 05:46:37
|
Doctor K
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2009/10/13 13:52:05
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/22 16:17:11
(permalink)
I have two Titan Blacks on an ASUS Maximus VI GENE. Which length do I need? Here's a pic: 
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/10/22 16:32:15
(permalink)
Doctor K
I have two Titan Blacks on an ASUS Maximus VI GENE. Which length do I need? Here's a pic:
Should be a short bridge. 40mm length.
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: EVGA PRO SLI Bridge V2
2015/10/22 16:59:53
(permalink)
Scarlet-Tech
Doctor K
I have two Titan Blacks on an ASUS Maximus VI GENE. Which length do I need? Here's a pic:
Should be a short bridge. 40mm length.
yes, this one Part Number: 100-2W-0024-LR actually i think you could also use this one too, if you want the wider look P/N: 100-3W-0032-LR they are both the same length, the 2-3 way attaches to both slots
post edited by Pgcmoore - 2015/10/22 17:16:55
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
e29gr8t
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2013/03/21 23:16:56
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:00:45
(permalink)
My pro V2 bridge LEDs just stop working. I dont know why
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:05:45
(permalink)
e29gr8t
My pro V2 bridge LEDs just stop working. I dont know why
Go into the led controller and try turning it back on. The driver resets it occasionally. If that doesn't work, then it may need to be replaced.
|
e29gr8t
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2013/03/21 23:16:56
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:14:43
(permalink)
I have done everything, from uninstalling Driver, Precisionx 16, reinstalling Geforce experience, and had everything back to stock.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:17:51
(permalink)
e29gr8t
I have done everything, from uninstalling Driver, Precisionx 16, reinstalling Geforce experience, and had everything back to stock.
You are going to need to provide a little more details. Which bridge is it, 2 way long, 2 way short, triple? Did you try moving the bridge to different fingers if it is a 2 way bridge?
|
e29gr8t
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2013/03/21 23:16:56
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:19:08
(permalink)
Scarlet-Tech
e29gr8t
I have done everything, from uninstalling Driver, Precisionx 16, reinstalling Geforce experience, and had everything back to stock.
You are going to need to provide a little more details. Which bridge is it, 2 way long, 2 way short, triple?
Did you try moving the bridge to different fingers if it is a 2 way bridge?
its a three way bridge..
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/10/24 22:23:22
(permalink)
e29gr8t
its a three way bridge..
Then you may need to set up an RMA. If you could, go into the c: drive, program files (can't remember which one specifically, but look for Nvidia folder.. it may be the x8 PF folder) nvidia, then the driver folder and led visualizer. Open that, select the Sli bridge specifically, and try it one more time. Hopefully it isn't in need of an rma. Also, make sure to deselect "on with sli" and leave it to static on.
|
aryan51
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2015/09/18 16:12:31
- Location: winnipeg, manitoba
- Status: offline
- Ribbons : 0
Re: EVGA PRO SLI Bridge V2
2015/11/06 17:06:50
(permalink)
will the led work on the 980ti kingpin?
The Reaper" Build - 2 GTX 980Ti Kingpin Graphics Cards 80% + ASIC - EVGA Pro SLI Bridge V2 - EVGA Supernova 1600 Watt T2 Power supply - Leet Case w/ 7" Samsung LCD Screen w/ Full IR Functionality - Corsair Dominator Platinum 64GB DDR4 2800MHz Timings are 14-16-16-31 Voltage: 1.35V - CPU Intel 5960X - Motherboard Rampage 5 Extreme Version 3.1 - M.2 Drive Intel 750 2.5 1.2TB PCIE NVME 3.0 X4 - CPU Cooling EK-Supremecy EVO Elite Edition Intel 2011-3 - Graphics Cards Cooling EK-FC980 GTX Ti Classy KPE-Nickel X2 w/ 2 Red LEDs EK FC980 GTX Ti Classy KPE Backplate-Nickel - Ram Cooling EK-RAM Monarch X4-Nickel X2 w/ 2 EK Red Tops w/ 2 Red LEDs - Motherboard Cooling EK-FB KIT ASUS R5E-Nickel - Rads 120 mm EK-CoolStream PE 120 (Single) & EK-CoolStream PE 240 (Dual) - 4 Noctua NF-F12 industrialPPC 3000 PWM 120mm Fan sleeved in red - EK-ACF Fitting 10/16mm - Red - Tim Thermal Grizzly ther
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA PRO SLI Bridge V2
2015/11/06 17:41:12
(permalink)
aryan51
will the led work on the 980ti kingpin?
Yes
|
ragevirusqq
iCX Member
- Total Posts : 446
- Reward points : 0
- Joined: 2015/11/10 17:37:56
- Status: offline
- Ribbons : 3
Re: EVGA PRO SLI Bridge V2
2015/11/20 13:55:53
(permalink)
I have evga x99 classified and 2 980ti ftw in the first and 3rd slot I think (i am at work an cant remeber the slot number but it is both x16 slots). Will the 3 way fit?
CaseLabs SM8 - X99 Classified - EVGA 1080ti - 5930k @ 4.5 - 32GB Hyper X predator - 480mm x2 and 360mm rads for super low fan speed and quiet operation- EK blocks and pump/res - All Bitspower black fittings - 1Tb samsung 850 evo 2tb total ssd space - EVGA 1300G2 - Predator X34 - Mayflower Objective 2 DAC/AMP - Beyerdynamic DT990 Pro - Sennheiser HD6xx - Mackie CR4 monitors
|