Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/07/12 20:24:07
(permalink)
alexciobanu
Pgcmoore
Very nice work, love the vinyl graphics. Which brand is that? I have not had much luck with what I had tried to use on some drive cases. Got a link?
Gets my vote!
Looking forward to more
Thanks :D
I'm not sure what brand it is, I just get it of eBay and keep trying different ones until I can find a really good one to stick with. This one seems to be pretty good and all vinyl for this project has been bought from them. Check it out here :)
Excellent, thanks for the link!. I just ordered some 3M DI-NOC through Amazon for my latest little project, only doing a few trim pieces, backplates and brackets I had to mod but looks promising. I like the simulated weave (match's some of the sleaving I'm using) http://www.amazon.com/gp/...aui_detailpage_o00_s00
"This program has performed an illegal operation and will be shut down"  My Affiliate Code is 05G-UGD-GZVU
|
rlb9682
FTW Member
- Total Posts : 1049
- Reward points : 0
- Joined: 2009/02/26 08:23:20
- Status: offline
- Ribbons : 11
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/07/14 08:14:44
(permalink)
That's a pretty amazing job with the wrap. You must have a LOT of patience! It looks great.
Affiliate Code: PD1HHD50JK
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/07/20 00:47:55
(permalink)
Pgcmoore
Excellent, thanks for the link!. I just ordered some 3M DI-NOC through Amazon for my latest little project, only doing a few trim pieces, backplates and brackets I had to mod but looks promising. I like the simulated weave (match's some of the sleaving I'm using)
http://www.amazon.com/gp/...aui_detailpage_o00_s00
Sorry for the late reply. Yea di-noc wrap is pretty cool, I used some in my Vault Boy build :) rlb9682
That's a pretty amazing job with the wrap. You must have a LOT of patience! It looks great.
Thanks a lot :D Yea takes a lot of patience :)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/07/24 19:19:27
(permalink)
Hey guys,
Updates on this build will start to flow again now. Been super busy with moving over the last few weeks and now I'm still waiting on internet to get connected, posting this update from work.
Here is the vinyl work I did for the RAM, follows the same style as the rads.
Thanks for checking it out!
Cheers,
Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/06 00:36:16
(permalink)
Hey guys,
Cleaned up the PSU a little bit with some vinyl. Also I have all other bits of components still needed for this build currently on the way :D. Lots of awesome goodies on the way!
Thanks for checking it out!
Cheers,
Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/06 03:44:19
(permalink)
Absolutely love your mods.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/06 20:36:49
(permalink)
rjohnson11
Absolutely love your mods.
Thanks a lot Robert, much appreciate it :D
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/12 10:28:47
(permalink)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/12 21:27:38
(permalink)
XrayMan
Very nice work.
Thanks a lot :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/13 22:42:09
(permalink)
Hey guys,
Here's a quick look at the awesome fittings Primochill sent. These are their Rigid Revolver fittings that I will be using throughout the build. Huge thanks to Primochill and make sure to check out their online store for all their watercooling and modding products line-up - www.primochill.com
Thanks for checking it out!
Cheers,
Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/13 23:10:21
(permalink)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/08/15 18:07:10
(permalink)
rjohnson11
Very nice fittings.
Cheers :D
|
VVhiplash
iCX Member
- Total Posts : 392
- Reward points : 0
- Joined: 2011/06/15 11:42:22
- Location: U.S.A
- Status: offline
- Ribbons : 1
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/09/02 16:01:12
(permalink)
I have never beheld an acrylic pc even 1/100th part as gorgeous as this. I am MAD jealous of your modding skills. Superb job!
ll Steiger-Dynamics Maven ll Intel i7-5930k 4.2Ghz ll ASRock X99 Extreme6/AC ll Liqmax II 240 ll GeiL Super-Luce 32gb 2666mhz ll (x2)EVGA GTX 980 SC ll Samsung XP941 500gb and 850 Pro 1TB ll EVGA PS 1000W Platinum ll
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/09/02 19:16:08
(permalink)
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/09/03 07:16:28
(permalink)
I like your 850 G2 PSU...
Maybe and EVGA should think about for next models to print everything with some ultra durable paint instead of label.
Must find absolutely perfect fonts, size, color and to print both side.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2015/09/04 22:19:48
(permalink)
Vlada011
I like your 850 G2 PSU...
Maybe and EVGA should think about for next models to print everything with some ultra durable paint instead of label.
Must find absolutely perfect fonts, size, color and to print both side.
Thanks, glad you like it. Was a really quick mod to do :) Yea that's a pretty good idea :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/17 20:10:20
(permalink)
Hey guys!
Been a long time since I've made an update in this build log! Just been caught up with other builds and competitions as well as, stated from the start of the log, this is a build I have been working on for a mate and he's had trouble acquiring the rest of the parts.
I have everything I need in order to get this build finished now so I'm ready to push ahead with it.
Firstly I would like to showcase the awesome cables provided by Mod/Smart for this project. They are done from red and white paracord sleeving. They look awesome and will fit the build really well.
Thanks for checking it out guys and apologies for the delays with this build!
Stay tuned for more!
Cheers,
Alex
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/17 20:24:59
(permalink)
Very nice Mods and great build quality. Look forward to more updated.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/18 14:48:49
(permalink)
Cool GTX
Very nice Mods and great build quality. Look forward to more updated.
Thanks a lot, much appreciated :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/20 15:36:35
(permalink)
Hey guys,
Here are some more progress shots!
I did some similar vinyl work as on the rads, on the pump and also added a patch of vinyl to the bottom of the case just to give it some more contrast. The rest will be covered by the rads and motherboard tray.
Have a look and sorry for the dark shots, this was just after I did it. I will have better pics of this soon.
There is also a package of watercooling goodies that arrived from PerformancePCs! It's stuff like this that PerformancePCs are good at, I think they stock the largest amount of watercooling and modding gear in the world and they have every possible little thing you might need.
If you haven't already, it's really worth checking them out! They have international shipping with Fedex or DHL which arrives withing 3 to 4 business days and if you make a large enough order the shipping fee is pretty decent.
Have a look what I got for this order, mainly small things I couldn't find anywhere else in Australia.
All the fans and lights will be connected to this PCB to help with cable management.
Different pump top for the DDC pump and the Bitspower upgrade kit with the res.
Also got the multi port top and an aquapipe to return the loop to the top of the res.
And this is something I've wanted to get for a while. The Phobya external power supply.
It's really good for outside testing of fans, lights and even running a pump test or something, good and handy to have.
Simple molex connector and you can just connect a small PCB with different connectors to that.
That's it for this update guys!
Stay tuned for more!
Cheers,
Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/21 17:07:19
(permalink)
Hey guys,
Following with yesterday's update. Here are some better shots of the pump and res combo from Bitspower with the small vinyl work done.
The CPU was also received from my good friend at DG Mods - https://www.facebook.com/...chandHardware/?fref=ts
The CPU is a 4790K, delidded and lapped with a tested roughly 20C drop in load temps :D
Thanks for checking it out guys!
Cheers,
Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/21 22:39:08
(permalink)
Looking great so far. The pump looks good.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/22 07:16:29
(permalink)
Power supply now look nicer than original.
I would like to my look similar, instead label I would to write EVGA 1200 P2.
With light and dark grey color.
Maybe even absolutely same as now only paint instead label.
That's only part in my PC strictly for me. All others could be sold when time come for upgrade except PSU.
Because of that I payed 75 euro for Sleeve Cables because I was sure that he will stay.
Now worth more then new. Emotional value is much higher.
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/22 11:42:11
(permalink)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/24 19:02:11
(permalink)
rjohnson11
Looking great so far. The pump looks good.
Thanks Robert :D Vlada011
Power supply now look nicer than original.
I would like to my look similar, instead label I would to write EVGA 1200 P2.
With light and dark grey color.
Maybe even absolutely same as now only paint instead label.
That's only part in my PC strictly for me. All others could be sold when time come for upgrade except PSU.
Because of that I payed 75 euro for Sleeve Cables because I was sure that he will stay.
Now worth more then new. Emotional value is much higher.
Cheers mate! Yea I understand how you can get attached to a component or a build, sometimes it's hard for me too, having to pull apart a mod Sleinous
Lovin' it!!!!
Cheers :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/24 19:22:59
(permalink)
Hey guys,
Today I give you a better look at some of the components mounted inside the case and the cable management that was done so far.
The pump/res combo is mounted straight into the bottom of the case, through the acrylic.
24pin and 8pin cables are connected along with the pump and fan cables.
It's pretty easy to work on a build when you can have both side panels and the top off like this.
The cable management so far, looking pretty good. Mostly thanks to custom cables and the awesome PCB to connect all the fans to.
That's it for now guys!
Thanks for checking it out!
Cheers,
Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/29 02:13:38
(permalink)
Hey guys!
Just wanna showcase the two ASUS Strix GTX 970 that are going in this build!
Check them out!
Cheers,
Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/30 03:44:47
(permalink)
Nice, looking forward to more pics.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/30 09:57:32
(permalink)
Vry nice custom build
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: [Project Log] PARVUM FORMULA (custom one-off Parvum S2.0)
2016/01/30 22:57:04
(permalink)
rjohnson11
Nice, looking forward to more pics.
Cool GTX
Vry nice custom build
Thanks guys :D
|