Hello everyone!
My Name is Ronny.I would like to present you my Project.
I wanted to see my Hardware and all components under a glass top.
So i build a Showcase as a desk.I startet my Project in february and work every day and every Weekend.
So slowly, it´s done.
Here the final pics and then the worklog.
the complete worklog as a video
?
Installing the Hardware as video
?
all right, lets go
my basic idea
i buy Wood and take MDF
i dowel and glue it, make the fan holes, installed the fan grills, a power supplie bracket and as you can see the Mainboard tray
then i installed the aluminum angle
and i painted it with spray can
ready
and i needed a cover for cable channel
now i had to design the base frame
i welded and painted it
then i need the drive bracket, i take remains aluminum angle and acrylic glass
the same for the HDD bracket with more style
i have installed many LED´s
READY
i had black Radiators and paint them white
later i got Sponsor a alphacool Monsta from
well, i make all cable with paracord sleevs, was a good weekend
the LED´s with sleevs
a few ports for light and fan
the buttons and switches
a Weekend of work with tubing
the insulation
then i make a acrylic plate for the Mainboard for more clean optik
i have covered them with foil. Aluminum black brushed
on backside i used foam rubber for cable let through
the same foil for all drives and hdds
then i make a aperture for temperature display
with reflectors and more White acylic for better light scattering
i paint the Reservoir´s from nickel to black
and make a Little cover for the Buttons-, Switches cable inside
I am finished
A big thanks to Sponsors that enabled it
Aquatuning
EKWB
Blacknoise
Cooler Master
post edited by capten - 2015/08/02 06:53:34