georgep001
iCX Member
- Total Posts : 335
- Reward points : 0
- Joined: 2010/08/18 12:16:02
- Status: offline
- Ribbons : 1
Re: EVGA Classified SR-X/SR-2 Compatible Chassis
2013/10/27 09:57:41
(permalink)
Does the corsair 900d fit the sr2?
Setup: Mobo: Evga SR-2 Processor: 2 Intel Xeon X5650 @ 4.5Ghz with turbo enabled Ram: Patriot Sector 7 48GB 1600mhz Cooling: 2 Corsair Hydro H80 Cpu cooling Psu: 1 Silverstone 1500w Harddrives: Intel x-25m 80gig ssd c drive, Western Digital 1TB Sata 3 Drive, Seagate 1TB Sata 2 Drive Case: Lian Li PC-V2120 Videocards: 4 GTX Titans sli Monitor: Acer touchscreen 23inch Os: Windows 8.1 Professional 64bit edition Keyboard: Steelseries stealth Mouse: Logitech trackball Speakers: Logitech Z-5500 Digital 5.1
|
DraginElite
CLASSIFIED Member
- Total Posts : 4394
- Reward points : 0
- Joined: 2008/05/01 18:47:28
- Location: My Own Little Corner
- Status: offline
- Ribbons : 17
Re: EVGA Classified SR-X/SR-2 Compatible Chassis
2013/12/21 14:19:32
(permalink)
|
Kelz4EvErGamerz6595
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2013/12/25 11:18:20
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2013/12/25 11:47:11
(permalink)
With many of us having built some "Hot-Rodded" Rigs over the past 3-5 years and are now looking towards the future of Gaming MoBo's and Next Gen Hardware to utilize with these beasts...I'm surprised to "NOT" see my Chassis on the list of approved Sized cases. I built the "Dream Machine" of 2008 from Maximum PC Magazine and utilized the Cooler Master Cosmos 200 Case which is by design already setup and "Good 2 Go" for a 3 or 4 Card SLI Configuration. This case is a Beast! and there is now the 2nd Generation of the case which has a Fancy Paint Job [If you're into that]. If there's some reason as to why this case didn't make it to the "List", PLEASE somebody speak now or forever hold your circuits...because I plan on purchasing this MOBO..and going for broke on all of the Best of the Best Hardware/Vidware/Soundware Money can buy to put onto this Lovely beast [the ZR-X/ZR-2] and then send in a step-by-step Build-Up of the system to MAximum PC..Those guys just LOVE to drool over new builds! LoL - Kel
|
sam nelson
iCX Member
- Total Posts : 365
- Reward points : 0
- Joined: 2014/01/06 21:07:07
- Status: offline
- Ribbons : 9
Re:EVGA Classified SR-2 Compatible Chassis'
2014/01/18 09:49:33
(permalink)
just hope it will work in my corsair 750 d case
|
sam nelson
iCX Member
- Total Posts : 365
- Reward points : 0
- Joined: 2014/01/06 21:07:07
- Status: offline
- Ribbons : 9
Re:EVGA Classified SR-2 Compatible Chassis'
2014/01/24 16:50:48
(permalink)
I finally got an SR-X mobo, new in the box, with full warranty. It has shipped and I will have it on Wednesday. Now then, time to start working on the rest of my planned build (To use 2 asus 4k 3d monitors, gameing reg. dream build lol, evga 1500 watt ps corsair 900d case 4 780 ti copper duel classified vid cards 4/480 g ssd set up in 2 raid's. Only thing not quite sure of is whether to go with 2 e5 2687 v2 or 2 e5 2697 v2) This is going to take me 6 to 8 months to do buying the parts a little at a time lol . Will be a full watercooled build, a first for me, so any help would be greatly appreciated with parts and set-up.
|
jbfem
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2008/11/01 04:34:10
- Location: Germany
- Status: offline
- Ribbons : 2
Re:EVGA Classified SR-2 Compatible Chassis'
2014/02/11 09:29:00
(permalink)
martammod TJ11 Spezial IATX!!!   
post edited by jbfem - 2014/02/11 09:32:00
copperHead 2.0 Project HP: coppermod.de  
|
scrapdark
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/05/18 04:49:03
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2014/05/18 04:50:12
(permalink)
does the board fit in the caselabs mercury s8?
|
fma67
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2014/05/20 13:54:18
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2014/05/28 07:25:58
(permalink)
|
spilart
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2010/12/25 15:31:51
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2014/10/02 13:58:37
(permalink)
Does the corsair 780t fit the sr2?
EVGA SR-2 ⓿ 2 Xeon X5690 @ 4.0Ghz ⓿ Kingston HyperX FURY 24GB @ 1866 Mhz ⓿ 2 Xigmatek Night Hawk white edition ⓿ Nvidia GTX 780 Ti ⓿ Xigmatek Elysium ⓿ Seasonic P-1000 80+ ⓿ Corsair Force GT 120 ⓿ WD Caviar Black 500Gb ⓿ WD Caviar Blue 500Gb ⓿ WD Caviar Green 1To ⓿ BenQ 24" RL2455HM ⓿ Creative GigaWork T40 ⓿ Creative Blaster X-fi ⓿ Mad Catz S.T.R.I.K.E. 5 ⓿ Logitech G600 Black
|
Shadowmeph
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2009/10/15 13:35:16
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2014/11/08 10:22:54
(permalink)
I cheapoed out and used a Cubitek HPTX-ICE CB-ICH-B509 HPTX
which I bought on sale for 79CAD
|
spilart
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2010/12/25 15:31:51
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2014/12/13 13:47:21
(permalink)
EVGA SR-2 ⓿ 2 Xeon X5690 @ 4.0Ghz ⓿ Kingston HyperX FURY 24GB @ 1866 Mhz ⓿ 2 Xigmatek Night Hawk white edition ⓿ Nvidia GTX 780 Ti ⓿ Xigmatek Elysium ⓿ Seasonic P-1000 80+ ⓿ Corsair Force GT 120 ⓿ WD Caviar Black 500Gb ⓿ WD Caviar Blue 500Gb ⓿ WD Caviar Green 1To ⓿ BenQ 24" RL2455HM ⓿ Creative GigaWork T40 ⓿ Creative Blaster X-fi ⓿ Mad Catz S.T.R.I.K.E. 5 ⓿ Logitech G600 Black
|
jayjay1986
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2015/02/11 06:05:14
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2015/02/20 02:51:24
(permalink)
will the sr2 fit in a corsair 750d ?
|
397807577637444
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2013/02/05 01:54:11
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2015/03/22 12:49:59
(permalink)
Nanoxia Deep silence 6 - Perfect Big Tower for SR-2, It's huge!
post edited by naeq3d - 2015/03/26 05:41:06
|
xxBenja
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2015/05/06 18:03:35
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2015/05/06 18:04:34
(permalink)
I'm running my SR-2 setup in a Lian Li PC-D8000, fits perfect :)
My setup:Lian Li PC-D8000 + D8001 + D8002 Evga Classified SR-2 2x x5680 6x Corsair XM3 2000 MHz DDR3 2x Corsair Vengance Red CL8 1600 MHz Geforce 9600 GT (I dont need grafics, but i have two 680 i plan to plug in if i find it necessary) 1x Corsair H100 1x Corsair H80 (Which i will switch to a H100 soon) 2x Kingston HyperX 240GB in Raid 0 1x Adaptec Raid 51245 1x Adaptec Raid 5805 12x 2 TB WD Red in Raid 6 8x 2 TB WD Red in Raid 5
|
bopamo
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2010/10/21 04:12:29
- Location: Santa Monica, CA
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2015/07/28 09:52:23
(permalink)
Does the SR-2 fit in the Cooler Master COSMOS II? I've heard rumors, but no actual photos.
|
bopamo
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2010/10/21 04:12:29
- Location: Santa Monica, CA
- Status: offline
- Ribbons : 0
Re: Compatible Chassis for EVGA Classified SR-X/SR-2
2015/07/28 09:55:41
(permalink)
da****ui
Greetings, everyone. I suggest you read this the whole, it helps a lot.
I've been following some of EVGA products, thinking on assembling a powerful PC some time on. I was searching for some info about the SR-X Mother Board and, well, actually I've got to this forum just "lurking" randomly through EVGA's site. So I have some interesting information to help with the topic.
The deal is as follows, I am an expert technician that likes to search for the best stuff, giving the best options and quality products... for users and myself. So I have invested a lot of time looking for the best options, covering every single detail, related with compatibility stuff of the EVGA SR-X Classified MoBo.
For this forum I've got some help for the ones looking for a compatible chassis for this HUGE MoBo. There are many brands producing Chassis, but most of them have the average (150 mm to 190 mm Width) x (370 mm to 410 mm Depth) x (300 mm - 350 mm Height) Chassis or whatever else, and few others have the right space for it, but leaving a little space for accessories, so that transforms a PC into a "messy connections matter". It's just frustrating if you are looking for a "unique" chassis to showoff with this kind of high performance equipment that really can fit comfortably to it.
Just going to what matters, and to what is related to this forum, my recommended chassis option for this Mother Board, and guess is the best and only option to get the most out of it, is the New Cooler Master chassis released a couple of months ago. This Chassis is not for the ones that want to put some lighting in, admire or showoff their PC components, because it has no translucent panel to look through, but it is one state-of-the-art chassis by itself to showoff. The chassis series name is "Cosmos II". This monster chassis features the next dimensions:
344 mm (W) x 704 mm (H) x 664 mm (D).
As my personal short description for it, I would summarize it as: Really useful, simple and user friendly, "spaceful", accessible, maneuverable, high durability, time saving accessory and component installation, customizable and cool as you want it to be. I leave pick of it at the end.
¿Why so huge? ¿Why do I recommend it? Copy the next line, Google it and enter the Cosmos II microsite to find it out:
Cooler Master Cosmos ii
There you can find its whole specifications, handbooks, guides, etc. in downloadable PDFs and more.
Contact me if you want to know more about compatible components for the EVGA Classified SR-X series Mother Board, and more.
What is required for an SR-2 to fit in this?
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Compatible Chassis for EVGA Classified SR-X/SR-2
2015/07/28 10:01:13
(permalink)
|
bopamo
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2010/10/21 04:12:29
- Location: Santa Monica, CA
- Status: offline
- Ribbons : 0
Re: Compatible Chassis for EVGA Classified SR-X/SR-2
2015/07/28 10:03:04
(permalink)
Vlada011
Nice! What kind of cooling system will/do you have in there?
|