ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Hi. I use Octane Render v2.17 demo plugin for 3ds max 2015 and I have GTX 780 Ti Classified with 353.06WHQL driver. This GPU uses all defaults (clock, VRAM, volts, power limit...). I got "warning: render is failed" after only ~30 minutes on my room with 27 ºC. How do I disable boost core for GPU due to the hot room (~27 ºC)?? NOTE: My old GTX 480 and 580 3GB got ZERO fails and amazing after renderer average 10 hours at ~10 images differents.
post edited by Scarlet-Tech - 2016/06/28 02:39:23
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 04:55:06
(permalink)
Cause of render failed is errors of Windows:Não é possível localizar a descrição do ID de Evento 13 a partir da origem nvlddmkm. O componente que desencadeia este evento não está instalado no computador local ou a instalação está danificada. Poderá instalar ou reparar o componente no computador local. Se o evento tiver tido origem noutro computador, as informações de apresentação têm de ser guardadas com o evento. Foram incluídas as seguintes informações com o evento: \Device\00000069 -> Graphics SM Warp Exception on (GPC 2, TPC 0): Out Of Range Address -> Graphics Exception: ESR 0x514648=0x1f000e 0x514650=0x0 0x514644=0x13eff2 0x51464c=0x7f
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6914
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 08:24:18
(permalink)
Have you tried using MSI Afterburner or EVGA PrecisionX to set a custom fan profile? I set my 780 TIs to max fan at 80C to prevent thermal throttling.
As far as disabling GPU boost, you can use those programs to turn on KBoost and set the clock speed you want.
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 08:31:40
(permalink)
FYI - I wouldn't use those drivers for your 780ti. If you read through the forums, many people have been complaining about any of the 350.xx and above drivers causing many crashes in many different programs.... I would wipe those drivers out , & do a fresh install of the 347.xx versions
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 10:25:23
(permalink)
arestavo Have you tried using MSI Afterburner or EVGA PrecisionX to set a custom fan profile? I set my 780 TIs to max fan at 80C to prevent thermal throttling.
As far as disabling GPU boost, you can use those programs to turn on KBoost and set the clock speed you want.
I use MSI AfterB 4.1.0 and custom fan with 100% fan speed since 72ºC or hotter. I got only almost 70 ºC and 65% power while rendering scene during some hours. NOTE: I don't like EVGA Precision X 16 because I can't appear OSD despite OSD checked... aka_STEVE_b FYI - I wouldn't use those drivers for your 780ti. If you read through the forums, many people have been complaining about any of the 350.xx and above drivers causing many crashes in many different programs.... I would wipe those drivers out , & do a fresh install of the 347.xx versions
Yeah. I'll downgrade to 347.xx but I'm worried because old driver may be not optimized for GTA V, pCARS...
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 11:02:39
(permalink)
Tried kboost but it doesn't support VGA DB15!?!?!?!???? Why?????
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6914
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 11:46:33
(permalink)
ricarnuninho Tried kboost but it doesn't support VGA DB15!?!?!?!???? Why?????
That looks to be a question for EVGA's Tech Support. I did a Google search and found a couple of others with that same issue, but nothing explaining why that was the case. Maybe if you use a DVI to VGA converter to get around it? As a last resort, there might be a VBIOS out there that disables the automatic overclock (maybe SLV7's?).
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 12:06:25
(permalink)
arestavoThat looks to be a question for EVGA's Tech Support. I did a Google search and found a couple of others with that same issue, but nothing explaining why that was the case. Maybe if you use a DVI to VGA converter to get around it? As a last resort, there might be a VBIOS out there that disables the automatic overclock (maybe SLV7's?).
Yes, DVI-VGA. Kboost enabled = boost disabled (1020 MHz core) - ok?
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6914
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/08 13:41:32
(permalink)
I think 1070 MHz is what the 780 Ti Kingpin's stock clocks are - but that looks fine. Really, if the card doesn't give you problems with GPU Boost 2.0 disabled (essentially what K-Boost does), you may want to see about a RMA because that shouldn't be an issue.
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/28 04:03:49
(permalink)
I tried 353.38 (hotfix)... but I got "warning: render is failed", using Octane Render VR 2.23 plugin for 3ds max. Error log of Windows: Não é possível localizar a descrição do ID de Evento 13 a partir da origem nvlddmkm. O componente que desencadeia este evento não está instalado no computador local ou a instalação está danificada. Poderá instalar ou reparar o componente no computador local.
Se o evento tiver tido origem noutro computador, as informações de apresentação têm de ser guardadas com o evento.
Foram incluídas as seguintes informações com o evento:
\Device\UVMLiteProcess7 -> Graphics Exception: ESR 0x524224=0x80000000 0x524228=0x0 0x52422c=0x0 0x524234=0x0 -> NVRM: Graphics TEX Exception on (GPC 4, TPC 0): TEX LAYOUT -> NVRM: Graphics TEX Exception on (GPC 4, TPC 0): TEX NACK / Page Fault -> Graphics Exception: ESR 0x524224=0x80000049 0x524228=0x20480001 0x52422c=0x0 0x524234=0x0
But... I got full load ~62 ºC and ~70-75% power at all stock speeds with boost 1150 MHz core.
post edited by ricarnuninho - 2015/06/28 04:14:11
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/06/29 14:19:58
(permalink)
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/02 01:16:10
(permalink)
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/05 06:48:53
(permalink)
Again fail at 4th time. Driver issue or bad videocard? HELP?
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6914
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/05 06:54:56
(permalink)
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/06 07:10:31
(permalink)
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/06 08:37:47
(permalink)
3rd photo edited because I have forgotten to "remove" s/n.
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/07 04:18:29
(permalink)
Please should respond my post #15!
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21159
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/07 08:45:08
(permalink)
Have you tried the OLDER driver yet, as was recommended? For more information, see this thread: http://forums.evga.com/Th...d-732015-m2359625.aspxTry driver 347.25. The 700 series products are "End Of Life" and the newer drivers tend not to work as well as time progresses.
post edited by ty_ger07 - 2015/07/07 12:32:32
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/10 03:49:58
(permalink)
ty_ger07 Have you tried the OLDER driver yet, as was recommended?
For more information, see this thread: http://forums.evga.com/Th...d-732015-m2359625.aspx
Try driver 347.25. The 700 series products are "End Of Life" and the newer drivers tend not to work as well as time progresses.
Tried uninstall 353.38hotfix, reboot pc to use DDU (display driver uninstaller) and select "clean and reboot" in safe mode, install 347.25WHQL in normal mode... but I got again render failed after 9 hours rendering. Error log of Windows:Não é possível localizar a descrição do ID de Evento 13 a partir da origem nvlddmkm. O componente que desencadeia este evento não está instalado no computador local ou a instalação está danificada. Poderá instalar ou reparar o componente no computador local.
Se o evento tiver tido origem noutro computador, as informações de apresentação têm de ser guardadas com o evento.
Foram incluídas as seguintes informações com o evento:
\Device\UVMLiteProcess1 -> Graphics Exception: ESR 0x525224=0x80000000 0x525228=0x0 0x52522c=0x0 0x525234=0x0 -> NVRM: Graphics TEX Exception on (GPC 4, TPC 2): TEX LAYOUT -> NVRM: Graphics TEX Exception on (GPC 4, TPC 2): TEX NACK / Page Fault -> Graphics Exception: ESR 0x525224=0x80000049 0x525228=0x20480001 0x52522c=0x0 0x525234=0x0
Bad videocard? Or please should respond my question in post #15.
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/10 05:16:59
(permalink)
350.12 WHQL is last good driver for series 700. That's my opinion. All drivers after that cause crash in idle in Google Chrome. That happen once in 3 day and than it's not big problem but with previous driver never happen.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21159
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/10 08:41:05
(permalink)
You went from render failed in 30 minutes to render failed in 9 hours just by changing the drivers. Pretty good! Try increasing the fan speed more. You are at, what, 96% fan speed speed at 70c? Why not just increase the fan to 100%?
post edited by ty_ger07 - 2015/07/10 08:44:22
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/10 09:02:52
(permalink)
ty_ger07 You went from render failed in 30 minutes to render failed in 9 hours just by changing the drivers. Pretty good!
Try increasing the fan speed more. You are at, what, 96% fan speed speed at 70c? Why not just increase the fan to 100%?
Ok but not much better but yes render time is random. I got ~12 hours by split without fail ... and total longest time without fail 43 hours in past weeks - Weird. Yesterday I got 76ºC@auto fan speed default (without any tool) after 56minutes of render without fail... aah! I ran EVGA Precision.
post edited by ricarnuninho - 2015/07/10 09:09:17
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21159
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/10 16:14:19
(permalink)
In my opinion, the next things to try are: 1) Try 100% fan speed to see if the small drop in temperature stabilizes the video card. You should be able to drop from 70-75c down to around 65-68c based on the temperatures and fan speeds you have provided. If this helps, good, but not really a great solution. Reset fan back to auto and test item 2 and 3 below. 2) Try decreasing the video card core clock, then try decreasing the video card memory clock. If one of those helps, you know where the problem lies. 3) Try increasing the video card core voltage. Does it help? 4) If neither item 2 or 3 help, it may not be your video card causing the render failure. Consider at that point that the system memory or CPU may have stability issues. Run memtest to test memory and prime95 or linx to test CPU (and memory). 5) If either item 2 or 3 helps, consider RMAing the video card.
post edited by ty_ger07 - 2015/07/10 16:17:06
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/11 03:25:46
(permalink)
ty_ger07 In my opinion, the next things to try are: 1) Try 100% fan speed to see if the small drop in temperature stabilizes the video card. You should be able to drop from 70-75c down to around 65-68c based on the temperatures and fan speeds you have provided. If this helps, good, but not really a great solution. Reset fan back to auto and test item 2 and 3 below. 2) Try decreasing the video card core clock, then try decreasing the video card memory clock. If one of those helps, you know where the problem lies. 3) Try increasing the video card core voltage. Does it help? 4) If neither item 2 or 3 help, it may not be your video card causing the render failure. Consider at that point that the system memory or CPU may have stability issues. Run memtest to test memory and prime95 or linx to test CPU (and memory). 5) If either item 2 or 3 helps, consider RMAing the video card.
Ok, I'll increase fan speed 100% constantly. Maybe decrease GPU clock. My CPU and RAM haven't stability issues because Octane Render does never use CPU to render but OR uses GPU only.
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21159
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/11 09:02:19
(permalink)
Octane Render may "only use your GPU", but your GPU only works when the CPU tells it what to do; every one of its instructions come to it from the program through the CPU. And your GPU uses system memory for swap space when necessary. Disconnect your video card from the motherboard. Does it keep rendering? No? I guess it needs the CPU and memory.
post edited by ty_ger07 - 2015/07/12 17:21:08
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/17 03:46:30
(permalink)
ty_ger07 Octane Render may "only use your GPU", but your GPU only works when the CPU tells it what to do; every one of its instructions come to it from the program through the CPU. And your GPU uses system memory for swap space when necessary.
Disconnect your video card from the motherboard. Does it keep rendering? No? I guess it needs the CPU and memory.
Ok. I would disconnect NV GPU but OR doesn't support any CPU nor iGPU (if my Intel HD 3000 onboard must support mboard with VGA and DVI ports). I decreased -84 MHz GPU core (from boost 1150 to 1066 MHz) and... I got no render failed. But I continue to test this until sunday.
post edited by ricarnuninho - 2015/07/17 04:15:07
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/19 12:14:09
(permalink)
Log of OctaneVR:Started logging on 19.07.15 18:29:32
OctaneVR 2.23.2 (2230002)
CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> kernel execution failed (pmc) device 0: PMC failed CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to copy memory to device. device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to deallocate device memory CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> could not get memory info CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to deallocate device memory CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> could not get memory info device 0: failed to upload data texture 1 of context 0 CUDA error 719 on device 0: An exception occurred on the device while executing a kernel. The context cannot be used anymore and must be destroyed. All existing device memory allocations from this context are invalid and must be reconstructed. -> failed to allocated device memory device 0: failed to upload data texture 4 of context 0 failed to tonemap render pass "Beauty" GPU Core speed isn't issue but I think... yes VRAM speed @stock is issue. -> Hynix may be bad brand, ok? -> Therefore, will I leave GTX 780Ti to EVGA-RMA?
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102028
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/19 12:31:00
(permalink)
If you reside in the United States call EVGA tech support: 888.881.3842
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2015/07/19 12:55:35
(permalink)
rjohnson11 If you reside in the United States call EVGA tech support: 888.881.3842
Ok but I live in Portugal. I can't call it but I've to write the message due to the my deafness.
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|
ricarnuninho
Superclocked Member
- Total Posts : 133
- Reward points : 0
- Joined: 2010/06/28 08:40:55
- Location: Porto, Portugal
- Status: offline
- Ribbons : 0
Re: GTX 780 Ti Classy: Render failed despite stock speeds
2016/05/24 04:08:11
(permalink)
Render is again failed with new error - https://render.otoy.com/f...c.php?f=25&t=54223 I'll leave GTX 780Ti Classy to RMA but if this GPU won't be fixed then I must want minimum GTX 980 Ti reference (NOT GTX 980 non-Ti with any OC edition). ;)
Intel Core i7-12700KF new 2x16GB RAM@DDR4-3600 new MSI PRO Z690-A DDR4 new EVGA GeForce GTX 980 Ti SC+ ACX 2.0+ SSDs: OCZ RD400 512GB+Crucial MX500 2TB HDD: 1TB SATA2 LG BD-RE w/ XL BH16NS40 SATA PSU: Aerocool Gold 80+ 1kW Case: NZXT Phantom 630 CRT monitor 21" Sony Multiscan E530
|